• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2013

Acacia mangium is an evergreen fast-growing tropical tree, which can grow up to 30 m tall and 50 cm thick, under favorable conditions. It is a low-elevation species associated with rain forest margins and disturbed, well-drained acid soils. It is native to Papua, Western Irian Jaya and the Maluku islands in Indonesia, Papua New Guinea and north-eastern Queensland in Australia. Due to its rapid growth and tolerance of very poor soils, A. mangium was introduced into some Asian, African and western hemisphere countries where it is used as a plantation tree. A. mangium has good quality wood traits, such as a comparatively low proportion of parenchymatous cells and vessels, white and hard wood, and high calorific value. Therefore, it is useful for a variety of purposes, such as furniture, cabinets, turnery, floors, particleboard, plywood, veneer, fence posts, firewood, and charcoal. It is also being used in pulp and paper making because it has good pulp traits, with high yields of pulp, quality of kraft, and produces paper with good optical, physical and surface properties. Because there are significant provenance differences in growth rate, stem straightness, heartwood formation and frequency of multiple leaders, the productivity and quality also varies depending upon environmental conditions, so genetic improvement programmes have been undertaken in countries like Australia, India, Indonesia, Malaysia, the Philippines, Taiwan and Thailand. The programme includes provenance identifications and testing, plus tree selection and clonal multiplication, establishment of seed orchards and hybridization. The phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting, wood properties and utilization have been discussed in this paper.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.79-88
• /
• 2005

This research studied the utilization of the bed log wastes as a papermaking grade pulp. Five different bed log samples from shiitake mushroom (Lentinus edodes (Berk.) Sing) cultivation were collected by the cultivating periods of 1 to 5 years. The wood chemical composition and the characteristics of kraft pulping of each sample were investigated. The results of chemical composition showed that the rate of carbohydrate (glucose and xylose) content in sapwood was decreased as the cultivation period was increased. In heartwood, there was no significant difference. The screening yield of non-cultivated bed log from kraft pulping was higher than that of cultivated one, but the reject of cultivated one, especially for 5 year-cultivated, was lower than non-cultivated bed log. The fiber length and width was continuously decreased as the cultivation period was increased. Therefore, the freeness of the pulp from the cultivated bed log was sharply decreased comparing to non-cultivated due to the fiber cutting and the increased fine content. The dry strengths were increased according to the increasing addition level of bed log kraft pulp to KOCC and non-cultivated wood pulp. From the overall results, the pulp from 5 years cultivated bed log can be reasonably used if it is mixed with long fiber pulp for advantages such as reducing beating time.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.101-105
• /
• 2009

Alcohol oxidation activities and optimization of extraction conditions of Rrhus verniciflua Stokes (RVS) extract were evaluated for the development of a functional biomaterial for improving liver function. When alcohol oxidation activities of RVS was analyzed, the Rrhus verniciflua Stokes bark (RVSB) were higher than the Rrhus verniciflua Stokes heartwood (RVSH). Alcohol oxidation activity value of RVSB increased in a concentration-dependent manner. In the comparative analysis between Hovenia dulcis Thunb (HOT) and Alnus japonica Steud (AJS) which was reported as a alcohol oxidation material, alcohol oxidation activity is much higher than the others. The experimental conditions were optimized for alcohol oxidation-active components production from RVSB. The extraction conditions such as temperature, time, pH and particle size were performed. It was recommended to extract the alcohol oxidation-active components from RVSB by hot water (pH 7.0) at $85^{\circ}C$ for 8 hours.

• Korean Journal of Pharmacognosy
• /
• v.33 no.2 s.129
• /
• pp.130-136
• /
• 2002

Melanogenesis is a physiological process resulting in the synthesis of melanin pigments, which play a crucial protective role against skin photocarcinogenesis. The heart wood of Caesalpinia sappan L.(C. sappan) has long been commonly used in Oriental folk medicines to promote blood circulation, and as an emmenagogue, analgesic or anti-inflammatory agent as well as a remedy for thrombosis. From the heartwood, many constituents have been purified and among them, brazilin and hematoxylin are two of the most abundant. This present study was designed to investigate the inhibitory effect of butanol extract from C. sappan on proliferation and melanogenesis in Melan-a cells. After 48 h treatment of these cells with various concentrations of butanol extract, the cells showed a dose-dependent inhibition in their proliferation without apoptotic cell death. Therefore, the growth retardation by the extract may be due to the cell arrest or cell differentiation. We also estimated total melanin content as a final product and activity of tyrosinase, a key enzyme, of melanogenesis in Melan-a cells. The melanin content and tyrosinase activity were deσeased in extract-treated cells in a dose dependent manner compared to control group. The butanol extract also resulted in a decrease of melanin content in ${\alpha}-melanocyte-stimulating$ hormone (MSH)-induced melanogenesis, indicating that butanol extract of C. sappan could be developed as skin whitening components of cosmetics.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.521-530
• /
• 2011

Nowadays, market demand of structural Glulam is growing and diversifying. The durability of Glulam should be significantly considered when they are intended to apply for out-door use such as timber bridge and pergola. This study was aimed to develop the manufacturing process of preservative treated structural Glulam using domestic softwood species. 10 m long structural Glulam were manufactured from domestic pitch pine logs with CuAz-3 preservative treatment. At each manufacturing process, the production yield was evaluated. Finally, bending tests were performed to verify the structural performance of manufactured Glulam. From the results, it was shown that the preservative treatment process hardly influenced on the production yield. But domestic pitch pine was proved to not be suitable for making the preservative treated Glulam due to the large difference of preservative permeability between sapwood and heartwood.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.784-791
• /
• 2015

Polyethylene glycol (PEG) impregnation prevents a red pine disk from cross-sectional checking during drying. Percentage of PEG Retention (PPR) was measured by the experimental methods of aceton extraction and moisture conditioning in a saturated salt solution and the effect of acetylation on PEG impregnated wood was investigated. PPRs of the kiln-dried specimens were much higher than those of the air-dried by at least four times and within the kiln-dried specimens those of the sapwood were higher that those of the heartwood by two times. These results were confirmed by the moisture conditioning experiment. Acetylation increased the weights of the kiln-dried specimens much less than those of the air-dried. It was revealed that acetic anhydride solution eluted PEG-1000 in the specimens. It is concluded that kiln-drying is more effective than air-drying for the increase of PPR and that acetylation eliminates the difference between the kiln- and air-dried specimens.

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.597-602
• /
• 2010

In this study, pigs [n=117; (Landrace ${\times}$ Yorkshire) ${\times}$ Duroc; $64{\pm}0.5$ Kg initial body weight] were used to investigate the effect of feeding different levels of lacquer (Rhus verniciflua Stokes) meal on performance, carcass traits and quality of meat kept under refrigeration at $3{\pm}1^{\circ}C$. The pigs were randomly allotted to 3 treatments on the basis of body weight and sex and each treatment was replicated 3 times (13 pigs in each replicate). Lacquer meal in sawdust form obtained from the stem bark and heartwood of sun-dried lacquer trees was added to the grower and finisher diets at 0, 20 and 40 g/kg diet. The experimental diets were fed for 8 wk. Inclusion of lacquer meal had no influence (p>0.05) on growth performance of pigs. Improvement in carcass traits and decreased back fat thickness were noticed in pigs fed diets added with 20 and 40 g/kg lacquer meal. Longissimus muscle obtained from pigs fed lacquer meal had higher moisture and lower fat content, thiobarbituric acid reactive substances and water holding capacity. Meat from lacquer fed pigs was also darker and redder. The data indicates that lacquer meal can be incorporated up to 40 g/kg in the diet of fattening pigs without affecting growth performance. Also, lacquer meal increases carcass lean content and improves the oxidative stability of the meat.

• Journal of Forest and Environmental Science
• /
• v.25 no.1
• /
• pp.1-24
• /
• 2009

Teak (Tectona grandis) is one of the most valuable timber yielding species in the world, with predominant distribution in tropical or sub-tropical countries. However, natural teak available only in few countries like India, Myanmar, Laos People's Democratic Republic and Thailand. Teak grows well in deep, well-drained alluvial soils, fairly moist, warm, tropical climate with pH ranges from 6.5-7.5. Teak is cultivated in many Asian, African and South American countries for timber production. The global teak plantations are estimated to be three million hectare with major share in India (44%) followed by Indonesia (33%). India is considered as richest genetic resources of teak with large areas of natural teak bearing forests (8.9 million ha), plantations (1.5 million ha), clonal seed orchards (1000 ha) and seed production areas (5000 ha). The studies on diversity of teak populations showed that teak is an out crossing species with major portion of diversity present within the populations. The productivity and quality of teak timber varies depending upon the site and environmental conditions. Teak wood is moderately heavy, strong and tough,straight grained, coarse textured and ring porous with specific gravity varies from 0.55 to 0.70. The sapwood is white to pale yellow in colour and clearly demarcated while heartwood is dark brown or dark golden yellow in colour. Teak is one of the most durable timbers in the world, practically, impervious to fungus and white ant attack and resistant to decay. Teak wood is used in ship and boat constructions, furnitures and aesthetic needs. Genetic improvement programmes have been undertaken in countries like Thailand, India, Malaysia and Indonesia. The programme includes provenance identification and testing, plus tree selection and clonal multiplication, establishment of seed orchards and controlled hybridization. Several aspects like phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting and marketing, wood properties and future tree improvement strategy to enhance productivity have been discussed in this paper.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.60-67
• /
• 1984

This study was identified 6 species of the genus Acer in Korea by the method of thin layer chromatography on lipids in heart wood, and researched affinity among the species for the characteristics of color reaction. The results were summarized as follows; 1) Total-lipid in heart wood of the six species was 4.39%, mean free-lipid was 2.85% and mean bound-lipid was 1.54%. 2) All the six species; A. ginnala, A. mono, A. negundo, A. palmatum, A. saccharinum and A, triflorum were identified by the characteristics of color reaction. Judging from the color reactions, A. palmatum and A. triflorum seem to be closer than other species.

• Natural Product Sciences
• /
• v.19 no.1
• /
• pp.54-60
• /
• 2013

Rhus verniciflua Stokes (Anacadiaceae) is a plant that is native to East Asian countries, such as Korea, China, and Japan, and it has been found to exert various biological activities including antioxidative, anti-aggregatory, anti-inflammatory, anti-mutagenic, and apoptotic effects. Sulfuretin is one of the major flavonoid component isolated from the heartwood of R. verniciflua. Reactive oxygen species (ROS), produced via dental adhesive bleaching agents and pulpal disease, can cause oxidative stress. In the present study, we isolated sulfuretin from R. verniciflua and demonstrated that sulfuretin possesses cytoprotective effects against hydrogen peroxide ($H_2O_2$)-induced dental cell death. $H_2O_2$ is a representative ROS and causes cell death through necrosis in human dental pulp (HDP) cells. $H_2O_2$-induced cytotoxicity and production of ROS were blocked in the presence of sulfuretin, and these effects were dose dependent. Sulfuretin also increased heme oxygenase-1 (HO-1) protein expression. In addition, to determine whether sulfuretin-induced HO-1 expression mediated this cytoprotective effect, HDP cells were cotreated with sulfuretin in the absence or presence of SnPP, an inhibitor of HO activity. Sulfuretin-dependent HO-1 expression was required for suppression of $H_2O_2$-induced HDP cell death and ROS generation. These results indicate that sulfuretin-dependent HO-1 expression was required for the inhibition of $H_2O_2$-induced cell death and ROS generation. In addition, sulfuretin may be used to prevent functional dental cell death and thus may be useful as a pulpal disease agent.