• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3352-3357
• /
• 2012

본 논문은 열매체(Synthetic Heat Transfer Fluid) 보일러의 화재원인을 분석하기 위하여 3차원 자동설계 프로그램인 CATIA를 활용하여 설계하였다. 또한 3차원 유한요소 코드인 ANSYS를 활용하여 설계된 열매체보일러에 대하여 구조해석을 실시하였다. 구조해석을 통하여 열매체보일러의 정상상태와 화재 후의 최대온도(maximum temperature), 최대응력(maximum stress), 최대변형율(maximum strain) 등을 구하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.295-298
• /
• 2006

메탄/질소-공기 저 신장율 대향류 확산화염에서 화염소화 거동과 에지화염의 진동불안정성에 대한 실험적 연구를 수행하였다. 특히, 저 신장율 화염에서 복사열손실 뿐만 아니라 측면전도 열손실이 현저해 진다. 각 전체 신장율에서 화염진동의 시작조건과 진동모드를 제안하였다. 화염길이는 측면 전도열손실과 밀접한 관계를 가지고 있으며 화염소화와 화염진동에 중대한 영향을 미친다. 저 신장율 에지화염의 진동모드는 성장모드, 감쇠모드 그리고 조화모드로 요약된다. 또한, 각 진동모드의 조건을 전체신장율과 희석제의 몰분율에 대한 안전화선도를 작성하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.323-324
• /
• 2012

Flammability limits of opposed flow diffusion flame in a narrow channel was investigated experimentally and theoretically. There were three different extinction modes corresponding to high strain rate (HSR), low strain rate (LSR) and dilution ratio (DR) limits. To investigate these limits, a theoretical study was followed by focusing on flow and heat transfer characteristics. Consequently, a dead space concept that has been used for premixed flames was important to reveal the heat loss mechanism in a narrow channel especially for LSR conditions even in the case of diffusion flames.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.181-190
• /
• 2004

The interest of the fatigue life of rubber components such as engine mounts is increasing according to the extension of warranty period of the automotive components. Automotive engine mounts get damaged due to thermal and mechanical loadings. This paper discusses a fatigue life prediction of the 3-dimensional dumbbell specimens for natural rubber compound considering the effects of maximum strain and heat aging temperature. Displacement controlled fatigue life tests were performed using specimens with different levels of maximum strain and various hardness. The basic mechanical properties test and the fatigue test of aged rubber specimen under normal and elevated temperature were executed. A procedure to predicted the fatigue life of vulcanized natural rubber material based on the maximum strain method was proposed, and then this curve was in good agreement with fatigue test data less than 200% error range.

• 열처리공학회지
• /
• 제35권5호
• /
• pp.255-261
• /
• 2022

In this work, the strain-amplitude independent and strain-amplitude dependent damping capacities of Mg-5%Sn alloy have been investigated as a function of its age-hardening response. The hardness increased with an increase in aging time, reached a peak value after 48 h, and then it gradually decreased. The damping capacities of the Mg-5%Sn alloy exhibited a decreasing tendency in the order of solution-treated, under-aged, peakaged, and over-aged states in the strain-amplitude dependent region, whereas they increased continuously with aging time in the strain-amplitude independent region. The microstructural examination during aging revealed that the lower concentration of Sn solutes in the α-(Mg) matrix and the lower density of the Mg₂Sn precipitate particles may well be the crucial factors for better damping values in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.303-306
• /
• 2003

To reduce the storage space of spent fuels used at the atomic power plants all over the world, the uranium elements contained in the spent fuels is being extracted and effectively stored. For this, the spent fuel are oxidized and deoxidized. In this study, it is produced conceptual design specification about the spent fuel management technology research and test facilities have been produced. The first considered processes in the facilities is the metal conversion furnace in the dry environment. Since this process is operates at the high temperature range, we have to consider heat-resisting designs for the device. For the heat-resisting designs, we have surveyed and analyzed technical references for material properties. Also, we have determined the temperature distribution condition of the device based on experimental results. We have calculated thermal stress and strain of each devices by the commercial analysis software, I-DEAS. By using the results, we have analyzed design configurations of the point at issue by thermal effects, and suggested alternative design configurations. It is experimented for inspecting confidence rate of heat strain. Based on these results, necessary design specifications for heat-resisting design have been produced.

• Journal of Welding and Joining
• /
• 제12권1호
• /
• pp.73-79
• /
• 1994

Low cycle fatigue test was performed by companion specimens method to compare the properties of cyclic strain for the weldments of controlled rolling steel CR60 and welding structural steel SM58Q. And the result does not showed any difference of low cycle fatigue life between weldments. Especially, the values of coefficient of cyclic plastic strain $C_{p}$ and exponent of cyclic plastic strain $K_{p}$ of heat affected zones of CR60 steel and SM58Q steel were same. And $C_{p}$ and $K_{p}$ of CR60 steel were equal to the values of weld it means a good combination between the base metal, the heat affected zone and the weld of CR60 steel.eel.eel.

• 미생물학회지
• /
• 제47권2호
• /
• pp.167-169
• /
• 2011

Saccharomyces cerevisiae ${\Sigma}1278b$ 균주는 FLO8 유전자를 가지고 있는 반면, S288c 균주는 flo8 정지돌연변이를 포함하고 있어서 반수체의 부착 생장, 배수체의 위균사형 생장 및 생물막 형성 현상을 보이지 않는다. S. cerevisiae의 LAMMER kinase인 ScKns1의 기능을 파악하기 위한 온도 감수성 실험을 수행한 결과, S288c 균주와 달리 ${\Sigma}1278b$ 균주가 $37^{\circ}C$의 열 스트레스에 민감함을 발견하였으며, 흥미롭게도 $Sckns1{\Delta}$ 돌연변이가 이러한 감수성을 회복시킴을 확인하였다. 또한 ${\Sigma}1278b$ 균주의 열 감수성은 삼투안정제인 sorbitol의 첨가에 의해 회복되었다. 이러한 결과는 Flo8은 ScKns1이 연관된 열 스트레스를 조절하는 신호전달경로를 구성할 가능성을 제시한다.

• Safety and Health at Work
• /
• 제10권2호
• /
• pp.219-223
• /
• 2019

Background: Ice cooling vests can cause tissue damage and have no flexibility. Therefore, these two undesirable properties of ice cooling vest were optimized, and the present study was aimed to compare the impact of the optimized ice cooling vest and a commercial paraffin cooling vest on physiological and perceptual strain under controlled conditions. Methods: For optimizing, hydrogel was used to increase the flexibility and a layer of the ethylene vinyl acetate foam was placed into the inside layer of packs to prevent tissue damage. Then, 15 men with an optimized ice cooling vest, with a commercial paraffin cooling vest, and without a cooling vest performed tests including exercise on a treadmill (speed of 2.8 km/hr and slope of %0) under hot ($40^{\circ}C$) and dry (40 %) condition for 60 min. The physiological strain index and skin temperature were measured every 5 and 15 minutes, respectively. The heat strain score index and perceptual strain index were also assessed every 15 minutes. Results: The mean values of the physiological and perceptual indices differed significantly between exercise with and without cooling vests (P < 0.05). However, the difference of the mean values of the indices except the value of the skin temperature during the exercises with the commercial paraffin cooling vest and the optimized ice cooling vest was not significant (P > 0.05). Conclusions: The optimized ice cooling vest was as effective as the commercial paraffin cooling vest to control the thermal strain. However, ice has a greater latent heat and less production cost.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.64-69
• /
• 1999

PANrP 탄소섬유의 고온연신에서의 변형 거동을 검토하기 위해서, 일정 하중하에서 내부저항 가열법에 의해 $1200^{\circ}C$부터 $2200^{\circ}C$까지 열처리 온도를 변화시키며 섬유의 strain 변화를 측정하였다. 부하된 응력이 증가함에 따라서 strain 변화가 크게 발생하며 또한 열처리 온도 약 $1700^{\circ}C$를 경계로 해서 그 온도 이상과 이하 사이에는 큰 차이를 보였다. 각 응력에 있어서의 strain 속도 변화로부터 얻어진 활성화 에너지는 70 MPa 및 322 MPa에 대하여 각각 67.46 및 52.27 kJ/mol로써, 큰 응력의 경우가 작은 응력을 부하하는 것 보다 섬유구조 발달에 있어서 더욱 효과적이라는 것을 알았다.