• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.35-44
• /
• 2011

For printed electronic paper making which is high leveled dimensional stability. The furnish which is hard wood pulp and soft wood pulp, mixed with hard and soft wood pulp is added sea algae pulp. If sea algae pulp was added 15% contents, paper which is made with hard wood pulp is increased about 28% dimensional stability and soft wood pulp is increased about 32%, dimensional stability and hard wood 30% and soft wood 70% mixed pulp is increased about 40% dimensional stability.

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.295-303
• /
• 2015

공주 마곡사 대웅보전은 17세기 조선시대 건축양식을 잘 보여주는 건축물이다. 본 연구의 목적은 건축에 쓰인 목부재의 수종을 분석하는 것이며, 연구를 위하여 기둥, 창방, 평방, 추녀, 사래, 활주 총 42개의 시료를 조사하였다. 수종분석 결과 기둥, 창방, 평방, 활주는 모두 소나무류(경송류)로 식별되었다. 그러나 추녀는 느티나무 또는 은행나무였으며, 사래는 외래산 소나무류로 확인되어 다른 부재와 차이를 보였다. 이는 지붕부 부재가 다른 부재에 비해 교체율이 높은 것과 관련이 있다고 판단된다. 특히 사래에 사용된 외래산 소나무류는 근래 보수 시에 사용된 것으로 추정된다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.1-11
• /
• 2008

안성 석남사 영산전에 쓰인 주요 목부재의 수종을 식별하기 위하여 기둥, 창방, 대들보, 서까래, 청판 등 총 95점에 대하여 조사하였다. 수종은 소나무류(경송류), 외래산 소나무류, 느티나무, 은행나무, 감나무속, 배나무속, 참나무속의 상수리나무류 등 7 수종이 식별되었다. 기둥에서는 소나무류(경송류) 8점, 느티나무 1점, 배나무속 1점이 확인되었다. 추녀에서는 은행나무 2점과 느티나무 2점, 대들보에서는 소나무 1점과 느티나무 1점이 나왔다. 주심도리는 2점 모두 상수리나무류이었고, 서까래에서는 은행나무 1점과 외래산 소나무류 1점을 제외하고는 나머지는 소나무류인 것으로 밝혀졌다. 적심목에서 느티나무 1점과 감나무속 1점이 나왔다. 다른 부재는 소나무류가 대부분이었다. 서까래에서 나온 외래산 소나무 1점은 해방 이후 영산전 수리 시 사용된 것으로 추정되었다. 소나무류 이외에 다양한 수종의 목재가 사용된 것은 사찰 인근에서 쉽게 구할 수 있는 수종들을 이용하였기 때문인 것으로 사료된다.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• Carbon letters
• /
• 제3권1호
• /
• pp.1-5
• /
• 2002

The regional bio-wastes available in abundance in India were converted into porous carbon by heat treatment at different temperatures from $650-950^{\circ}C$. The wood retain shapes after pyrolysis though shrinkage occured both in axial and radial directions. The shrinkage in radial direction was found to be more than in axial direction in all woods. The density of woods and chars from these at a given temperature has been found to follow linear relationship. Chars were steam activated at temperature $700-800^{\circ}C$ for different times between 45-240 min. Both the temperature and time of activation with steam has a profound effect on surface area. Chars from softwoods like bagasse and castor oil plant were activated at lower temperature, i.e. $700-750^{\circ}C$ whereas hard wood chars have to be activated at higher temperature around $800^{\circ}C$. The morphology of wood as well as of chars has been studied by SEM. The comparison of the two showed that the nature of porosity in chars depends on precursor morphology, nature and physical state of wood and presence of inorganic compounds in the wood. Hard wood results in cross inter connected pores while softwood leads to fibriller structure. The present studies show that activated carbon with reasonably good surface area (${\sim}1000m^2/gm$) can be prepared from soft wood bio-wastes like bagasse and castor oil plant, while surface area ${\sim}1370m^2/gm$ was achieved from hard wood bio waste of pine wood.

• 한국환경생태학회지
• /
• 제29권1호
• /
• pp.62-68
• /
• 2015

In order to get basic data for flood plain restoration, we surveyed the woody vegetation in Korean natural rivers and analyzed the species' characteristics with regards to patterns of richness and diversity. These characteristics were higher in hard wood forests than those in soft wood forests, such as Salix spp. community. Futhermore, they were the highest in the Prunus sargentii-Pinus densiflora community(H' 1.095), and the lowest in the Carpinus laxiflora community(H' 0.118) among the hard wood forests. Species' richness diversity were the highest in the Salix gracilistyla community, but the lowest in the S. koriyangi community or S. koreensis community among the soft wood forests. With regards to the dominant index, just one community is over 0.9, 13 communities are between 0.3-0.7 and 15 communities are less than 0.3. The Salix koreensis community was the highest at 0.931, and Prunus sargentii-Pinus densiflora community was the lowest at 0.13. Species' richness and diversity was significantly correlated with tree layer coverages and degree of slope. These results mean that in order to increase plant species diversity in flood plains planted hard woody trees, such as oaks and fir, are needed to suit environmental conditions with steeper slope and lower canopy coverage.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.87-92
• /
• 1996

When cutting 2.0cm-thick red oak and hard maple with an air-jet-assisted carbon-dioxide laser of 2kW output power, maximum feed speed at the point of full penetration of the beam decreased with increasing the angle between grain and cutting direction. Feed speed averaged 3.75 and 3.38 meters per minute for red oak and hard maple, respectively. Gray-level of laser-cut surfaces were analyzed by image analysis system. The highest gray level of laser-cut surface was obtained when red oak was cut parallel to grain by laser. Surface profiler was used to scan the sawn and laser-cut surfaces. Center line average roughnesses of laser-cut surfaces were higher than those of sawn surfaces. Scanning electron micrographs showed the cell walls which were melted by laser.

• 한국가구학회지
• /
• 제23권2호
• /
• pp.122-129
• /
• 2012

This article was intended as fundamental materials to recognize the current status of furniture hard ware in Korean market and to fix the identity of Korean furniture, by investigating and comparing the furniture hard ware used in the Joseon era and in modern times by type, function, shape and material. The analysis of furniture hard ware of the Joseon era and modern times from the view of functional aspects was oriented to the hard ware necessary to open and close the door & drawer on one side, and to that being attached to the main body of furniture not to scratch the wood by another wood on the other side, and from this the following conclusion was drawn. First of all, "Gwangdoojung" - a kind of spike- and metal decoration on the edge of the furniture disappeared, while the function-oriented hard wares have been diversified in modern times, from the perspective of the change of kinds. Second, the functional aspect of the furniture hard ware was emphasized in modern times than the Joseon era. In other words, the hard wares of the Joseon era came into view due to their strong appeal to decoration, whereas those of modern times were mostly hidden or moderated, keeping the function substantially. Third, the hard wares from the Joseon era were shown in concrete and detailed shape motivated by natural objects and furthermore even gloriously, but the modern hard wares are simple & basic geometry, from a formative point of view. Fourth, the material aspects present that the Joseon era's hard ware was mainly cast iron, whereas that of modern times shows the diversification from metal to even plastic. Finally, the recent trend in naming of the hard wares is the words of foreign origin. This resulted from that the foreign names of hard wares are valid also after import process in Korean market, so the domestic development of hard ware as the essential factor for the furniture design is urgently necessary to establish the identity of Korean modern furniture.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.20-28
• /
• 2004

경상남도 진해시 제덕동 제덕만 일대 해안에서 발굴된 목재유물 중 일부인 26점의 유물에 대한 수종을 식별한 결과, 소나무류(Pinus spp.) 7점, 상수리나무류(Quercus spp.) 15점, 가시나무류(Quercus spp.) 1 점, 합다리나무(Meliosma oldhami Miq.) 1점, 굴피나무(Platycarya strobilacea S. et Z.) 1점, 서어나무류(Carpinus spp.) 1점으로 판명되었다. 유물의 용도별로 구분하면, 연목(목책)의 경우 소나무류, 상수리나무류, 합다리나무, 서어나무류 등으로 다양한 수종으로 이루어져 있었으며, 선박부재는 모두 상수리나무류이었고, 선체편은 소나무류로 이루어져 있었다. 그리고 용도미상의 나머지 유물은 소나무류, 상수리나무류, 가시나무류 및 굴피나무이었다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.66-71
• /
• 2004

When waterlogged wood dries up, it shrinks largely. And it is hard to recover original shape. Therefore it happens to lose the value of wood remains frequently. This paper studied how far dried waterlogged wood can recover original shape. Shape recovering course and extent are thoroughly investigated after waterlogged wood of Pinus densiflora, Quercus serrata and Styrax japonica oven-dries and instills varieties of test solution. At 1- step, oven-dried samples infiltrated by chlorous acid sodium or sodium hydroxide solution. At 2- step, wood tissues of samples were swelled by the fast decompression after infiltrating $CO_2-supercritical$ fluid at high pressure. The study investigated the possibility of shape recovering in waterlogged wood. Shape recovering rate is different with solution and wood species. Sample of sodium hydroxide solution doesn't swell anymore when using $CO_2-supercritical$ fluid. In general, the sample of sodium hydroxide solution has higher Shape recovering rate than $CO_2-supercritical$ fluid solution treated by chlorous acid sodium.