• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 춘계학술대회 논문집
• /
• pp.202-205
• /
• 2006

The objective of this study is to analyze the hazard-areas for landslide using GIS and RS. LRA (Logistic Regression Analysis) and AHP (Analytic Hierarchy Program) methods were used for evaluation of the hazard-areas by six topographic factors (slope, aspect, elevation, soil drain, soil depth, land use). These methods were applied to Anseong-si where frequent landslides were occurred mainly by the regional heavy rainfall. A landslide hazard-map of Anseong-si could describe into 7 hazard-grades. As results, LRA method was underestimated in higher grades areas, while AHP method was underestimated in lower grades areas. In order to evaluate the hazard-areas for landslides with accuracy, these results of each method were overlapped and the results of suggested method were compared with the historical landslide hazard records of KFRI (Korea Forest Research Institute).

• Wind and Structures
• /
• 제15권2호
• /
• pp.131-145
• /
• 2012

Severe wind is one of the major natural hazards in Australia. The component contributors to economic loss in Australia with regards to severe wind are tropical cyclones, thunderstorms and subtropical (synoptic) storms. Geoscience Australia's Risk and Impact Analysis Group (RIAG) is developing mathematical models to study a number of natural hazards including wind hazard. This paper discusses wind hazard under current and future climate conditions using RIAG's synoptic wind hazard model. This model can be used in non-cyclonic regions of Australia (Region A in the Australian-New Zealand Wind Loading Standard; AS/NZS 1170.2:2011) where the wind hazard is dominated by synoptic and thunderstorm gust winds.

• 한국재난정보학회 논문집
• /
• 제3권1호
• /
• pp.87-101
• /
• 2007

The definition and concept of disasters and their preparedness have been changing according to the modern situation. The basic change is that the concept of absolute standard and prevention of hardware damage in the past have been changing to the concept of relative standard and mitigation of direct damage to human. For achieving the purpose, advanced countries developed and used their own analysis method of hazard and vulnerability for disaster ; ASHE hazard and vulnerability evaluation method, hazard matrix method by CDC, FEMA model method and SMUG hazard priority method. Because each analysis method cannot evaluate the hazard and vulnerability for specific disaster, the advantages and disadvantages should be applied for specific situation of disaster in Korea and new analysis method should be extracted in the future.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.26-32
• /
• 2005

Recent earthquakes, measuring over a magnitude of 5.0, on the eastern coast of Korea, have aroused interest in earthquake analyses and the seismic design of caisson-type breakwaters. Most earthquake analysis methods, such as equivalent static analysis, response spectrum analysis, nonlinear analysis, and capacity analysis, are deterministic and have been used for seismic design and performance evaluation of coastal structures. However, deterministic methods are difficult for reflecting on one of the most important characteristics of earthquakes, i.e. the uncertainty of earthquakes. This paper presents results of probabilistic seismic hazard assessment(PSHA) of an actual caisson-type breakwater, considering uncertainties of earthquake occurrences and soil properties. First, the seismic vulnerability of a structure and the seismic hazard of the site are evaluated, using earthquake sets and a seismic hazard map; then, the seismic risk of the structure is assessed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권2호
• /
• pp.99-106
• /
• 2004

Train control system in LRT (Light Rail Transit) is developed as a part of "Light Rail Transit System Development Project". But there was no specific requirement representing the system safety. Because system safety must be ensured before the customization, we applied the system to a officially recognized specific procedure, such as "A Guideline to Ensure the Safety of Train Control System in Korea" that was officially announced by KNR (Korea National Railroad) in 2001. We should draw system safely requirement to guarantee system safety for the first time. In this paper, the hazard identification and analysis to derive the safety requirement on LRT train control system are carried out following the KNR guideline. To analyze hazard, we have to deduce system functions, identify related hazards, derive the effects of the hazards, analyze current risk, define the target risk of the system, and deduce the alternative plans to reduce the effects of the hazards. After the hazard analysis following the upper procedure, 30 hazards are identified and analysed. Especially detailed analysis on train collision that is a main hazard of the train control of system is specially carried out.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제28권4호
• /
• pp.31-39
• /
• 2022

The purpose of this study is to analyse the hazard risk by examining the magnitude and severity of each type of hazard in order to mitigate and prepare for disasters in medical facilities. Methods: The hazard risk analysis for hazard types was surveyed for team leaders of medical facilities. The questionnaire analyzed data from 27 facilities, which were returned from 41 Local Medical Centers. Results: When looking at the 'Risk' by category type of hazard, the influence of health safety and fire/energy safety comes first, followed by natural disaster, facility safety, and crime safety. On the other hand, as for 'Magnitude', facility safety and crime safety come first, followed by health safety, fire/energy safety, and natural disasters. Most of the top types of disaster judged to have high hazard in medical facilities are health types. The top five priorities of hazard in medical facilities, they are affected by the geographical and industrial conditions of the treatment area. In the case of cities, the hazard was found to be high in the order of infectious disease, patient surge, and wind and flood damage. On the other hand, in rural areas, livestock diseases and infectious diseases showed the highest hazard. In the case of forest areas, the hazard was high in the order of wildfire, fire accident, lightning, tide, earthquake, and landslide, whereas in coastal areas of industrial complexes, the hazard was high due to fire, landslide, water pollution, marine pollution, and chemical spill accident. Implications: Through the research, standards will be established for the design of hospitals with disaster preparedness, and will contribute to the preparation of preemptive measures in terms of maintenance.

• 인터넷정보학회논문지
• /
• 제20권3호
• /
• pp.1-11
• /
• 2019

자동차, 원자력, 철도, 항공 등의 분야에서 발생하는 소프트웨어의 고장이나 사고는 바로 큰 재산 피해나 인명 피해로 연결될 수 있다. 이에 체계적이고도 효과적인 안전품질 관리의 필요성이 커지고 있으며, 최근 관련 산업 분야에서는 IEC 61508을 기반으로 안전 국제 표준이 제정되어 산업에 적용되고 있다. 국제 표준에서 명시하고 있는 안전 생명주기에 따르면 소프트웨어 안전성 품질을 확보하기 위해서는 개발 초기 단계에서 위험원 및 위험 분석(Hazard and risk analysis)을 통한 안전 요구사항을 개발하도록 권고하고 있다. 본 논문에서는 소프트웨어의 안전성 요구사항의 식별 및 정의를 위해 SysML을 활용한 STPA 기반의 위험원 분석 프로세스를 제안한다. 세부적으로는 SysML의 BDD과 IBD 다이어그램을 활용하여 기존 STPA 분석에서 활용되고 있는 제어구조도를 보다 명확하게 정의할 수 있도록 개선하였고, SD 다이어그램을 활용하여 안전 제약사항(요구사항)을 상세화할 수 있도록 하였다. 제안 방법의 적용 결과, STPA에서 누락되었던 위험원을 추가적으로 식별할 수 있었고, 위험원의 발생 시나리오도 상세하게 구체화할 수 있었다.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.265-271
• /
• 2015

The tsunami hazard analysis is performed for testing the application of probabilistic tsunami hazard analysis to nuclear power plant sites in the Korean Peninsula. Tsunami hazard analysis is based on the seismic hazard analysis. Probabilistic method is adopted for considering the uncertainties caused by insufficient information of tsunamigenic fault sources. Logic tree approach is used. Uljin nuclear power plant (NPP) site is selected for this study. The tsunamigenic fault sources in the western part of Japan (East Sea) are used for this study because those are well known fault sources in the East Sea and had several records of tsunami hazards. We have performed numerical simulations of tsunami propagation for those fault sources in the previous study. Therefore we use the wave parameters obtained from the previous study. We follow the method of probabilistic tsunami hazard analysis (PTHA) suggested by the atomic energy society of Japan (AESJ). Annual exceedance probabilities for wave height level are calculated for the site by using the information about the recurrence interval, the magnitude range, the wave parameters, the truncation of lognormal distribution of wave height, and the deviation based on the difference between simulation and record. Effects of each parameters on tsunami hazard are tested by the sensitivity analysis, which shows that the recurrence interval and the deviation dominantly affects the annual exceedance probability and the wave heigh level, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• Earthquakes and Structures
• /
• 제26권3호
• /
• pp.191-201
• /
• 2024

A comprehensive probabilistic seismic hazard analysis was carried out in Istanbul to examine the seismotectonic features of the region. The results showed that earthquakes can trigger one another, resulting in the grouping of earthquakes in both time and space. The hazard analysis utilized the Poisson model and a conventional integration technique to generate the hazard curve, which shows the likelihood of ground motion surpassing specific values over a given period. Additionally, the study evaluated the impact of seismic hazard on the structural integrity of an existing masonry tower by simulating its seismic response under different ground motion intensities. The study's results emphasize the importance of considering the seismotectonic characteristics of an area when assessing seismic hazard and the structural performance of buildings in seismic-prone regions.