• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.205-210
• /
• 2007

In this paper, we describe a study on the relationship between neutral emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene- or naphthalene-based amino or oxy acids at 0 to $5^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of neutral emulsion layers was studied at pH 7.0. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety $(R=NHC_6H_4-p-SO_3Me$ where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited hardening properties. The hardener can be used in neutral emulsion layer of film and showed good hardening effect.

• The Journal of Information Technology
• /
• v.10 no.2
• /
• pp.29-35
• /
• 2007

In this paper, we describe a study on the relationship between alkaline magenta emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene-or naphthalene-based amino or oxy acids at 0 to $5^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of alkaline magenta emulsion was studied at pH 8.5. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety (R=NHC6H4-p-SO3Me where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited hardening properties. The hardener can be used in alkaline magenta emulsion layer of film and showed good hardening effect.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.579-585
• /
• 2008

Numerous experimental investigations on metallic materials and solid polymers have shown that relaxation behavior is nonlinearly dependent on prior strain rate. The stress drops in a constant time interval nonlinearly increase with an increase of prior strain rate. And the relaxed stress associated with the fastest prior strain rate has the smallest stress magnitude at the end of relaxation periods. This paper deals with the performance of three classes of unified constitutive models in predicting the characteristic behaviors of relaxation. The three classes of models are categorized by a rate sensitivity of kinematic hardening rule. The first class uses rate-independent kinematic hardening rule that includes the competing effect of strain hardening and dynamic recovery. In the second class, a stress rate term is incorporated into the rate-independent kinematic hardening rule. The final one uses a rate-dependent format of kinematic hardening rule.

• The Journal of Information Technology
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2006

In this paper, we describe a study on the relationship between photographic emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene- or naphthalene-based amino or oxy acids at 0 to 5$^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of photographic emulsion was studied at pH 5.5. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety (R=$NHC_6H_4-p-SO_3Me$ where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited strong hardening properties. The hardener can be used in photographic emulsion of film and showed very good hardening effect.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2017

This paper proposes nominal flexural strength considering strain-hardening effect of HSB600 high performance steel for compact composite I-girders in positive bending. Unlike conventional steels, HSB600 undergoes strain-hardening just after yielding without going through yield plateau. However, because the nominal flexural strength specified in domestic and foreign bridge design specifications has been developed for the conventional steel composite girders, the nominal flexural strength does not appropriately consider the strain-hardening of HSB600. Therefore, plastic moment considering a strain-hardening is proposed so as to consider effect of the strain-hardening of HSB600 on flexural strength and then moment-curvature analysis is performed to a wide range of cross-sections. From results of the analysis, a parameter representing the effect of the strain-hardening on the flexural strength of HSB600 composite girders is proposed. Furthermore, by using this parameter, the nominal flexural strength considering the strain-hardening effect for HSB600 composite I-girders in positive bending is proposed and then evaluated by comparing with the current AASHTO LRFD bridge design specifications.

• Korean Journal of Animal Reproduction
• /
• v.17 no.3
• /
• pp.183-191
• /
• 1993

These experiments were carried out to investigate whether the enzyme is involved in zona hardening during normal activatin of the oocytes by sperm, and demonstrate peroxidase activity during in vitro fertilization of oocytes treated with peroxidase inhibitors(250 $\mu$M phenylhydrazine, 28mM sodium sulfite, 350mM glycine ethyl ester and 50mM sodium azide) and tyrosine analogue(12.5mM tyramine). Also, zona soluble properties of the ovarian oocytes incubated for 0, 5, 10 and 15 hr in the presence of pheylhydrazine or tyramine were studied by using $\alpha$-chymotrypsin. The results obtained from these experiments were summarized as follows ; 1. The rates of fertilizatin in control oocytes and oocytes treated with phenylhydrazine or tyramine were 69.8%, 62.3% and 88.2%, respectively. However in vitro fertilization in oocytes treated with three different peroxidase inhibitors, sodium sulfite, glycine ethyl ester and sodium azide, were not induced. The oocytes treated with phenylhydrazine had no significant effect on in vitro fertilization rate as compared to control. However there was a significantly different in fertilization between tyramine treated group and control group(P<0.01). 2. The zona solubility(t50) of control and fertilized oocytes in culture treated with phenylhydrazine or tyramine were 30.7, 26.0 and 16.3 min., respectively. Phenylhydrazine treated group and tyramine treated group had effect on inhibition of zona hardening as compared to control group. These results suggest that ovoperoxidase is involved in zona hardening during normal activation of the oocytes by sperm. 3. t50 of control oocytes and ovarian oocytes treated with phenylhydrazine or tyramine for 5, 10 and 15 hr in vitro were 14.0, 26.2 and 32.0 min., 14.5, 26.9 and 30.2 min., and 14.0, 24.3 and 31.2 min., respectively. These results suggest that zona hardening in ovarian oocytes matured for various times in vitro cannot be inhibited by peroxidase inhibitors and tyrosine analogue, that the spontaneous zona hardening incultured ovarian oocytes is not caused by the secretory products of cortical granules released during the cortical reaction, ovoperoxidase.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.496-501
• /
• 2005

Precipitates, present in most commercial alloys, can have a strong influence on strength and hardening behavior of a single crystal. The effect of thin precipitates on the anisotropy of initial slip resistance and hardening behavior of crystals is modeled in this article. For the convenience of the computational derivation and implementation, the material formulation is given in the unrelated intermediate configuration mapped by the plastic part of the deformation gradient. Material descriptions for the considered two phased aggregates consisting in lattice hardening as well as isotropic hardening and kinematic hardening are suggested. Numerical simulations of various loading cases are presented to discuss and assess the performance of the suggested model. From the results of the numerical simulation, it is found that the suggested model represents the initial plastic anisotropy at least qualitatively well and that it has an improved representation of various characteristic hardening behaviors in comparison with conventional hardening descriptions where the precipitate structure is not reflected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8479-8486
• /
• 2015

This study aim is occur in brain CT cause of beam hardening effect and reducing method, We will scan Bone opaque bead phantom on variation of image on the influence factor with equipment called 'Samatom Senation 16' with following listed herein : tube voltage, tube current, slice thickness, gantry angle, base line which affect beam-hardening effect. After that we are going to start Quantitative Analysis resulted in previous scanning and Qualitative Assessment with CT image sheet evaluation. result of quantitative analysis 140kVp $31.56{\pm}2.89HU$ on tube voltage, 150mA $-3.87{\pm}0.12HU$ on tube current, 3mm on slice thickness, and $13.31{\pm}1.03HU$ IOML on gantry angle which was the least beam-hardening effect. Like Qualitative Analysis, we went through Qualitative Assessment and most of valuers got a result of 140kVp on tube voltage, 150mA on tube current, 3mm on slice thickness. As before valuers evaluated gantry angle that scanned image from IOML or OML was the least beam-hardening effect occured. There are meaningful differences when we compare all theses factors statistically(P<0.05). therefore We consider that Minimizing artifact that caused by beam-hardening effect can provide better quality of image to deciphers and patients. if we rise tube voltage in permissible dose limit, set tube current in a limit that does not effect to image quality, use slice thickness too thin enough to harm resolution, use IOML or OML on gantry angle.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.155-158
• /
• 2005

Precipitates, present in most commercial alloys, can have a strong influence on strength and hardening behavior of a single crystal. The effect of thin precipitates on the anisotropy of initial slip resistance and hardening behavior of crystals is modeled in this article. For the convenience of the computational derivation and implementation, the material formulation is given in the unrelated intermediate configuration mapped by the plastic part of the deformation gradient. Material descriptions for the considered two phased aggregates consisting in lattice hardening as well as isotropic hardening and kinematic hardening are suggested. Numerical simulations of various loading cases are presented to discuss and assess the performance of the suggested model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03a
• /
• pp.172-184
• /
• 1996

Superplastic forming of thin sheet into complex shape is an important manufacturing process especially in aerospace industry. The main interest in modeling the superplastic forming process is to predict the forming pressure cycle to maintain optimum strain rate and the resulting thickness distribution. Many researchers have attemped to model superplastic forming using the various techniques including finite element method. But in most of their researches have disregarded the strain hardening effect which which occurs in several superplastic materials. In this study ABAQUS finite element code was used for prediction of process variables for axisymmetric cup forming of Supral 100 and 7075Al alloys considereing strain hardening. The performance of numerical results were compared with the experimental results.