• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.235-238
• /
• 1997

Basic properties of new cement pastes based on the system $CaO-Al_2O_3-P_O_5-H_2O$were studied Phosphoric acid solutions and calcium dialuminate clinkers synthesized by the hydration-burning method were used for liquid and powder components of the paste, respectively Variation in the compositions of the paste was achieved by changing the liquid/powder ratio and the concentration of phosphoric acid solution. The hardening rate of the paste was so largely affected by the amount of phosphoric acid that hardening was inhibited with the low-concentrated solution but was explosively accelerated with the high-concentrated solution. The phosphoric acid solutions of concentration of 45~50% and the liquid/powder ratio of 0.5~1.5 were favoured for the high early-strength cement paste with the reasonable hardening rate and high strength. The binding phase of hardened paste was the dense amorphous gel of the system $CaO-Al_2O_3-P_O_5-H_2O$. in which the unreacted calcium dialuminate grains were embeded.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.255-260
• /
• 1998

As a part of the study on the development of augered pile method, this study is intended to investigate the properties of fresh and hardened mortar with the proportion of expansion additives. With the increase of proportion of expansion additives, the fluidity of mortar shows a decrease while air content increases and setting time gets retarded. It show the satisfactory property in strength at 5% of proportion, and shows more expansion with the increase of proportion of expansion additives and sand/cement ratio. In conclusion, both of strength and expansion reveal appropriate at 10% of proportion of expansion additives.

• Transactions of Materials Processing
• /
• v.21 no.6
• /
• pp.354-359
• /
• 2012

Effects of a nitriding treatment on the tensile and high cycle fatigue properties were investigated by conducting ion-nitriding and gas nitro-caburizing treatments on the spheroidized SCr430B medium-carbon steel and performing tensile and tension-tension high cycle fatigue tests. The nitrided samples showed much lower strength and ductility compared to those in the initial as-spheroidized state and premature fracture occurred at the hardened layers. The micro-voids in the compound layer caused fatigue crack initiation. Thus, the removal of the compound layer with micro-voids remarkably improved the fatigue resistance to even beyond that of the as-spheroidized sample.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.51-56
• /
• 1997

This study is aimed for investigating the influence of mortar on improved of surface shape of crushed sand, and analyzing the physical properties of fresh state and hardened state. By the test results, it was found that the flow value and bleeding ratio was increased, but the change of flow value according to time was decreased with the improved surface shape of crushed sand. Also, comparing improved of surface shape of crushed sand with not improved of surface shape of crushed sand on strength, compressive strength is about the same and flexural strength decrease in case of improved of surface shape of crushed sand.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.699-704
• /
• 2003

Corrosion of reforcement is the main cause of damage and early failure of reinforced concrete structures. The corrosion is mainly progressed by the chloride ingress. In this paper, an experimental study is executed to investigate the effect of concrete properties and testing method on the coefficient of chloride diffusion. Also, it is compared that the relationship between total chloride and free chloride in concrete. According to this experiment results, w/c ratio and testing method effect on chloride diffusion coefficient of concrete. As w/c ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different value, respectively. Also, the content of free chloride in 7days curing concrete is increased as w/c ratio is increased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.81-87
• /
• 2003

The purpose of this study is the development of a recycling process to recover the hydrated ability of cement hydrate which accounts for a large proportion of cementitious powder by concrete waste in order to recycle cementitious powder by concrete waste as recycle cement. Therefore, after having theoretical consideration based on the properties of high-heated concrete, we consider the properties of hydration of cementitious powder in hardened mortar under various temperature conditions. As a result of experiment, it is revealed that an effective development of recycling cement is possible since the cementitious powder by concrete waste recovers a hydraulic property during burning at $600^{\circ}C$ or $700^{\circ}C$. And it is shown that the fluidity of mortar decreases rapidly as the burning temperature of recycle cement increases. however, the improved effect of fluidity is predominant if adding the additive such as fly-ash or blast furnace slag.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.232-238
• /
• 1996

In this paper, the properties of high-strength concrete are described with respect to materials and mix conditions(water-cement ratio, chemical admixture, replacement of fly ash). As primary purposes of this study, the optimum mix design method of high-strength concrete to decrease unit cement contents is investigated, and the properties of fresh and hardened concretes are tested in terms of slump, air content and compressive strength. As results of this study, workability and strength development of the high-strength concrete depend on the water-cement ratio, replacement ratio of fly ash and dosage of the chemical admixture. The conditions which are proposed optimum mix design of the high-strength concrete show W/C 37%, S/A 42~45% and unit cement content 470~480kg/$\textrm{m}^3$. Based on the results, the applicability of high-strength concrete in site is clearly proved.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.929-932
• /
• 2000

In this paper, physical properties of fresh and hardened mortar for floor using expansion agent are described under various grain shape, grading and chloride contents of aggregates. According to experimental results, as fineness modulous increase, fluidity show high it also shows high with cement mortar using riversand and continuous distribution of grading. We can not detect any difference in fluidity according to chloride contents. Air content shows to be decreased with crushed stone having large fineness modulous and continuous distribute on of grading. chloride content does not influence on the air content. compressive strength tends to increase when crushed sand with continuous distribution of grading is used and chloride contents decreases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.453-456
• /
• 2005

The use of lightweight concrete products is usually increased at a recently high structures. Among the rest EPSB concrete products which have an excellence on the sound and thermal insolation are used. Also, the gathering of nature aggregate is limited, so that lack of fine aggregate is appearing. The purpose of this study is to obtain basic data of properties of EPSB concrete in according to types of aggregate. The results of experiment are as follow. The EPSB concrete using bottom ash is appeared the lowest slump in fresh concrete. The EPSB concrete using river sand and bottom ash are showed as a similar compressive strength except it using crushed sand in hardened concrete.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.489-495
• /
• 2007

Effects of ultrafinely ground ash on the rheological properties of cement paste were investigated. Also compressive strength development and setting time of ultrafine ash blended cement mortar were investigated in the study. A sample with silica fume was included for comparison. According to the results of ultra fine ash blended cement paste in the lower W/B ratio, the fluidity were high, and the setting time was a little retarded. And the compressive strength of ultrafine ash blended mortar was increased in the long term. In the case of hardened cement paste at 28 days, $Ca(OH)_2$ contents was decreased in order of control, ultrafine ash, silica fume blended cement due to difference of the pozzolanic reaction.