• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2015

Objective : The purpose of this study was to determine the differences in the head and tibial acceleration signal magnitudes, and their powers and shock attenuations between flat-footed and normal-footed running. Methods : Ten flat-footed and ten normal-footed subjects ran barefoot on a treadmill with a force plate at 3.22m/s averaged from their preferred running speed using heel-toe running pattern while the head and tibial acceleration in the vertical axis data was collected. The accelerometers were sampled at 2000 Hz and voltage was set at 100 mv, respectively. The peak magnitudes of the head and tibial acceleration signals in time domain were calculated. The power spectral density(PSD) of each signal in the frequency domain was also calculated. In addition to that, shock attenuation was calculated by a transfer function of the head PSD relative to the tibia PSD. A one-way analysis of variance was used to determine the difference in time and frequency domain acceleration variables between the flat-footed and normal-footed groups running. Results : Peaks of the head and tibial acceleration signals were significantly greater during flat-footed group running than normal-footed group running(p<.05). PSDs of the tibial acceleration signal in the lower and higher frequency range were significantly greater during flat-footed running(p<.05), but PSDs of the head acceleration signal were not statistically different between the two groups. Flat-footed group running resulted in significantly greater shock attenuation for the higher frequency ranges compared with normal-footed group running(p<.05). Conclusion : The difference in impact shock magnitude and frequency content between flat-footed and normal-footed group during running suggested that the body had different ability to control impact shock from acceleration. It might be conjectured that flat-footed running was more vulnerable to potential injury than normal-footed running from an impact shock point of view.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.269-282
• /
• 2009

This paper presents a novel approach for Lamb wave based structural health monitoring(SHM) in honeycomb aluminum panels. In this study, a suite of three signal processing algorithms are employed to improve the damage detection capability. The signal processing algorithms used include wavelet attenuation, correlation coefficients of power density spectra, and triangulation of reflected waves. Piezoelectric transducers are utilized as both sensors and actuators for Lamb wave propagation. These SHM algorithms are built into a MatLab interface that integrates and automates the hardware and software operations and displays the results for each algorithm to the analyst for side by side comparison. The effectiveness of each of these signal processing algorithms for SHM in honeycomb aluminum panels under a variety of damage conditions is then demonstrated.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.148-151
• /
• 2009

In these days it is important to secure the life and stability of the structure such as aircrafts, automobiles and building. So the structural health monitoring is needed. In conventional lamb wave techniques, damage is identified by comparing the measured data (baseline signals) and the current data. But this method can lead to high false signal in the intact condition of the structure due to environmental conditions of the structure. As a solution to resolve it, the structural health monitoring method which doesn't use baseline signals is necessary. Damaged structure has unusual elastic wave. This paper proposed a PC(pitch-catch) method which doesn't use baseline signal. New baseline signals can get from detection signal. Damage signals based on new baseline signals. This paper made an image includes damage information by applying damage-signals to beamformming.

• Smart Structures and Systems
• /
• v.1 no.2
• /
• pp.121-140
• /
• 2005

This paper presents a systematic investigation of the effect of sensor location on the data quality and subsequently, on the effectiveness of machine health monitoring. Based on an analysis of the signal propagation process from the defect location to the sensor, numerical simulations using finite element modeling were conducted on a bearing test bed to determine the signal strength at several representative sensor locations. The results showed that placing sensors closely to the machine component being monitored is critical to achieving high signal-to-noise ratio, thus improving the data quality. Using millimeter-sized piezoceramic plates, the obtained results were evaluated experimentally. A comparison with a set of commercial vibration sensors verified the developed structural dynamics-based sensor placement strategy. It further demonstrated that the proposed shock wave-based sensing technique provided an effective alternative to vibration measurement, while requiring less space for sensor installation.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.81-84
• /
• 2001

This paper presents a potable bio-signal measurement system using Bluetooth for the 24-hours continuous health state monitoring of the elderly and the disabled. The measurement system has the functions of acquisition of various bio-signals, wireless data transmission and adjustment of parameters such as gain and cut-off frequency. This measurement system is designed according to the international specifications of the recommendation of AAMI (Association for the Advancement of Medical Instrumentation). The design targets of the developing system about volume and power consumption are 20x30x5mm$^3$ and 8mW.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.67-71
• /
• 2007

Recently, a health care need according to the increase of an advanced age population is increasing. The requirement about a health care monitoring is increasing rapidly from general people as well as patient. The requisition about a medical treatment technique and a medical treatment information service is the trend to be expanding. That can be possible minimizing the inconvenience of the patient to take a medical service and continuously monitoring the status of the patient to take a health care service. This paper discusses an implementation of wireless physiological signal monitoring system for health care. The system are composed of the sensor node and monitoring program. The sensor node has the physiological signal measurement part and the wireless communication part. The remote monitoring system has a monitoring program that are communicating the sensor node using bluetooth. The sensor node measured the ECG, pulse wave, blood pressure, Sp02, and heart rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1401-1407
• /
• 2008

Recently, a health care need according to the increase of an advanced age population is increasing. The requirement about a health care monitoring is increasing rapidly from general people as well as patient. The requisition about a medical treatment technique and a medical treatment information service is the trend to be expanding. That can be possible minimizing the inconvenience of the patient to take a medical service and continuously monitoring the status of the patient to take a health care service. This paper discusses an implementation of wireless physiological signal monitoring system for health care. The system are composed of the sensor node and monitoring program. The sensor node has the physiological signal measurement part and the wireless communication part. The remote monitoring system has a monitoring program that are communicating the sensor node using bluetooth. The sensor node measured the ECG, pulse wave, blood pressure, SpO2, and heart rate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.987-991
• /
• 2011

In this paper, a health care system is implemented which can identify the parameter for moving body after exercising based on home network. This system has catched a signal for physical condition of body data using data acquisition mechanism such as a data acquisition module, a data signal processing module and a feedback module. The composition has a functions of displacement point for a BMI and WDI, that the basic parameter measure to base on the heart rate, temperature. There are checked physical condition of body exercising to compounded a physical condition of sensory organ. There are to keep the lookout for the body condition that to estimate a health care with a physical organ through a exercise.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.817-818
• /
• 2006

In Magnetic Resonance Imaging(MRI), the QRS complex of ECG is used as a trigger signal for MRI scan. But, gradient and RF(radio frequency) artifacts which are caused to static and dynamic field in MRI scanner cause interference in the ECG. Also, the signal shape of theses artifacts can be similar to the QRS-complex, causing possible misinterpretation during patient monitoring and false gating of the MRI. In case of using general FIR or IIR band-pass filters for minimizing the artifacts, artifact-reduction-ratio is not excellent. So, an adaptive real-time digital filter is proposed for reduction of noise by gradient and RF(radio frequency) artifacts. The proposed filter for MRI-Gating is based on the noise-canceller with NLMS(Normalized Least Mean Square) algorithm. The reference signals of the adaptive noise canceller are a combination of the noisy three channel ECG signals. In conclusions, the proposed method showed the acceptable quality of ECG signal with sufficient SNR for gating the MRI and possibility of real time implementation.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.2
• /
• pp.165-176
• /
• 2020

Customized medical care and services timely providing effective prevention and treatment by collecting and using individuals' biomedical data are recently possible and utilized for users' health care. They are developed as the real-time health care services and information is provided to individuals by using smart phones, PC, tablet, etc. Interactive communication is supported by informing managers of analysis data and results, through collected data. It is therefore the time for constructing health care. This study attempts to prepare for patent applications of technical development at this time, by analyzing the tendency of smart wearable health care technologies, including biological signal-based health care devices and real-time health care system. Patents regarding smart wearable health care technologies were reported to have the relatively higher concentration of research development. Korea focuses on patent activities for real-time health care systems across the intervals of analysis, while U.S and European countries actively make efforts for patent activities regarding health care devices Japan conduct patent activities across health care devices and systems, based on bio-technologies. Korea has recently dominated the market of patents for bio-technologies-based health care devices and real-time health care devices and also appears to secure patents for the technologies and the market, so entry barriers to the market of smart wearable health care technologies are determined to be higher in Korea. It is important to establish the portfolios of patents, by securing patent rights for the figures of products, manufacturing methods and other related technical systems, if technologies are planned to be commercialized.