• 한국농공학회지
• /
• 제22권1호
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• 한국조경학회지
• /
• 제43권4호
• /
• pp.98-111
• /
• 2015

도시개발과 기후변화로 인해 증가하는 도시침수, 지하수 고갈, 하천오염 그리고 도시 열섬 현상 등의 환경문제는 도시 물순환 회복을 통해 경감시킬 수 있다. 효과적인 물순환 회복 계획수립을 위해서는 개별 사업이나 소규모 시설에 대해 물수지 현황과 변화를 면적으로 나타낼 수 있는 지도형태의 분석틀이 필요하다. 이를 위해, 토양-식생 기반의 물수지 모델 BAGLUVA의 구조를 분석하고, BAGLUVA 모델의 수문요소와 입력자료와 관련된 우리나라 관련 연구결과에 대해 조사하였다. BAGLUVA 모델은 기후, 토지이용, 지형, 토양수문 그리고 관개 등의 5가지 부문으로 구성된다. 5가지 구성요소의 상호 연계 구조와 개별 입력데이터 그리고 지형 계수, 최대증발산 비율, 유효근권 등의 개념과 적용 방법을 비교 분석하였다. 그리고, 실제 증발산량-잠재증발산량-강수량 간의 관계를 매개하는 Bagrov 계수의 산정 방식을 나타내었다. 면적단위의 토지이용별 물순환지도(Hydrotope Map)를 통해, 임의의 소규모 지역 물수지 현황을 효과적으로 파악할 수 있다. 그리고, 물순환 보전 및 관리를 위한 분산형 빗물관리, 저영향개발(LID) 시설의 계획 설계 상의 목표량 설정을 공정하고 용이하게 수행할 수 있다. 또한, 수자원 관리를 조경 및 도시계획에 통합시키는 유용한 도구이다.

• 한국산업융합학회 논문집
• /
• 제6권1호
• /
• pp.65-71
• /
• 2003

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 5~50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of red peppers. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the red peppers. Energy for moisture evaporation is supplied by the infrared radiant energy. The equations were validated with experimental data on surface temperature and average moisture content of red peppers. Average deviations of predicted surface red peppers temperature and average red peppers moisture from experimental data were 323~353K and 50~80%, respectively. The spectral extinction coefficients in the wavelength range $1.5<{\lambda}<27$ micrometer at 293K for Red Peppers were determined from results of reflection measurements and the four flux radiative heat transfer calculation. The radiation extinction coefficients were obtained from effective drying factor the temperature 373K.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.60-65
• /
• 2001

To simulate the real molding conditions, the effects of phase change and compressibility of the resin were considered in the present investigation. A modified Cross model with either an Arrhenius-type or WLF-type functional form was used for modeling viscosity of the resin. A double-domain Tait equation of state was employed to describe the compressibility of the resin during molding. The energy balance equation including latent-heat dissipation fur semi-crystalline materials was solved in order to predict the solidified layer and temperature profile. Injection molding experiments were carried out using polypropylene(PP) in the present study. Based on the comparison between experiments and simulations, it was found out the predicted pressure distributions and melt front propagations were accurate. Thus it was concluded that the program developed in this study was proved to be useful in simulations of injection molding process.

• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.111-119
• /
• 1996

본 연구에서는, 농업생산시설내 환경조절을 위한 시뮬레이터의 기본 시스템을 구축하고, 실내환경을 조절하면서 실측치와 예측치를 비교함으로써 적용성을 검토하였다. 모델은 비정상상태의 에너지 및 물질수지에 근거하여 구축되었고, PCSMP를 사용하여 아날로그형 프로그램이 가능하였다. 본 연구의 결과를 요약하면 다음과 같다. 구축된 환경조절용 시뮬레이터의 기본시스템은 기본모델, 광환경모델, 환경제어모델로 구성되어서 상호 독립적인 개발이 가능하였다. 기본모델은 본 시스템의 주요 부분으로써 열환경모델, 재배모델, 환기모델, 토양모델, 탄산가스모델을 구성되었고, 환경제어모델은 보온커텐, 냉난방기 및 지중열 교환을 고려하였다. 실제로 환경조절이 실시되고 있는 온실의 주간 및 야간의 실내온도의 실측치와 모델에 의한 예측치를 비교한 결과, 비교적 잘 일치되어서 그 적용성이 확인되었다.

• 한국해안해양공학회지
• /
• 제8권2호
• /
• pp.123-136
• /
• 1996

본 연구에서는 시 공간적으로 변화하는 밀도구조를 고려한 3차원 연직함수 전개모형을 제안한다. 정수압을 가정하며 열보존식과 상태방정식의 도입으로 밀도변화가 고려된다 수평방향으로의 변화는 유한 차분 격자상에서 계산되며 유속 및 수온의 연직구조는 선형보간함수를 사용하여 계산된다. 구성된 행렬방정식은 유사변환 개념을 도입하여 시간적분된다. 개발된 모델의 테스트를 위해 간단한 이상해역과 황해역에서 대기와 해양간의 열교환에 따른 수온구조 변동을 실험하였다. 이류효과는 열수송방정식에서만 고려하였으며 연직 와동점성계수와 와동확산계수는 시 공간적으로 일정한 값을 사용하였다. 이상해역에서의 수치실험결과 모델영역의 수심의 차이에 따른 열저장의 차이로 인해 수온의 수평적 구배가 발생하였다. 결과적으로 전향력을 고려하지 않을 경우에는 상층에서는 수심이 증가하는 방향으로 흐름이 발생하고 하층에는 반대방향의 흐름이 유도된 반면 전향력을 고려할 경우에는 수온차에 의한 압력구배력과 전향력이 균형을 이루면서 지형류가 뚜렷하게 나타났다. 황해역에서는 복잡한 흐름이 나타났지만 전체적으로는 지형류의 특성이 우세하게 나타났다.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.209-224
• /
• 2001

The SSC-K system analysis code is under development at the Korea Atomic Energy Research Institute (KAERI) as a part of the KALIMER project. The SSC-K code is being used as the principal tool for analyzing a variety of off-normal conditions or accidents of the preliminary KALIMER design. The SSC-K code features a multiple-channel core representation coupled with a point kinetics model with reactivity feedback. It provides a detailed, one-dimensional thermal-hydraulic simulation of the primary and secondary sodium coolant circuits, as well as the balance-of-plant steam/water circuit. Recently a two-dimensional hot pool model was incorporated into SSC-K for analysis of thermal stratification phenomena in the hot pool. In addition, SSC-K contains detailed models for the passive decay heat removal system and a generalized plant control system. The SSC-K code has also been applied to the computational engine for an interactive simulation of the KALIMER plant. This paper presents an overview of the recent activities concerned with SSC-K code model development This paper focuses on both descriptions of the newly adopted thermal hydraulic and neutronic models, and applications to KALIMER analyses for typical anticipated transients without scram.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.60-60
• /
• 2017

It is important to measure the gas exchange activity of the crops in canopy scale to understand the process of biomass production and yield formation. Thermal imaging of the canopy surface temperature is a powerful tool to detect the gas exchange activity of the crop canopy. The simultaneous measurement of the canopy temperature and the meteorological data enables us to calculate the canopy diffusive conductance ($g_c$) based on the heat flux model (Monteith et al. 1973, Horie et al. 2006). It is, however, difficult to realize the long-term and continuous monitoring of $g_c$ due to the occurrence of the calculation error caused by the fluctuation of the environmental condition. This is partly because the model assumption is too simple to describe the meteorological and aerodynamic conditions of the crop canopy in the field condition. Here we report the novel method of the direct measurement of the aerodynamic resistance ($r_a$) of the crop canopy, which enables us the stable and continuous measurement of the gas exchange capacity of the crop plants. The modified heat balance model shows the improved performance to quantify $g_c$ under the fluctuating meteorological condition in the field. The relationship between $g_c$ and biomass production of rice and soybean varieties is also discussed in the presentation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.721-727
• /
• 2002

Precipitation evapotranspiration and runoff are three key parameters of regional water balance. Problems exist in the traditional methods for calculating such factors , such as explaining of the geographic rationality of spatial interpolating methods and lacking of enough observation stations in many important area for bad natural conditions. With the development of modern spatial info-techniques, new efficient shifts arose for traditional studies. Guided by theories on energy flow and materials exchange within Soil-Atmosphere-Plant Continuant (SPAC), retrieval models of key hydrological parameters were established in the Yellow River basin using CMS-5 and FengYun-2 meteorological satellite data. Precipitation and evapotranspiration were then estimated: (1) Estimating tile amount of solar energy that is absorbed by the ground with surface reflectivity, which is measured in the visible wavelength band (VIS): (2) Assessing the partitioning of the absorbed energy between sensible and latent heat with the surface temperature, which was measured in the thermal infrared band (TIR), the latent heat representing the evapotranspiration of water; (3) Clouds are identified and cloud top levels are classified using both VIS and TIR data. Hereafter precipitation will be calculated pixel by pixel with retrieval model. Daily results are first obtained, which are then processed to decade, monthly and yearly products. Precipitation model has been has been and tested with ground truth data; meanwhile, the evapotranspiration result has been verified with Large Aperture Scintillometry (LAS) presented by Wageningen University of the Netherlands. Further studies may concentrate on the application of models, i.e., establish a hydrological model of the Yellow river basin to make the accurate estimation of river volume and even monitor the whole hydrological progress.

• 한국토양환경학회지
• /
• 제4권2호
• /
• pp.137-147
• /
• 1999

Cahn-balance에 의한 TGA(thermal gravimetric analysis)와 heat pipe가 내삽된 유동상 탈착 시스템을 이용한 실험 및 이론적 고찰을 통해 유동상 열탈착조에서 디젤오염토양의 열탈착 모델링을 확립하였다. 유류에 오염된 토양의 탈착 특성을 살펴본 결과, 비다공성(nonporous)토양("soil A")의 경우 유류 탈착 빠르게 진행되는데 반해서 다공성(porous)토양("soil B")의 경우 탈착이 지연되는 현상을 관측하였는데 이는 내부 기공에서 탈착된 유류성분이 외부로 빠져 나오는데 걸리는 시간이 비다공성 토양에 비해 상대적으로 길기 때문으로 사료된다. 또한, 확산지배 탈착 영역에서는 탈착속도는 탈착가스의 유속과는 거의 상관없는 경향을 보였다. 연속식 유동상에서의 탈착효율에 영향을 미치는 변수는 탈착조 온도, 유속, 토양 공급량 이였다. 모든 온도 범위 내에서, 유동화속도가 클수록 잔류오일의 양이 감소하는, 즉 탈착효율이 증가하는 경향을 보였다. 특히 낮은 탈착온도 일수록 유동화 유속의 증가에 따라 뚜렷한 탈착효율의 증가효과를 관측할 수 있었다. 반면에 일정한 유속 하에서 토양공급 속도의 증가에 따라 탈착 효율은 감소하였다. 공급속도가 높을 때에는 온도와는 상관없이 잔류오염물의 농도가 대체적으로 높았는데, 이는 screw feeder를 통해 유입되는 오염토양이 충분한 체류시간을 거치지 않고 빠져나감으로써 충분한 열적 교환 및 물질이동이 이루어지지 않았음을 나타내주고 있다. 본 연구에서는 Fickian 확산계수를 결합시킨 Kunii-Levenspiel 모델을 통하여 유동화 속도에 따른 오염토양의 탈착 경향을 살퍼본 결과 탈착 효율 $A_X$는 전체 물질전달계수 (${K_d}_f$)와 유체유속과 기포상 승속도의 비($u_o$$u_b$)의 변화에 크게 영향을 받는 것으로 나타났다. 모델링의 예측 결과로부터 유동층내의 확산 지배에 의한 오염토양의 탈착효율은 여러 조업변수의 조합에 의해 최적화 할 수 있음을 알 수 있었고, 아주 낮은 최소 유동화속도에서도 높은 탈착효율을 얻을 수 있다는 사실을 확인하였다. 얻을 수 있다는 사실을 확인하였다.