• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.141-159
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.13-20
• /
• 2009

Development of a dynamic engine model is essential to predict and analyze of dynamic characteristics from a natural gas engine. Reducing the harmful exhaust emissions can be accomplished by a precise air-fuel ratio control. In this paper, the dynamic engine model was proposed and included mixture formation and intake process because the dynamic characteristics can be affected by the mixture components such as an air and a gaseous fuel. The air mass flow, the partial pressure ratio, and the gas constant are changed by variations of the components in the mixture formation and intake process. The dynamic engine model is applied to the natural gas engine for validation test. Experimental results show that the dynamic engine model is effective to predict the dynamic characteristics of the natural gas engine.

• 복식문화연구
• /
• 제27권5호
• /
• pp.415-432
• /
• 2019

The purpose of the present study was to generate a list of business ethics components according to business area for small and medium-sized fashion companies. Based on the literature review, 21 components of business ethics components were identified within five business areas. Ten CEOs(Chief Executive Officers) each participated in an in-depth interview, sharing ethical and unethical cases from their own businesses. Constant comparative analysis was used to generate important business ethics components from those cases. In results, important business ethics components for each business area are: 1) using human-friendly materials, strengthening sustainable technologies, using vegan materials, concerning safe process, and reducing waste in the material production and sourcing area, 2) enhancing an efficiency in design, developing recycle/reuse designs, avoiding to copy designs, and using messages for public interest in the product design area, 3) concerning fair-trade, reducing harmful substance, saving energy, and using ethical supply channels in the distribution and logistics area, 4) acquiring certifications, promoting consumer protection, avoiding exaggerative/false advertisements, and promoting social contributions in the management and marketing area, and 5) promoting workers' rights, complying with the law, and investing on employee educations in the labor management area. All of the ethical and unethical cases of the ten companies have involved aspects of the 21 components, thereby enhancing understandings on how each issue is being seriously considered and/or handled in the small and medium-sized fashion companies. Study findings may provide a basis for development of a research model for quantitative studies and/or educational programs related to business ethics in the fashion industry.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.63-70
• /
• 2005

It has been used so many kinds of architectural materials and interior products in current building construction, and use of composite architectural materials is increasing with the development of chemical technology. As the green architecture has become the center of public interest, much effort is conducted in advanced countries on the LCA point of view, such as restriction of architectural materials that emitting pollution substances, developing of Non-Toxic architectural materials, and recycling of used materials, etc. with the cooperation of related organizations, material manufacture companies, and construction companies. Because the kinds of materials to be used in building constructions are so various, there might be some possibility of personal and subjective choice at the time of materials selection resulting the missing the requirements of building components and the choice of harmful materials to human. One way to resolve the material problem is to present the green architectural materials which coincide with the quality performance at service and not harmful to man and nature. At this point of view, this study aims to develop the material classification model by investigating the major labelling system about green architectural materials in both domestic and abroad and to implement an efficient material selection system by making a powerful database of environmental standard and quality basis of building requirements.

• Journal of Microbiology and Biotechnology
• /
• 제18권12호
• /
• pp.1903-1907
• /
• 2008

Prodigiosin is a natural red pigment with algicidal activity against Cochlodinium polykrikoides, a major harmful red-tide microalga. To increase the yield of prodigiosin production by Hahella chejuensis KCTC 2396, significant medium components were determined using a two-level Plackett-Burman statistical design technique. Among 12 components included in basal medium, $NaHCO_3$, ${Na}_{2}{SiO}_{3}$, ${NH_4}{NO_3}$, ${Na}_{2}{SO}_{4}$ and $CaCl_2$ were determined to be important for prodigiosin production. The medium formulation was finally optimized using a Box-Behnken design as follows: 1% sucrose; 0.4% peptone; 0.1 % yeast extract; and (g/l): NaCl, 20.0; ${Na}_{2}{SO}_{4}$, 9.0; $CaCl_2$, 1.71; KCl, 0.4; and (mg/l): ${H_3}{BO_3}$, 10.0; KBr, 50.0; NaF, 2.0; $NaHCO_3$, 45.0; ${Na}_{2}{SiO}_{3}$, 4.5; ${NH_4}{NO_3}$, 4.5. The predicted maximum yield of prodigiosin in the optimized medium was 1.198 g/l by the Box-Behnken design, whereas the practical production was 1.495 g/l, which was three times higher than the basal medium (0.492 g/l).

• 대한수의학회지
• /
• 제2권2호
• /
• pp.15-24
• /
• 1962

In the previous report it was demonstrated that aqueous extracts of two Korean indigenous crude drugs, Radix Jingyu and Fructus ponciri, have an excellent tick repellent effect, and also the need for further analytical study of these crude drugs was suggested. In the experiments to be reported herein, attempts were made to find out the active ingredients from Radix Jingyu, since the aqueons extract of Radix Jingyu proved to be mone effective than that of Fructus ponciri. It will be shown that the active ingredient is indicative of Lycaconitine, a known alkaloid. An aqueons solution containing 1.5 Gms of Lycaconitine in tartrate when sprayed on a cow exerted tick repellent effect against Boophilus microplus which lasted approximately 25 days without any harmful influences on cattle. It will also be shown that the oil-fat components of Radix Jingyu act synergistically with Lycaconitine in accelerating and lengthening the effect, although the components alone have no effect under the conditions tested. It was of interest to note that the oil-fat components of Radix Jingyu showed definite repellent effect against the larvae of Boophilus microplus in laboratory experiments by the method newly devised. On the basis of these observations, it was concluded that Lycaconitine can be used as cattle tick repellent, and the evidence seems to warrant a large scale production of Lycaconitine for its widespread use. Further studies on the possible effect of the alkaloid on other genera or species of ticks and related vermins were also indicated.

• 보건교육건강증진학회지
• /
• 제24권4호
• /
• pp.181-200
• /
• 2007

Objectives: A content analysis was conducted to examine whether the current school textbooks providing smoking information are effective or not. Methods: The authors reviewed 111 qualified textbooks using elementary through high schools during 2006-2007 academic year in Korea. Educational components were coded with an analysis tool developed through the present research. Result: Tobacco education components were narrowly focused on long-term physiological consequences of tobacco use, addictiveness, and harmful ingredients and they were repetitively shown in the textbooks. Negative health consequences such as lung cancer were emphasized 10 times among 12 smoking-related textbooks. Educational messages or contents are mainly based on medical knowledge (72%) rather than psycho-social components. The US school-based smoking prevention programs, however, employ psycho-social approach with cognitive and life-skill components and they contain only 7-17% of smoking-related medical knowledge. In order to increase psycho-social smoking prevention components in Korean textbooks, the present study identified social subjects of textbooks (and relating core sessions) for elementary, middle, and high school. It also provided guidelines for school instructors to use. Conclusion: Adolescent smoking behavior is not caused by the deficit of health information, but mostly by social influences including media and peer pressure. School textbooks proving smoking information need to increase psycho-social context. One of the most effective ways as a psycho-social smoking prevention program is to use social subjects (or curriculum) of textbooks such as social studies, ethics, social cultures, social environment, and home management.

• 한국환경보건학회지
• /
• 제48권2호
• /
• pp.66-74
• /
• 2022

Background: The health effects of particulate matter (PM_2.5) bonded with various harmful chemicals differ based on their composition, so investigating and managing their concentrations and composition is vital for long-term management. As industrial complexes emit considerable quantities of pollutants, higher PM_2.5 concentrations and chemical component effects are expected than in other places. Objectives: We investigated the concentration distribution ratios of PM_2.5 chemical components to provide basic data to inform future major emissions control and PM_2.5 reduction measures in industrial complexes. Methods: We monitored five sites near the Ansan and Siheung industrial complexes from August 2020 to July 2021. Samples were collected and analyzed twice per week in spring/winter and once per week in summer/autumn according to the National Institute of Environmental Research in the Ministry of Environments' Air Pollution Monitoring Network Installation and Operation Guidelines. We investigated and compared composition ratios of 29 ions, carbon, and elemental components in PM_2.5. Results: The analysis of PM_2.5 components at the five sites revealed that ion components accounted for the greatest total mass at approximately 50% while carbon components and elemental components contributed 23~28% and 8~10%, respectively. Among the ionic components, NO₃^- occupies the greatest proportion. OC occupies the greatest proportion of the carbon components and sulphur occupies the greatest proportion of elemental components. Conclusions: This study investigated the concentration distribution ratios of PM_2.5 chemical components in industrial complexes. We believe these results provide basic chemical component concentration ratio data for establishing future air management policies and plans for the Ansan and Siheung industrial complexes.

• 한국식품위생안전성학회지
• /
• 제37권3호
• /
• pp.129-135
• /
• 2022

국내 유통되는 메주의 유해중금속 분석을 위한 기존의 분석법은 강산을 사용하여 유기물을 분해하기 때문에 분석시간이 장시간 소요되며, 사용자 또는 환경에 유해한 영향을 끼친다. 이러한 단점을 개선하기 위해서 강산을 사용하지 않고 신속하게 분석할 수 있는 laser ablation 전처리 기술을 활용하여 신속 분석법을 개발하였다. 개발된 분석법의 유효성 검증을 실시한 결과, 식품의약품안전평가원 가이드라인의 화학적 검증 요소들을 모두 만족하였다. 또한 기존 분석법과 개발된 신속 분석법을 비교 평가하였다. 메주 시료 55점에 대한 분석 시간은 기존 분석법 대비 96% 이상 단축시킬 수 있었고, 분석 결과는 90-120% 범위의 회수율로 유의적 차이가 없었다. 개발된 신속 분석법은 메주 중 유해중금속 관리에 적합할 것으로 판단된다.

• 한국식품위생안전성학회지
• /
• 제7권1호
• /
• pp.45-48
• /
• 1992

우리나라의 식품 공전에서 주류의 검사방법이 비색 및 적정의 방법으로 나타나 있다. 그러나 이런 습식분석법은 시간이 많이 걸리고 개인오차 등 심각한 문제를 내포하고 있다. 주류의 제조 과정 중 휴겔류가 생성되는데 n-propanol, 2-propanol, n-butanol, i-butanol, i-amyl alcohol이 주로 생성된다. 우리는 GC를 이용하여 개개의 물질을 분리하고 농도에 따른 신호가 직선성이 얻어지면 동시에 정성 및 정량 자료를 얻을 수 있다. 즉 GC나 GC/MSD에 의해 capillary FFAP 칼럼을 이용하여, 다섯가지 휴젤성분, 아세트알데히드, 메탄올, 에탄올 그리고 내부표준물질인 아세토니트릴을 동시에 분리하였다. 그리고 capillary FFAP 칼럼으로 분리된 각 피이크가 단일종이라는 것을 GC/MSD를 이용하여 각각의 mass 스펙트럼으로 확인할 수 있었다. 또한 내부 표준법으로 GC에 의해 각 물질에 대한 좋은 정량자료를 얻었다.