• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.286-290
• /
• 2011

LBS(Location Based System) is the essential technology of ubiquitous market and utilizes the GNSS(Global Navigation Satellite). GNSS includes GPS of USA, Galileo of Europe Union, QZSS of Japan, Compass of China, and IRNSS of India. Related researches have recently been conducted. Once the satellite is launched, the maintenance such as modification and verification of its function is difficult. Therefore, before the launch of satellites, more precise and concrete verification of performance and operations are needed. In order to do this, hardware testbed may be developed. but software simulators can provide more flexible and cost effective simulation results. These simulators should provide the essential function handling all kinds of error features experienced upon propagation of the GNSS signal. In this paper, we present a design and implementation results of a window-based simulator applying the modeling of various error features for several GNSS.

• Journal of Broadcast Engineering
• /
• v.2 no.1
• /
• pp.24-35
• /
• 1997

Basic and transmission video quality testing was performed in real-time mode using hardware video codec based on MPEG-2 MP@ML standard including subsequent transmitting and receiving satellite simulator unit. The double-stimulus Impairment scale method and the double-stimulus continous quality scale method based on CCIR 500-5 were used as an evaluation method. The whole digital broadcasting satellite system consisting of MPEG-2 codec, system mux/demux, channel codec, channel, modem, antenna, etc. was put into the overall video quality testbed and the basic and transmission error quality assessment was performed at various bitrates and BER for an integrated system performance evaluation. In transmission error video quality testing, transmission error video quality maintained on average above 3.9 point on the 5-point scale. The low-bit rate quality such as film mode(@2Mbps) highly depended on the statitical characteristics of video source and maintained on average around 2.7 point.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.740-747
• /
• 2015

Recently, mobile communication systems using the millimeter-wave frequency band have been proposed, and the importance of efficient compensation of the nonlinearity caused by 60 GHz high-power amplifiers(HPAs) is increasing. In this paper, we propose a predistorter structure based on multiple coefficient sets which are separately used to different ranges of input power values. These ranges correspond to varying levels of nonlinearity characteristics. The structure is applied to the 60 GHz HPA FMM5715X and the performance of correcting the nonlinearity of LTE signals is evaluated. Evaluation results using a hardware testbed demonstrate that the proposed predistorter structure achieves the maximum of 6 dB gain over the conventional method in terms of the adjacent channel leakage ratio(ACLR).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.96-103
• /
• 2009

This paper presents a L3 mobile terminal platform of the mobile terminal system which is a subsystem of HMm(Hig-speed Mobile Multimedia) system, which layer 3 control protocols such as RC(Radio Control), SC(Session Control), MC(Mobility Control) and application services such as VOD, FTP, VoIP for a multimedia mobile terminal are implemented on. The hardware platform is based on PXA255 and supports various interfaces and multimedia devices, and under the platform, an embedded Linux generated by the self-maden cross-toolchain, L3 control protocols and application programs were installed. The operation of HMm system under the HMm testbed has shown that this platform successfully supported SIP services, web browsing services, streaming services and etc as well as call processing. It could be the reference of the upcoming Fourth-Generation mobile terminal which the multimedia functionality will be enforced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1947-1957
• /
• 2015

CCN networking is one of the future internet. With the rapid development of network platforms emerged a wide range of services through a virtual network environment. The performance of CCN in the high bandwidth delay is important to provide various services between nations. We can check the high bandwidth delay product in federation. Federation between the nations has the advantage of being effective to do a various services for the users, and the remote heterogeneous physical hardware engine supports various environments. Data transmission delay can be occur in long distance network even though the network is federated network. In this paper, we propose CCN-Helper protocol for data transmission delay in ling distance networks. We connect from KREONET in Korea to iLab.t in Belgique in order to test CCNx over heterogeneous federated environment.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.377-389
• /
• 2021

This paper presents a framework design of a digital twin system for a vertical smart farm. In this paper, a framework of digital twin systems establishes three factors: 1) Client 2) IoT gateway, and 3) Server. Especially, IoT gateway was developed using the Eclipse Ditto, which has been commonly used as the standard open hardware platform for digital twin. In particular, each factor is communicating with the client, IoT gateway, and server by defining the message sequence such as initialization and data transmission. In this paper, we describe the digital twin technology trend and major platform. The proposed design has been tested in a testbed of the lab-scale vertical smart-farm. The sensor data is received from 1 Jan to 31 Dec 2020. In this paper, a prototype digital twin system that collects environment and control data through a raspberry pi in a plant factory and visualizes it in a virtual environment was developed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.8-14
• /
• 2020

Recently, there was an increasing demand for an integrated access control system which is capable of user recognition, door control, and facility operations control for smart buildings automation. The market available door lock access control solutions need to be improved from the current level security of door locks operations where security is compromised when a password or digital keys are exposed to the strangers. At present, the access control system solution providers focusing on developing an automatic access control system using (RF) based technologies like bluetooth, WiFi, etc. All the existing automatic door access control technologies required an additional hardware interface and always vulnerable security threads. This paper proposes the user identification and authentication solution for automatic door lock control operations using camera based visible light communication (VLC) technology. This proposed approach use the cameras installed in building facility, user smart devices and IoT open source controller based LED light sensors installed in buildings infrastructure. The building facility installed IoT LED light sensors transmit the authorized user and facility information color grid code and the smart device camera decode the user informations and verify with stored user information then indicate the authentication status to the user and send authentication acknowledgement to facility door lock integrated camera to control the door lock operations. The camera based VLC receiver uses the artificial intelligence (AI) methods to decode VLC data to improve the VLC performance. This paper implements the testbed model using IoT open-source based LED light sensor with CCTV camera and user smartphone devices. The experiment results are verified with custom made convolutional neural network (CNN) based AI techniques for VLC deciding method on smart devices and PC based CCTV monitoring solutions. The archived experiment results confirm that proposed door access control solution is effective and robust for automatic door access control.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.35-46
• /
• 2011

Future Internet should support more efficient mobility management, flexible traffic engineering and various emerging new services. So, lots of traffic engineering techniques have been suggested and developed, but it's impossible to apply them on the current running commercial Internet. To overcome this problem, OpenFlow protocol was proposed as a technique to control network equipments using network controller with various networking applications. It is a software defined network, so researchers can verify their own traffic engineering techniques by applying them on the controller. In addition, for high-speed packet processing in the OpenFlow network, programmable NetFPGA card with four 1G-interfaces and commercial Procurve OpenFlow switches can be used. In this paper, we implement an OpenFlow test-bed using hardware-accelerated NetFPGA cards and Procurve switches on the KREONET, and implement CSPF (Constraint-based Shortest Path First) algorithm, which is one of popular QoS routing algorithms, and apply it on the large-scale testbed to verify performance and efficiency of multimedia traffic engineering scheme in Future Internet.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.