• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.68-75
• /
• 2002

Stellite 12 alloy-powders were overlaid on 410 stainless steel valve seat by plasma transferred arc(PTA)process. Variation of microstructure and hardness of overlaid deposit with aging time at $750^{\circ}C$ was investigated. The deposit showed hypoeutectic microstructure, which was consisting of primary cobalt dendrite and networked $M_{7}C_{3}$type eutectic carbides. After aging new M_{23}C_{6}$ carbide was formed by the partial decomposition of $M_7C_3$ type eutectic carbides and finely dispersed $M_{23}C_6$ type carbides were also precipitated in the matrix. Hardness of the deposit was increased with increase of aging time at $750^{\circ}C$ and showed maximum value at 35hours. After showing maximum value, it was fallen down again at 70hours because of overaging. The increase of hardness in aging is ascribed to the formation of new stable $M_{23}C_6$ type carbide by the partial decomposition of $M_7C_3$ type eutectic carbides and also precipitation of finely dispersed $M_{23}C_6$ carbides in matrix.

• Journal of Korea Foundry Society
• /
• v.17 no.1
• /
• pp.36-50
• /
• 1997

Invar-type austenitic cast irons are being used as low thermal expansive materials because of its good low thermal expansion characteristics and castability despite its low hardness. The effects of alloying elements such as Cr, Ti, V, and Mo on hardness and linear thermal expansion coefficient of the invar-type austenitic cast irons were investigated. A combined use of V and Mo addition was found to be the most effective for the improvement of hardness without causing an increase in the thermal expansion coefficient. With a combined addition of 4.6wt%V and 3.8wt%Mo, the hardness increased up to 180HB and the thermal expansion coefficient was kept at a relatively low value of $4.6{\times}10^{-6}/^{\circ}C$ in the temperature range from room to $250^{\circ}C$.

• Korean Journal of Childcare and Education
• /
• v.3 no.2
• /
• pp.86-107
• /
• 2007

This research investigated the Korean students' traditional value of children in family, by asking the degree of agreement on the proverbs concerning the notion of preferring a son, negative value on a daughter, and hardness of child-rearing. The findings indicated that in general the Korean students were disagreed on the traditional value of children in family, while many of them still agreed on hardness of child-rearing. We expected that female students were likely to express the stronger disagreement on preferring a son and negative value on a daughter, but there was no difference in preferring a son. Also we expected that the students who had lived with their grandparents would more likely to have the traditional values, but they expressed the stronger disagreement on preferring a son than others. Second, in general the Korean students disagreed on familism. The female students and the students who had lived with their grandparents were likely to express the stronger disagreement on familism. Third, there was positive correlation between familism and preferring a son, and between familism and negative value on a daughter. Fourth, the students who believed that there was no absolute necessity for the child in a family expressed the stronger disagreement on preferring a son, and scored lower degree on familism. There was negative correlation between the ideal number of children in a family and the notion of hardness of child-rearing, but positive correlation between the ideal number of children and familism. And as much as they answered the longer child-rearing period, scored positive value on a daughter.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.1
• /
• pp.16-20
• /
• 2021

In this study, we tried finding new materials to improve the stain resistance properties of polymer insulating materials. Using the filtered vacuum arc source (FVAS) with a graphite target source, DLC thin films were deposited on silicon and polymer insulator substrates depending on their thickness to confirm the surface properties, physical properties, and structural properties of the thin films. Subsequently, the possibility of using a DLC thin film as a protective coating material for polymer insulators was confirmed. DLC thin films manufactured in accordance with the thickness of various thin films exhibited a very smooth and uniform surface. As the thin film thickness increased, the surface roughness value decreased and the contact angle value increased. In addition, the elastic modulus and hardness of the DLC thin film slightly increased, and the maximum values of elastic modulus and hardness were 214.5 GPa and 19.8 GPa, respectively. In addition, the DLC thin film showed a very low leakage current value, thereby exhibiting electrical insulation properties.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2001

This research conducted to investigate the variation of the moisture content, crack ratio, and hardness of the whole and cracked brown rice after conditioning at the initial moisture content of 13, 14, and 15% with time lapse. The conditioning was conducted by increasing the moisture content of the sample to 0.4 and 0.8%. For basic information and conditioning characteristics for the development of a conditioning machine for the brown rice, predicted models of above three properties were developed using a nonlinear regression analysis of SAS with Gauss-Newton, Gradient, and DUD methods. Results of this research could be summarized as follows. 1. No moisture variation occurred after 0.5 hour conditioning. 2. The increasement of the crack ratio was 7.6 and 17.5% with the sample increased the moisture content of 0.4 and 0.8%, respectively, after 8 hours conditioning. 3. The hardness of the conditioned whole grain of the brown rice decreased 0.82 and 1,000kg$\_$f/ with the sample increased moisture content 0.4 and 0.8%, respectively, after 8 hours conditioning with respect to the non-conditioned sample. 4. The hardness of the conditioned cracked grain of the brown rice decreased 0.54 and 0.81kg$\_$f/ with the sample increased moisture content 0.4 and 0.8%, respectively, after 8 hours conditioning with respect to the non-conditioned sample. The hardness of the broken grain was about 0.81∼1.88kg$\_$f/ lower than whole grain. 5. The moisture content variation, increasing rate of the crack ratio, and hardness of the cracked and whole grain was predicted as a negative exponential function. 6. Each predicted model with the nonlinear regression analysis, which was very accurate and had a very small amount of sum of square of error between experimental value and predicted value, which could be used for predicting the physical variation after conditioning.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.5
• /
• pp.115-127
• /
• 2012

This study was conducted on the measurement of soil hardness through a hardness testing machine in slopes of natural environments and artificial environments which is generally known as slope revegetation. The soil hardness as one of physicochemical soil properties is significantly associated with plant growth. Although another studies related to the slope revegetation was focused on herbaceous plants, studies related to soil properties for arbor appearance is lack. It was focused on the correlation analysis between the soil hardness and the plant appearance. the results were as follows : The higher the soil hardness is, the less the appearance of plants is as a result of survey. Species appearing in the high levels of the soil hardness represented mugwort and grass. The levels of the soil hardness in the slope of natural environments was good environmental conditions with various plants in the range of 6 to 12mm. The levels of the soil hardness in the slope revegetation was in the 6.88-30mm range. The soil hardness below 21mm showed a variety of plants with arbors and herbaceous plants, whereas it above 21mm represented a monotonous style of plant structure including Artemisia princeps, Lolium perenne, Poa pratensis L and Setaria viridis. The result of the correlation analysis between the soil hardness and the plant appearance was negatively correlated with justifiable significance levels. The result of a logistic regression analysis for tree appearance was statistically proved when the numerical value of the soil hardness is lower.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.2
• /
• pp.33-37
• /
• 1989

In order to improve hardness uniformity of standard-hardness blocks. experimental procedure was designed using Taguchi Method. For this purpose the following factors were studied: austenitizing temperature, tempering condition, grinding condition, subzero treatment, lapping time, $15{\mu}m$ polishing time, final polishing time. These factors were processed and then ten hardness values were measured on each specimen. SN (signal to noise) ratio for each condition was calculated with standard variations of these values. Finally, from the calculated value of ANOVA on SN ratios, the lapping time was found to be the main factor Better uniformity with longer lapping time implies that residual stress that was formed after quenching is a dominent parameter that affects on the uniformity of hardness. Therefore, step-quenching method was adapted to minimize the residual stress. By this modification of quenching procedure, the hardness uniformity was improved remarkably and the yield ratio was increased from 55% to 88%.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.581-586
• /
• 2011

This study describes a hydrogen embrittlement evaluation of the subsurface zone in 590DP steel by micro-Vickers hardness measurement. The 590DP steel was designed to use in high-strength thin steel sheets as automotive materials. The test specimens were fabricated to 5 series varying the chemical composition through the process of casting and rolling. Electrochemical hydrogen charging was conducted on each specimen with varying current densities and charging times. The relationship between the embrittlement and hydrogen charging conditions was established by investigating the metallography. The micro-Vickers hardness was measured to evaluate the hydrogen embrittlement of the subsurface zone in addition to the microscopic investigation. The micro-Vickers hardness increased with the charging time at the surface. However, the changing ratio and maximum variation of hardness with depth were nearly the same value for each test specimen under the current density of 150 mA/$cm^2$ and charging time of 50 hours. Consequently, it appears that hydrogen embrittlement in 590DP steel can be evaluated by micro-Vickers hardness measurement.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.616-622
• /
• 2011

This study was conducted to investigate the effects of region and age on nut quality of major chestnut cultivars (Castanea spp.) cultivated in the central region of Korea to provide basic data for nut quality control and processing of postharvest. In the survey of by regions and ages, Buyeo and 'Hyogo57' showed the highest value by regions and cultivars, respectively. Also, there were statistically significant differences among regions and cultivars in the value of soluble solid content and kernel hardness. In the soluble solid content, Gongju showed the highest value among regions, and 'Tsukuba' among cultivars was the highest, 20.5%. Cheongyang showed the highest value of kernel hardness among regions, and 'Tanzawa' among cultivars showed the lowest value of kernel hardness, $8.75kg/cm^2$. In 'Tanzawa', 'Okkwang' and 'Tsukuba', soluble solid content and kernel hardness showed statistically significant differences according to age, but no correlation with age.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.3
• /
• pp.40-45
• /
• 2009

With the increase in the annealing temperature, the volume fraction of austenite phase increased and the volume fraction of ferrite phase decreased. In compliance with the addition of N, not only the volume fraction of austenite phase was increased but also the austenite structure was made larger. Volume fraction of ${\sigma}$ phase was increased by decreasing of the volume fraction of ferrite phase, with the increase in the aging time and in compliance with the addition of N. As increasing in volume fraction of ${\sigma}$ phase, tensile strength and hardness increased, while elongation and impact value decreased. Elongation slowly decreased and impact value rapidly decreased at the early stage of aging. By the added N, tensile strength, elongation, hardness and impact value was increased.