• Title/Summary/Keyword: harvesting

Search Result 2,861, Processing Time 0.026 seconds

A scheme for efficient data transmission and energy harvesting in drone systems using time-power switching (Time-Power 제어를 이용한 드론의 효율적 데이터 전송 및 에너지 하비스팅 기법)

  • Hong, Seung Gwan;Cha, Gyeong Hyeon;Lee, Sun Yui;Hwang, Yu Min;Kim, Jin Young
    • Journal of Satellite, Information and Communications
    • /
    • v.10 no.4
    • /
    • pp.71-76
    • /
    • 2015
  • In this paper, we propose a system model which effectively transmits the data and conducts RF energy harvesting in a wireless communication network of LTE and 5G. Through time switching and power splitting schemes, we find a time & power ratio to show the good performance according to the standard that we set up for transmitting a signal and conducting RF energy harvesting. So selecting optimal time & power ratio, we can efficiently transfer data to other drones and harvest the amount of harvested power simultaneously we desire. Also, according to conducting the performance analysis, we can compare an ideal receiver with the proposed system model. And, we suggest a future direction of research.

Study of AC/DC Resonant Pulse Converter for Energy Harvesting (에너지 획득을 위한 AC/DC 공진형 펄스 컨버터의 연구)

  • Ngo Khai D.T.;Chung Gyo-Bum
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.10 no.3
    • /
    • pp.274-281
    • /
    • 2005
  • A new resonant pulse converter for energy harvesting is proposed. The converter transfers energy from a low-voltage AC current to a battery. The low-voltage AC current source is an equivalent of the piezoelectric generator, which converts the mechanical energy to the electric energy. The converter consists of a full-bridge rectifier having four N-type MOSFETs and a boost converter haying N-type MOSFET and P-type MOSFET instead of diode. Switching of MOSFETs utilizes the capability of the $3^{rd}$ regional operation. The operational principles and switching method for the power control of the converter are investigated with the consideration of effects of the parasitic capacitances of MOSFETs. Simulation and experiment are performed to prove the analysis of the converter operation and to show the possibility of the $\mu$W energy harvesting.

AC/DC Resonant Piezo-Powered Boost Converter for Piezoelectric Energy Harvesting (압전에너지 수확을 위한 AC/DC 공진형 자려 부스트 컨버터)

  • Kim, Hyeok-Jin;Chung, Gyo-Bum
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.14 no.6
    • /
    • pp.488-495
    • /
    • 2009
  • This paper proposes a new AC/DC RPPB(Resonant Piezo-Powered Boost) converter for energy harvesting using a piezoelectric device which converts mechanical vibration energy to electrical energy. The AC/DC RPPB converter can operate with only the harvested energy without an additional power conversion circuit for switching circuit and transfer energy to a load of which the voltage is higher than piezoelectric voltage. With the review of published topologies of the converter for energy harvesting, the operation principle of the AC/DC RPPB converter, and the results of PSPICE simulation and experiment are presented to prove the feasibility of the new converter for the energy harvesting.

Productivity and Cost of Tree-length Harvesting Using Cable Yarding System in a Larch (Larix leptolepis) Clear-cutting Stand

  • Jeong, Eungjin;Cho, Koohyun;Cho, Minjae;Choi, Byoungkoo;Cha, Dusong
    • Journal of Forest and Environmental Science
    • /
    • v.33 no.2
    • /
    • pp.147-153
    • /
    • 2017
  • The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

Rainwater Harvesting Potential in a New Residential Area in North Bujumbura, Burundi

  • Kheria, Mfuranzima;Kang, Daeseok;Sung, Kijune
    • Journal of Environmental Science International
    • /
    • v.25 no.3
    • /
    • pp.447-456
    • /
    • 2016
  • Access to clean and affordable water is one of the fundamental human rights because water is essential to life and a foundation for socioeconomic development of any country in the world. Despite the efforts to secure water supply in Burundi, the amount of water supplied by public utilities does not meet the demand of the population because population keeps increasing with fluctuation of weather conditions. This study selected north Bujumbura that is a sprawling new residential area in the western part of Burundi as a case to investigate the potential of rainwater harvesting in meeting water demand of the country. Based on a long-term average monthly precipitation in the region, the rainwater harvesting potential was assessed as a function of roof sizes, number of households, and runoff coefficients of roof materials. For the entire region of north Bujumbura, the current water supply capacity of the local water company combined with the rainwater harvesting potential resulted in the water surplus of $468,604.1m^3/yr$. Although three communes among them still showed water deficit in dry season, they still got help from rainwater to relieve their water shortage. This suggests that at the regional scale, proper storages and water quality control for harvestable rainwater could contribute to relieving the regional water shortage and allow the population growth.

Changes in Chemical Composition of Panax ginseng Leaves by Different Harvesting Months (인삼협의 채엽시기별 화학성분에 관한 연구)

  • 정현기
    • The Korean Journal of Food And Nutrition
    • /
    • v.13 no.1
    • /
    • pp.6-12
    • /
    • 2000
  • This study was performed to investigate the changes in chemical composition of Panax ginseng leaf by harvesting at July, August and September. The levels of crude protein of dried ginseng leaf were decreased from 17.12mg% to 14.26% by harvesting month, however, crude fat contents of dried ginseng leaf were increased slightly from 1.90% to 2.49%. Three kinds of free sugar, i.e. glucose, fructose and sucrose were found in dried ginseng leaf and maltose was not found. Free sugar contents were increased by delaying harvest, but free amino acid were decreased. Total free amino acid was decreased in delayed harvesting month, serine was revealed superior in free amino acid composition, and valine was revealed next order. In minerals, contents of Ca were from 1,306.1mg% to 1,923mg%, that of K were higher than others patricualy as 1,266.9∼1,216.0mg%. The contents of minerals were existence in order of Mg, P, Na, Fe, Mn, Zn and Cu, abundantly. Total vitamin C were present of 391.0∼336.1mg%, and the contents were decreased as delayed as harvesting period despite of the plentiful content. In fatty acid composition of ginseng leaf, the palmitic acid content was as 40% higher than other fatty acids, remarkably.

  • PDF

A RF Energy Harvesting Based Routing Protocol in Mobile Ad-hoc Wireless Sensor Networks (모바일 애드혹 무선 센서 네트워크에서 RF 에너지 하베스팅 기반 라우팅 프로토콜)

  • Shim, KyuHyun;An, Beongku
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.53 no.4
    • /
    • pp.87-93
    • /
    • 2016
  • In this paper, we propose a RF energy harvesting based routing protocol in mobile ad-hoc wireless sensor networks. The main features and contributions of the proposed routing protocol are as follows. First, establishment of routing route based on both remaining energy of mobile sensor nodes and RF energy harvesting. Second, establishment of routing route by considering availability and stability of route based on energy of mobile sensor nodes to increase lifetime of networks and route. The performance evaluation of the proposed routing protocol using OPNET shows that the routing method considering both route availability and route stability based on RF energy harvesting can increase efficiently route lifetime.

A Study on the Application Method in Korea of Energy Harvesting Technology - Focused on the Case Study of Interseasonal Heat Transfer System - (에너지 하베스팅 기술의 국내 건축물 적용 방안에 관한 기초 연구 - Interseasonal Heat Transfer System 적용 사례 중심으로 -)

  • Jo, Byungwan;Lee, Yunsung;Yoon, Kwangwon;Kim, Dogeun
    • International Journal of Highway Engineering
    • /
    • v.16 no.4
    • /
    • pp.51-62
    • /
    • 2014
  • PURPOSES: This research is a basic study for application method in korea of energy harvesting technology, and it is a research to find out the direction of architectural planning through analyzing cases of interseasonal heat transfer system applied buildings. METHODS : In this paper authors investigate application necessity of energy harvesting technology, we analyzed energy use status of building section through analyzing domestic energy consumption status and analyzed domestic renewable energy generation potential. Also we study the features of energy harvesting technology, interseasonal heat transfer system, and case study on interseasonal heat transfer system applied buildings. RESULTS : On the basis of case study on interseasonal heat transfer system applied buildings, we analyzed feasibility study and classified into four sections(economic, environment, design, applicability), and suggested directions of architectural planning. CONCLUSIONS: Economic renewable energy for public and commercial buildings(hospitals, offices, schools, factories) can be provided effectively using Interseasonal Heat Transfer.

A Feasibility Study on the Energy Harvesting Technology for the Real-Time Monitoring System of Intelligent Railroad Vehicles (철도차량 모니터링 시스템 개발을 위한 자가발전 기술 연구)

  • Kim, Jae-Hoon;Lee, Jae-Youn
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.9
    • /
    • pp.955-960
    • /
    • 2011
  • This study was aimed at investigating the applicability of energy harvesting technologies, which are regarded as new and renewable energy sources for real-time/wireless monitoring of intelligent railroad vehicles. The surrounding energy generated in a normal operating environment was monitored using a high-speed railroad vehicle in operation. This monitoring was performed in an attempt to evaluate the effectives of energy harvesting and the applicability of energy-harvesting-monitoring technologies under the conditions in which thermal energy and vibration energy are generated.

A Study on AC/DC Power Converter of Energy Harvesting for Considered to Solar Position Tracking Control (태양광 위치 추적 제어를 고려한 에너지 Harvesting AC/DC 전력 변환기 구동에 관한 연구)

  • Na, Seung-Kwon;Ku, Gi-Jun
    • Journal of Advanced Navigation Technology
    • /
    • v.18 no.1
    • /
    • pp.56-66
    • /
    • 2014
  • In this paper, the solar cell need the characteristic interpreting because the solar cell changes greatly according to the isolation, temperature and load in the photovoltaic development. Moreover, to get many energy in photovoltaic development need the position tracking of the sun according to the environment change and it is necessary to control the output of solar cells up to the time. Simulation and composed microprocessor and sensor chip an power conversion system with boost converter to experiment results are performed to prove the analysis of the converter operation, and to show the possibility of energy harvesting and photovoltaic development need the position tracking small capacitance, the boost rate of boost converter was similar to 167 percent.