• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.55-65
• /
• 2013

Sterilization of Neurospora crassa has been investigated in this research by using a surface air plasma with dielectric barrier discharged (DBD) structure under atmospheric pressure. The sinusoidal alternating current has been used in this experiment with discharge voltage of 1.4~2.3 kV. The phase difference between the voltage and current signals are found to be almost 80 degree due to the capacitive property of dielectric barrier. Temperature on the biomaterials has been minimized by radiating the heat with the air cooling system. It is noted that the substrate temperature remains under 37 degree for plasma exposure time of 10 minutes with operation of cooler system. It is found that the ozone, $O_3$, has been measured to be about 25~30 ppm within 1 cm region and to be about 5 ppm at the 150 cm downstream region away from the suface plasma. It is also noted that the nitric oxide, NO, and nitric dioxide, $NO_2$, are not nearly detected. Germination rate and mitochodrial activity of Neurospora crassa immersed in the deionized water have been found to be drastically decreased as the plasma treatment time and its electrical power are increased in this experiment. Here, the mitochondrial activity has been analyzed by MTT (3-(4,5-dimethy lthiazol-2yl)-2,5-diphenyl-2H-tetrazolium bromide) assay. However, sterilization of Neurospora crassa immersed in the Vogel's minimal media has been found to be low by plasma treatment, which is caused by surrounding background solution. This research shows the sterilization possibility of Neurospora crassa by using the noncontated surface DBD plasma, which is different from the plasma jet. This is mainly attibuted to the reactive species generated by the surface plasma, since they play a major role for inhibition of micobes such as Neurospora crassa.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.4
• /
• pp.583-587
• /
• 2020

Imitation fish roe (IFR) based on calcium alginate hydrogels (CAG) can be heat treated for sterilization and salted to prolong the shelf life. However, these processes change the physical properties of IFR, and it is necessary to minimize these changes. In this study, we investigated the effects of xanthan gum (XG) treatment on the quality and stability of IFR. Both non-XG and XG-treated IFRs were treated with boiling water (95℃), sodium chloride (0.5-2.0%, w/v), and autoclaving. The non-XG treated IFR shrunk slightly after the boiling water and autoclaving processes. By comparison, shrinkage of the XG-treated IFR after autoclaving was significantly reduced. The sphericity of the non-XG treated IFR was reduced by the boiling water, sodium chloride, and autoclaving treatment. However, the sphericity of the XG-treated IFR was maintained by 90% or more, preserving the IFR shape at a level visually recognized as spherical. In addition, unlike the non-XG treated IFR, the XG-treated IFR showed high rupture strength even after the salt and heat treatments. Our findings provide useful information for the industrialization of IFR based on CAG with heat and salt treatments.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.132-138
• /
• 1998

This study was conducted to evaluate the storage stability of danmooji(salted radish) treated with high hydrostatic pressure $(300{\sim}686\;MPa)\;and\;heat\;(55^{\circ}C)$. Danmooji pressurized at 500 MPa and 686 MPa for 5 min showed $4{\sim}6log-cycle$ reductions in total microorganism, while danmooji heated at $55^{\circ}C\;for\;2\;hr\;showed\;3{\sim}5log-cycle$ reductions. However, danmooji pressurized at 300 MPa for 5 min showed a 2 log-cycle reduction, indicating that pressurization at lower than 300 MPa is insufficient for sterilization. After pressurized at 300 MPa, 500 MPa and 686 MPa for 5 min, pectinesterase (PE) activity of danmooji was increased by approximately 35%, 76% and 64%, respectively; and polygalacturonase (PG) activity of danmooji was increased by 109%. 163% and 120%, respectively. After heated at $55^{\circ}C$ for 2 hr, PE and PG activities of danmooji were increased by 18% and 200%, respectively. This indicates that PE in danmooji was more activated bypressure than heat, while PG was mostly activated by heat. Pressurized and heat-treated danmooji had higher hardness than control and maintained its hardness during storage at $30^{\circ}C$.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.479-486
• /
• 2010

Tolerance against heat, sanitizers, and antibiotics of 112 Cronobacter isolates classified by desiccation was determined to permit effective biocontrol in powdered foods. The isolates were classified into three groups: dry-tolerant (n=37), dry-sensitive (n=7), and dry-intermediate (n=68). The strains that were highly tolerant to drying also showed high heat tolerance that they seemed to have high tolerance to heat after dry stress in powdered foods like infant formula. Sodium hypochlorite and benzalkonium chloride concentrations necessary to achieve a 5-log reduction in viable counts (CFU/mL) were 15-25 ppm and 5-15 ppm, respectively. However, there was little difference of the efficacy of these sanitizers between dry-sensitive and -tolerant strains for planktonic cells suspended in 3% albumin. The minimal inhibition concentration (MIC) of $\beta$-lactam ampicillin was 64-128 ppm for 90% of the strains. The isolates were consistently sensitive to kanamycin and naldixic acid (MIC=4 ppm). Dry-tolerant strains displayed more antibiotic resistance than dry-sensitive strains. The results indicate that dry-tolerant Cronobacter isolates often possess heat and antibiotic resistance, indicated the need for potent sterilization treatments of powdered foods.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.531-537
• /
• 2006

This study was conducted to evaluate the combined effect of heating and gamma irradiation on the shelf-stability and quality of kimchi during storage at $35^{\circ}C$. The optimum condition for heat treatment of kimchi was considered at $60^{\circ}C$ for 30 min. Irradiation after kent treatment was effective to inhibit the growth of microorganisms and prevent the quality change of kimchi during storage. In particular, microorganisms of kimchi co-treated with heat and 20 kGy-irradiation were not detected and sensory scores of that were the highest after storage at $35^{\circ}C$ for 14 days. Therefore, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of kimchi in the accelerated condition.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.183-188
• /
• 2002

The ohmic heating of foods for sterilization provides a shorter come-up time compared to conventional thermal processes. The electric fields as well as the heat generated by ohmic heating facilitate germicidal effects. In the present study, the effect of ohmic heating on the structure and permeability of the cell membrane of yeast cells, Saccharomyces cerevisae, isolated from Takju (a traditional Korean rice-beer), was investigated. The ohmic heating was found to translocate intracellular protein materials out of the cell wall, and the amount of exuded protein increased significantly as the electric field increased from 10 to 20 V/cm. As higher frequencies were applied, more materials were exuded. Compared to conventional heating, more amounts of proteins and nucleic acids were exuded when these cells were treated with ohmic heating. The molecular weights of the major exuded proteins ranged from 14 kDa to 18 kDa, as analyzed by Tricine-SDS PAGE. A TEM study also confirmed the leakage of cellular materials, thus indicating irreversible damage to the cell wall by ohmic heating. It was, therefore, concluded that the electric fields generated by ohmic heating induced electroporation, causing irreversible damage to the yeast cell wall and promoting the translocation of intracellular materials.

• Korean Journal of Microbiology
• /
• v.11 no.2
• /
• pp.101-106
• /
• 1973

The microwave of 2450 MHz, generated by a household cooking oven, was evaluated for its applicability to melt various rehydrated media and to remove dissolved oxygen from tubed media for anaerobic culture. The effect on the sterilization of E. coli in selective media was also evaluated. The following results were obtained. 10 The microwave oven was useful in saving time for melting media and in eliminating heat and combustion gas from the laboratory, which were inevitable by-products in the conventional flame method. 2) Dissolved oxygen could be removed without boiling over by exposing the tubes of anaerobic culture medium after putting them in a wire basket in a beaker with water. 30 The count of E. coli during the melting of MacConkey and EMB agar were similar to those treated with open flame. The microwave treatment was not considered a possible mean to replace autoclaving even in these selective media.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.3
• /
• pp.370-376
• /
• 2015

In this study, we compared the organoleptic and other qualities of fermented milk containing 10 or 15% purple carrot extract that had either been previously fermented with Aspergillus oryzae or not fermented. Fermentation characteristics, pH, chromaticity, viscosity, viable cell counts, and sensory evaluations were measured. The pH and acid values did not differ between purple carrot extract fermented with Aspergillus oryzae and non-fermented extract. Viable cell counts were significantly higher in 15% purple carrot extract fermented with Aspergillus oryzae compared to the control after fermentation. Regarding characteristic changes, purple carrot extract fermented with Aspergillus oryzae group showed a lower red value but higher yellow value compared with non-fermented purple carrot extract due to heat-sterilization. Both fermented and non-fermented extract groups showed significantly increased viscosity compared to control. In the sensory evaluation, 15% purple carrot extract fermented with Aspergillus oryzae showed the highest score. In conclusion, addition of 15% purple carrot extract fermented with Aspergillus oryzae resulted in a superior fermented milk product.

• KIEAE Journal
• /
• v.10 no.1
• /
• pp.19-24
• /
• 2010

Modern people are spending most of time in interior area. Indoor air environmental problem is one of the most effective factors influenceable to human health. Furthermore, saving energy and making ventilation system for pleasant indoor environment are necessary when it is faced shortage of energy over the world. In our country's case, it is already imposed that required quantity of air ventilation in buildings is 0.7 times per hour on "The regulation on building engineering system". As on the rise of the interests about Indoor air environment, Heat and Carbon dioxide emissions from User's metabolism, activity, furniture, and construction materials etc. could be the causes of Indoor air pollution. If these materials stays in Indoor air for so long, it could directly influence the user's health condition with a disease. As of building's sterilization improved that raised more mechanical ventilation. It also leads much energy waste in a period of high price of fossil fuel. Therefore, the way that saves energy and effective control of indoor ventilation is urgently needed. So, this study places the purpose on validating volume of indoor ventilation and user's comfortable degree by comparison CO2 emission rate through changing floor temperature.