• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.84-91
• /
• 2008

"Eco-friendly construction" is an emerging issue in the building industry. Main purpose of the eco-friendly construction is to sustain the health and environment of building residents and to minimize the harmful effect on their environment. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Environmental performance is to meet through using the highest grade eco-friendly materials. However, generally eco-friendly materials are more expensive than normal materials, Therefore, using eco-friendly materials at public housing project is limited to economical aspect. The purpose of this paper is development of eco-friendly material selection model considered cost efficiency. The selection of Eco-friendly finishing materials and their methods are constructed to consider environmental performance level and cost index compositively. Development of eco-friendly material selection method is economic and reasonable one when public housing is constructed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.953-956
• /
• 2007

"Eco-friendly construction"is an emerging issue in the building industry. Main purpose of the eco-friendly construction is to sustain the health and environment of building residents and to minimize the harmful effect on their environment. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Environmental performance is to meet through using the highest grade eco-friendly materials. However, generally eco-friendly materials are more expensive than normal materials. Therefore using eco-friendly materials at public housing project is limited to economical aspect. The purpose of this paper is development of eco-friendly material selection model considered cost efficiency. The selection of Eco-friendly finishing materials and their methods are constructed to consider environmental performance level and cost index compositively. Development of eco-friendly material selection method is economic and reasonable one when public housing is constructed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3319-3326
• /
• 2014

Eosin yellow is used a dye and colorant but it is harmful toxic substance. In this paper, batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for eosin yellow adsorption by activated carbon with varying the operating variables like pH, initial concentration, contact time. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. By estimated Langmuir constant value, $R_L$=0.067-0.083, and Freundlich constant value, $\frac{1}{n}=0.237-0.267$, this process could be employed as effective treatment for removal of eosin yellow. From calculated Temkin constant, value, B=1.868-2.855 J/mol, and Dubinin-Radushkevich constant, value, E=5.345-5.735 kJ/mol, this adsorption process is physical adsorption. From kinetic experiments, the adsorption process were found to confirm to the pseudo second order model with good correlation coefficient($r^2$=0.995-0.998). The mechanism of the adsorption process was determined two step like as boundary and intraparticle diffusion.

• The Research Journal of the Costume Culture
• /
• v.27 no.5
• /
• pp.415-432
• /
• 2019

The purpose of the present study was to generate a list of business ethics components according to business area for small and medium-sized fashion companies. Based on the literature review, 21 components of business ethics components were identified within five business areas. Ten CEOs(Chief Executive Officers) each participated in an in-depth interview, sharing ethical and unethical cases from their own businesses. Constant comparative analysis was used to generate important business ethics components from those cases. In results, important business ethics components for each business area are: 1) using human-friendly materials, strengthening sustainable technologies, using vegan materials, concerning safe process, and reducing waste in the material production and sourcing area, 2) enhancing an efficiency in design, developing recycle/reuse designs, avoiding to copy designs, and using messages for public interest in the product design area, 3) concerning fair-trade, reducing harmful substance, saving energy, and using ethical supply channels in the distribution and logistics area, 4) acquiring certifications, promoting consumer protection, avoiding exaggerative/false advertisements, and promoting social contributions in the management and marketing area, and 5) promoting workers' rights, complying with the law, and investing on employee educations in the labor management area. All of the ethical and unethical cases of the ten companies have involved aspects of the 21 components, thereby enhancing understandings on how each issue is being seriously considered and/or handled in the small and medium-sized fashion companies. Study findings may provide a basis for development of a research model for quantitative studies and/or educational programs related to business ethics in the fashion industry.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.281-288
• /
• 2020

BACKGROUND: Generally, ammonia occurs from agricultural waste disposal. Ammonia is known as a harmful substance to the human body and has a bad influence such as eutrophication on the ecosystem. It is possible to remove the ammonia by ammonia adsorption method using natural zeolite, without external influence. However, due to the natural zeolite shape, it is hard to reuse. METHODS AND RESULTS: Electrospinning method can produce fiber with constant diameter. Moreover, electrospinning method has no limitation for selecting the material to make the fiber, and thus, it is valuable to reform the surface of adsorbent. In this study, reusable membrane was made by electrospinning method. The highest removal efficiency was shown from the membrane with 20% of zeolite included, and it has been verified that it is possible to reuse the membrane through chemical treatment. The highest ammonia removal efficiency was about 92.4%. CONCLUSION: In this study, ammonia adsorption characteristics of zeolite fibers were studied. Electrospinning method can produce zeolite fiber with even distribution. Ammonia can be removed efficiently from ion exchange ability of the natural zeolite. The result of adsorption isotherm indicated that both Freundlich model and Langmuir model provided the best fit for equilibrium data. And study on desorption has demonstrated that the ion exchange from zeolite was reversible when 0.01 M NaCl and KCl solution were used.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.227-234
• /
• 2022

Background and Purpose: In 2021, lung cancer in school food workers was first recognized as an occupational cancer. The classification of the carcinogenicity of cooking fumes by International Agency for Research on Cancer (IARC) was based on Chinese epidemiological data. This study aimed to determine the hazard levels of school cooking fumes in Korea. Materials and Methods: Based on public school cafeterias in one area, 25 locations were selected for the survey according to the number per school type, ventilation states, and environmental pre-assessments of cafeterias. Two inside cooking areas using a heat source and one outside cooking area were selected as control measurement points. Measurements of CO, CO₂, polycyclic aromatic hydrocarbons (PAHs), and total volatile organic compounds (TVOCs), including benzene, formaldehyde, and particulate matter (PM10, PM2.5, PM1, respectively), were taken. The concentrations and patterns of each substance in the kitchens were compared with the outdoor air quality. Result: Known carcinogens, such as the concentrations of PAHs, formaldehyde, TVOC (benzene), and particulate matter in school cooking fumes, were all detected at similar or slightly higher levels than those found outside. Additionally, substances were detected at relatively low concentrations compared to the Chinese cooking fumes reported in the literature. However, the short-term exposure to high concentrations of CO (or composite exposure with CO₂) and PM2.5 in this study were shown. Conclusion: The school cooking fumes in South Korea was a relatively less harmful than Chinese cooking fumes, however short-term, high exposure of toxic substances can cause a critical health effect.

• Journal of Space Technology and Applications
• /
• v.2 no.3
• /
• pp.206-220
• /
• 2022

There are various systems that allow humans to safely maintain their space exploration missions and lives in completely different environments, such as the International Space Station, the Moon (the closest celestial body to Earth), and Mars (the only planet in the solar system for manned mission in the 2030s). Among them, when it comes to maintaining the basic breathing of humans, the human life support air management system is a key device system. Such an air management system can be used not only for space exploration but also for undersea bases and submarines on Earth where humans reside. The air management system basically consists of an oxygen generation system, a carbon dioxide removal system, and a harmful substance removal system. In this paper, in order to develop an air management system that can be used in an underwater residential platform, the development requirements of a ground test module to be used as an experimental facility were analyzed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.153-159
• /
• 2023

As research results showed that ozonated olive oil has excellent therapeutic effects on skin diseases, attempts were made to develop cosmetics manufacturing technology using ozone. Ozone is harmful to the human body, so a separate facility must be prepared to manufacture ozonated olive oil as a cosmetic raw material. The manufacturing device developed in this study was designed as an optimized process for manufacturing cosmetics while ensuring the safety of workers involved in production. To verify the ozonated olive oil produced from the implemented device, a toxicity test was conducted on animals. After applying ozonated oil (high concentration) to the rabbit's back for 24 hours, mortality, general symptoms and symptoms were measured. A skin irritation evaluation was performed. As a result of the experiment, as a result of evaluating the test substance treatment area after a certain period of time, it was confirmed that no skin irritation was observed in all animals, confirming the safety of the ozonated oil production process and the safety of the product.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.194-200
• /
• 2024

In the past, antibiotics and antimicrobial substances have been used for the purpose of promoting the growth of livestock or treating livestock, but various problems such as the presence of livestock products or resistant bacteria have emerged. Recently, regulations on the use of antibiotics have been strengthened worldwide, and probiotics are attracting attention as an alternative. Probiotic microorganisms have already been used for human use, such as intestinal abnormal fermentation, diarrhea, and indigestion. In livestock, beneficial microorganisms are increasing in use for the purpose of improving productivity, such as promoting livestock development and preventing diarrhea. Therefore, it is advisable to understand livestock probiotics in deeper and think about effective uses. The role of probiotics in the livestock sector is made with microorganisms themselves, so it is a substance that promotes livestock growth and improves feed efficiency by settling in the intestines of livestock, suppressing the growth of other harmful microorganisms, helping digestion and absorption of ingested feed, and helping to synthesize other nutrients. There is a need for a probiotic that suppresses intestinal bacteria by supplying probiotics used as a means to minimize the effects of stress in livestock management, thereby suppressing disease outbreaks by maintaining beneficial microorganisms and suppressing pathogenic microorganisms. The purpose of this paper is to develop a brand of feed additive probiotics to improve health conditions due to increased feed intake, improve the efficiency of use of feed nutrients, inhibit the decomposition and production of toxic substances, increase immunity, reduce odor in livestock, and improve the environment. We investigated and analyzed feed additive probiotics already on the market, and developed the naming and logo of suitable feed additive probiotic brands in livestock. We hoped that the newly developed product will be used in the field and help solve problems in the livestock field.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.