• Journal of Dairy Science and Biotechnology
• /
• 제34권3호
• /
• pp.199-202
• /
• 2016

Processing methods of heat treatment in milk has been developed to increase safety for the consumer by destroying pathogens that may be found in milk. Commercial pasteurization of milk in the market started in the late 1800s in Europe and in the early 1900s in the United States. In 1962, it became a requirement in Korea that all milk for sale should be treated by heat. Nowadays, heat treatment (pasteurization or sterilization) became mandatory for all milk products sold in all over the world. However, since 1987, there was a big debate about the heat-treatment of milk. Korea Society of Dairy Science and Technology (KSDST) complied the 10 scientific articles of milk heat-treatment into the book which titled "Effects of the heat-treatment on the nutritional quality of milk". Almost several hundred copies had been distributed at the symposium KSDST in 1989. Currently, no one was able to find these articles in anywhere including library etc. Thus, author decided to re-write that books in serials because these articles should be pass on their knowledge of milk science to the next generation of milk research.

• 한국식품영양과학회지
• /
• 제29권6호
• /
• pp.1035-1041
• /
• 2000

멸치 액젓의 새로운 위생화 방법으로 감마선 조사기술을 이용하였고, 산업적 생산에 응용하고자 기존의 가열살균 및 정밀여 과방법과 비교하여 미생물학적, 이화학적 및 관능적 품질변화를 조사하였다. 감마선을 조사한 멸치 액젓은 미생물 제어에 효과적 인 것으로 나타났으며 조사선량이 증가함에 따라 색이 밝아지는 등 외관적으로 긍정적인 효과를 보였다. 또한 저장 기간 중 pH, 염도 및 점도 등의 변화 없이 품질이 유지되었고, 색, 향, 맛 및 종합적 기호도 등 관능적 측면에서도 대조구와 가열살균 시험구에 비해 높은 선호도를 나타내어 정밀여과 시험구와 마찬가지로 우수한 품질을 나타내었다 감마선 조사구 중 5kGy의 선량을 적용할 때 미생물학적 및 관능적 품질이 가장 적합한 것으로 나타났다. 따라서 멸치액 젓 에 감마선을 조사함으로써 가열살균 및 정밀여과 방법과 비교할 때 품질의 변화 없이 우수한 멸치 액젓을 생산할 수 있었으며, 산업적 대규모 생산에 새로운 위생화 기술로서 이용할 수 있는 가능성을 제시하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.50-56
• /
• 2007

본 연구에서는 각종 병해충 감염목의 열처리 조건으로 목재 중심부 온도를 $56^{\circ}C$에서 30분 이상 처리해야 한다는 FAO 열처리 기준(International standards for phytosanitary measures (ISPM) No. 15)을 적용하여 소나무 재선충 감염의 확산을 막고 감염목을 용재로서 사용할 수 있게 하기 위하여 국산 소나무의 열처리특성을 분석하였다. 온도와 습도 및 함수율별 열처리속도 측정을 통하여 목표온도 도달시간을 분석하고 소비에너지를 평가하여, 열처리 공정 적용 기술개발의 기초 자료를 확보하고자 하였다. 열처리 시 함수율이 높을수록, 직경이 클수록 열처리 소요시간과 소요에너지가 증가하였고, 고온 고습 조건이 열처리 소요시간을 단축시켰다. 열처리기 현장투입 시 적절한 열처리공정 제어를 위해서는 열악한 주위환경 조건, 처리기 가동성능의 변화, 고습적용이 불가능한 상황 등을 고려한 다양한 온도 습도 조건에서의 가열과 냉각 시 소비되는 에너지 평가와 소요시간 예측이 필요하다.

• Preventive Nutrition and Food Science
• /
• 제20권1호
• /
• pp.60-66
• /
• 2015

The aim of this study was to determine the heat-penetration characteristics using stationary and rotary retorts to manufacture Kimchi soup. Both heat-penetration tests and computer simulation based on mathematical modeling were performed. The sterility was measured at five different positions in the pouch. The results revealed only a small deviation of $F_0$ among the different positions, and the rate of heat transfer was increased by rotation of the retort. The thermal processing of retort-pouched Kimchi soup was analyzed mathematically using a finite-element model, and optimum models for predicting the time course of the temperature and $F_0$ were developed. The mathematical models could accurately predict the actual heat penetration of retort-pouched Kimchi soup. The average deviation of the temperature between the experimental and mathematical predicted model was 2.46% ($R^2=0.975$). The changes in nodal temperature and $F_0$ caused by microbial inactivation in the finite-element model predicted using the NISA program were very similar to that of the experimental data of for the retorted Kimchi soup during sterilization with rotary retorts. The correlation coefficient between the simulation using the NISA program and the experimental data was very high, at 99%.

• 한국식품영양학회지
• /
• 제31권5호
• /
• pp.737-750
• /
• 2018

Effects of acid soaking (AS) and thermal sterilization (TS) on the shape and quality characteristics of Tteokbokki rice cake (TRC) were investigated. The F-value of a sequential process (SP) of the combination of AS and TS was quantitatively determined with a reference microorganism of Bacillus cereus. F-values were evaluated according to the minimum and the maximum D-value of B. cereus and the reduction exponent (m=12). The heat penetration curves at cold point (CP) of TRC (400 g) were used to estimate the TS time at 121, 100, and $95^{\circ}C$. F-values of the SP were revised according to the adjusted m values after AS at different pH. The non-uniformity parameters (NUP) of TRC had no significant changes during AS but it dramatically increased after applying TS at a low pH by AS. The result of solubilized starch contents (SSC) demonstrated that the shape changes during SP are related to SSC. The texture characteristics and the whiteness were significantly influenced by a low pH condition (3.5) (p<0.05). Sensory analysis showed that a lower pH and a longer thermal processing time influenced negatively on the acceptability. This study showed that pH 4.0 and $95^{\circ}C$ was an optimum condition for the SP.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.391-398
• /
• 2001

A robot system for clone replication and gridding, which is a preliminary state of the genome research, was developed and evaluated its performance. This gridding robot system consisted of 1) a gridding heat that replicated the clone, 2) a manipulator, as a part of body of robot, which transferred the gridding head along x-, y-, z-axis, 3) a well plate arranging board, 4) a sterilization unit, and 5) a control unit. Performance of the system was evaluated with 1) repeatability of the robot system, 2) clone replication efficiency, 3) time requirement of the replication, and 4) sterilization efficiency. The repeatability error of the robot system showed 0.219 mm and 0.094 mm in the direction of x- and y-axis, respectively. The success rate of the clone replication with the gridding head was 100% on the membrane filter. The time required for the replication was four minutes and fifty-five seconds from the four 96 well plates to a 384 well plate meanwhile the required time with well experienced hand labor was three minutes thirty-five seconds. The gridding operation of clone could not be done by hand labor and the required time with robot system for the gridding on the membrance filter with the control program 5$\times$5: 1 copy and 384 gridding pins was twenty minutes and twenty-five seconds. The efficiency of the sterilization was considered to be satisfactory since no growth of fungi was found around the area of replication in the membrane filter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.607-610
• /
• 2003

Ozonic use of sterilization and heat treatment of raw material to extend the conservation period of food recently is increased by hard vegetable or microorganism sterilization purpose of fruit. If ozone can create as is easy comparatively because do air or oxygen by raw material and schedule period passes, there is advantage that do not leave the second contaminant because being gotten restored by oxygen. Also, because the effect is big to decolorization beside disinfection effect about microorganism, deodorization, disjointing of venomousness hazardous substance, food save, Indoor air purge, good hand processing, hydrospace agricultural chemicals processing etc. the use extent is wide. This research ran parallel a sterilization experiment of E.coli colitis germs by ozone that manufacture ozonizer that use doped diamond maund electrode (BDD) by boron and searched special quality electrochemistry enemy of the ozonizer and is created. After cultivate E.coli colitis germs during 37C 1 day is LB ship, after do ozonation, was sterilized more than 90% by ozone as result that examine disinfection effect by substance microscope and could confirm excellency of diamond electrode.

• 식품과학과 산업
• /
• 제53권3호
• /
• pp.284-294
• /
• 2020

고전압 펄스 전기장 기술은 전기 에너지를 활용한 친환경적 비가열 공정 기술로서 꾸준히 업계의 관심을 받고 있다. 장치에 대한 이해의 부족과 장비가격에 대한 부담으로 실제 상업적 적용이 크게 증가하지 않고 있으나 가열 공정을 대체할 수 있는 기술로서의 가능성은 지속적으로 제기되고 있다. PEF 공정을 이용한 식품의 살균은 지금까지는 대부분 과일 및 야채 주스 등 저점도의 액체 식품의 살균에 대해 적용되어 왔으나 최근에는 고점도의 스무디, 고농도 단백질 음료, 혼합 주스, 알코올 음료 등으로 적용 범위가 확대되었으며, 분말, 생육 등 고체 식품의 살균에 대한 연구도 진행되고 있다. 살균 이외에도 색소, 유용성분의 추출 및 회수, 생리활성물질의 활성화, 건조의 전처리 등의 식품 공정뿐만 아니라 씨앗의 발아율 증가, 육제품의 육질 변화, 전분의 물성 변화 등에 대한 적용이 연구되면서 기존의 식품 공정을 보완 또는 대체할 수 있는 기술로서 기대되고 있다.

• Journal of Dairy Science and Biotechnology
• /
• 제33권3호
• /
• pp.223-229
• /
• 2015

Milk is a food with high nutritional value as it contains abundant water, proteins, vitamins, lactose, fat, minerals, enzymes, etc. However, in order to make milk suitable for intake, it should be thermally treated to eliminate microbiologically hazardous factors. Heat treatment is an essential sanitation process for milk, but various precautions must be taken in order to process and preserve it. Therefore, various techniques should be developed to minimize the nutrient loss and to ensure that milk is safe for consumption, conservation, and distribution. However, the existing thermal pasteurization methods are harmful and increase the nutrient loss; moreover, no new thermal pasteurization methods are being researched that are safe for the human health and minimize the nutrient loss. Hence, this study aims to review new processes for thermal (low temperatures) and no thermal pasteurization methods that can minimize the nutrient loss during milk pasteurization.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권12호
• /
• pp.1711-1717
• /
• 2017

Objective: This experiment was studied the effects of various levels of crude glycerin (CG) in dairy goat diet on daily intake, milk yield, milk composition, some physical properties and some quality changes of goat milk after sterilization. Methods: Twelve 75% Saanen dairy goats (body weight = $49{\pm}3kg$; days in milk = $60{\pm}12d$) were randomly assigned in a completely randomized design to evaluate the effects of three experimental diets consisting of 0%, 5%, and 10% CG (dry matter basis) which were formulated to meet or exceed the nutrient requirements of goats. Experimental dairy goats were evaluated for feed and milk yield. Milk samples were analyzed for their composition, including fatty acids, casein profile, fat globule size, and color, and were sterilized to evaluate milk heat stability. Results: There were no significant differences between 0% and 5% CG treatments infeed. Increasing CG supplementation from 0% to 5% increased milk yield from $2.38{\pm}0.12$ to $2.64{\pm}0.23kg/goat/d$. In addition, milk samples from 5% CG treatment had the highest total solids, fat content and lactose content, and largest fat globule size. Increasing CG to 10% resulted in a decrease in milk fat. After sterilizing at $116^{\circ}C$, $F_0=3min$, goat milk samples from 5% CG treatment had slightly higher sediment content and comparatively higher degree of browning. Conclusion: Considering milk yield, milk fat content and quality of sterilized milk, 5% CG supplementation in a total mixed ration has a potential for implementation in dairy goats.