• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.902-912
• /
• 2016

Recent advances in energy harvesting (EH) technology have motivated the adoption of rechargeable mobile devices for communications. In this paper, we consider a point-to-point (P2P) wireless communication system in which an EH transmitter with a non-ideal rechargeable battery is required to send a given fixed number of bits to the receiver before they expire according to a preset delay constraint. Due to the possible energy loss in the storage process, the harvest-use-and-store (HUS) architecture is adopted. We characterize the properties of the optimal solutions, for additive white Gaussian channels (AWGNs) and then block-fading channels, that maximize the energy efficiency (i.e., battery residual) subject to a given rate requirement. Interestingly, it is shown that the optimal solution has a water-filling interpretation with double thresholds and that both thresholds are monotonic. Based on this, we investigate the optimal double-threshold based allocation policy and devise an algorithm to achieve the solution. Numerical results are provided to validate the theoretical analysis and to compare the optimal solutions with existing schemes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1286-1298
• /
• 2008

This study was attempted to examine the indigo dyeing technique in the latter Joseon Dynasty, and to find diachronic specifics in the indigo dyeing method from 17C to 19C. The results are as follows: First, There were 2 kinds of indigo species-Yoram(Polygonum tinctorium Lour.) and Sungram(Isatis tinctoria L.)-in the latter Joseon Dynasty. Dangram was preferred in particular among Yoram species because of its high dyeing efficiency. Sungram was mainly used for making Jeon(indigo sediment). Second, Yoram cultivation took the following order: Sowing in April${\rightarrow}$planting out in June${\rightarrow}$harvesting leaves in August${\rightarrow}$collecting seeds in September. Sungram had more harvesting times and wider harvesting period than Yoram. Third, all indigo dyeing methods were grouped into two categories, one was temporary dyeing method, the other was permanent dyeing method. Mixture dyeing of the boiled and the raw, raw leaves dyeing, and fermentation dyeing belonged to the temporary dyeing. Jeon dyeing and Gaeogi dyeing belonged to the permanent dyeing. Finally, diachronic specifics from 17C to 19C were as follows: Decline in the mixture dyeing of the boiled and the raw, development in the raw leaves dyeing, continuance of the fermentation dyeing, and naturalization of Jeon dyeing technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.485-485
• /
• 2018

Rainwater harvesting system (RWH) can provide a relief for the household and farmers especially in areas with intense water scarcity during the long lull of rainy season. However, much attention has not been given to this alternative water source in Nigeria. This paper estimates the per capita water demand for 1,950 inhabitants and rainwater potential in Ojonbodu Estate, Oyo State, Nigeria, using data from detailed questionnaires, water consumption calculator software, and 20-year rainfall data. The potential rainwater estimation was based on amount of precipitation, size of catchment and runoff coefficient. Consequently, using estimated values of $39420m^3$ and $6.5114{\times}10^7m^3$ for per capita consumption and potential rainwater respectively, the rainwater harvesting system was designed for rainwater collection, and storage. The harvested rainwater was $450, 000m^3$ with collection efficiency of 69.16 %, which exceeded the household water consumption requirement. Thus, the harvested rainwater was able to meet the estimated water demand of the Ojonbodu Estate households during the period of water scarcity.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.36-40
• /
• 2019

Energy harvesting is an advantageous technology for wireless sensor networks (WSNs) that dispenses with the need for periodic replacement of batteries. WSNs are composed of numerous sensors for the collection of data and communication; hence, they are important in the Internet of Things (IoT). However, due to low power generation and energy conversion efficiency, harvesting technologies have so far been utilized in limited applications. In this study, a piezoelectric energy harvester was modeled in a vibration environment. This harvester has an oval-shaped configuration as compared to the conventional cantilever-type piezoelectric energy harvester. An analytical model based on an equivalent circuit was developed to appraise the advantages of the oval-shaped piezoelectric energy harvester in which several structural parameters were optimized for higher output performance in given vibration environments. As a result, an oval-shaped energy harvester with an average output power of 2.58 mW at 0.5 g and 60 Hz vibration conditions was developed. These technical approaches provided an opportunity to appreciate the significance of autonomous sensor networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.561-564
• /
• 2014

In this paper a photovoltaic energy harvesting charger with battery management circuit is proposed. The proposed circuit harvests maximum power from a solar cell by employing MPPT(Maximum Power Point Tracking) control and charges an external capacitor battery with the harvested energy. The charging state of the battery is controlled according to the signals from the battery management circuit. The proposed circuit is designed in a 0.35um CMOS process technology and its functionality has been verified through extensive simulations. The maximum efficiency of the designed entire system is 84.8%, and the chip area including pads is $1350um{\times}1200um$.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.386-391
• /
• 2021

The formation of CaCO₃ in microalgal culture is investigated and applied for effective separation of microalgae. The presence of several cationic ions in the culture medium mediates the formation of 3 types of mineral precipitates depending on the concentration of mineral precursors, Ca²⁺ and CO₃^2-, amorphous nano-flakes, rhombohedral calcites, and spherical vaterites. While amorphous phased precipitates are formed for all concentrations of mineral precursor, only calcites are formed for 30 mM solutions of mineral precursor, and mixtures of calcites and vaterites are formed for 50 and 100 mM solutions of mineral precursor. The harvesting efficiency is also dependent on the concentration of the mineral precursor: from 90 % for 10 mM to 99 % for 100 mM after 60 mins' of gravitational sedimentation. The formation of nano-flakes on the surface of microalgal cells induces the flocculation of microalgae by breaking the stable dispersion. The negatively charged surface of the microalgal cell is compatible not only with nano-flake attachment but also with the growth of calcitic crystals in which microalgal cells are embedded.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.2094-2114
• /
• 2022

Due to the wide application of fifth generation communication, wireless sensor networks have become an indispensable part in our daily life. In this paper, we analyze physical layer security for two-way relay with energy harvesting (EH), where power splitter is considered at relay. And two kinds of combined methods, i.e., selection combining (SC) and maximum ratio combining (MRC) schemes, are employed at eavesdropper. What's more, the closed-form expressions for security performance are derived. For comparison purposes, this security behaviors for orthogonal multiple access (OMA) networks are also investigated. To gain deeper insights, the end-to-end throughput and approximate derivations of secrecy outage probability (SOP) under the high signal-to-noise ratio (SNR) regime are studied. Practical Monte-Carlo simulative results verify the numerical analysis and indicate that: i) The secure performance of SC scheme is superior to MRC scheme because of being applied on eavesdropper; ii) The secure behaviors can be affected by various parameters like power allocation coefficients, transmission rate, etc; iii) In the low and medium SNR region, the security and channel capacity are higher for cooperative non-orthogonal multiple access (NOMA) systems in contrast with OMA systems; iv) The systematic throughput can be improved by changing the energy conversion efficiency and power splitting factor. The purpose of this study is to provide theoretical direction and design of secure communication.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.581-594
• /
• 2024

In this study, a planar printed circuit board (PCB) coil with FR4 substrate was designed and simulated using the finite element method, and the results were analyzed in the frequency domain. This coil can be used in wireless power transfer (WPT) as a transmitter or receiver, eliminating wires. It can also be used as the receiver in radio frequency energy-harvesting (RF-EH) systems by optimizing the planar PCB coil to convert radio-wave energy into electricity, and it can be employed as an excitation (transmitter) or receiver coil in nuclear magnetic resonance (NMR) spectroscopy. This PCB coil can replace the conventional coil, yielding a reduced occupied volume, a fine-tuned design, reduced weight, and increased efficiency. Based on the calculated gain, power, and electromagnetic and electric field results, this planar PCB coil can be implemented in WPT, NMR spectroscopy, and RF-EH devices with minor changes. In applications such as NMR spectroscopy, it can be used as a transceiver planar PCB coil. In this design, at frequencies of 915 MHz and 40 MHz with 5 mm between coils, we received powers of 287.3 μW and 480 μW, respectively, which are suitable for an NMR coil or RF-EH system.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2093-2098
• /
• 2013

Density functional theory (DFT) was used to determine the ground state geometries of indigo and new design dyes (IM-Dye-1 IM-Dye-2 and IM-Dye-3). The time dependant density functional theory (TDDFT) was used to calculate the excitation energies. All the calculations were performed in both gas and solvent phase. The LUMO energies of all the dyes were above the conduction band of $TiO_2$, while the HOMOs were below the redox couple (except IM-Dye-3). The HOMO-LUMO energy gaps of new design dyes were smaller as compared to indigo. All new design dyes were strongly red shifted as compared to indigo. The improved light harvesting efficiency (LHE) and free energy change of electron injection ${\Delta}G^{inject}$ of new designed sensitizers revealed that these materials would be excellent sensitizers. The broken coplanarity between the benzene near anchoring group having LUMO and the last benzene attached to TPA unit in all new design dyes consequently would hamper the recombination reaction. This theoretical designing will the pave way for experimentalists to synthesize the efficient sensitizers for solar cells.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.189-192
• /
• 2000

The objective of this study was to investigate the effect of high content of light-absorbing pigments on overall photosynthetic efficiency in high density microalgal cultures. The light harvesting complex II (LHC II) regulating gene of Rhodobacter sphaeroides, photosynthetic purple bacterium, was removed to construct a mutant strain that had less pigment content. The mutant and wild type strains were cultured under various light intensity by adjusting the distance from the light source. The productivity of the mutant strain was higher at high light intensity (over 118 ${\mu}E/m^2/s$) compared with one of the wild type , and was lower at low light intensity (34 ${\mu}E/m^2/s$). Especially, the concentration of LHC II mutant strain was 56% higher at 118 ${\mu}E/m^2/s$. The reduction of per cell pigment contents in the mutant strain lessened the degree of the mutual shading and thus enhanced the overall photosynthetic efficiency.