• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1335-1349
• /
• 2019

Crowdsensing technologies can improve the efficiency of smart parking system in comparison with present sensor based smart parking system because of low install price and no restriction caused by sensor installation. A lot of sensing data is necessary to predict parking lot saturation in real-time. However in real world, it is hard to reach the required number of sensing data. In this paper, we model a saturation predication combining a time-based prediction model and a sensing data-based prediction model. The time-based model predicts saturation in aspects of parking lot location and time. The sensing data-based model predicts the degree of saturation of the parking lot with high accuracy based on the degree of saturation predicted from the first model, the saturation information in the sensing data, and the number of parking spaces in the sensing data. We perform prediction model learning with real sensing data gathered from a specific parking lot. We also evaluate the performance of the predictive model and show its efficiency and feasibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.241-249
• /
• 2005

ATM based MPLS(Multiprotocol Label Switching) is discussed for its provisioning QOS commitment capabilities, Traffic engineering and smooth migration for BcN in Korea. At this time, due to the comprehensive nature of ATM protocol, ATM has been adapted as the backbone system for carrying Internet traffic[1,2,3,4]. This paper presents preventive congestion control mechanisms for detecting HTR(Hard-To-Reach) LSP(Label Switched Path) in ATM based MPLS systems. In particular, we have introduced a HTR LSP detection method using network signaling information in an ATM layer. MPLS related studies can cover LSP failures in a physical layer fault, it can not impact network congestion status. Here we will present the research results for introducing HTR LSP detection methods and control mechanisms and this mechanism can be implementing as SOC for high speed processing a packet header. We concluded that it showed faster congestion avoidance abilities with a more reduced system load and maximized the efficiency of network resources by restricting ineffective machine attempts.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.62-63
• /
• 2002

To reach 100 Gbit/in$^2$ magnetic recording densities in hard disk drives specular enhancement of giant magnetoresistance (GMR) effect in spin valve (SV) films has become one of the indispensable means for application as read elements in recording heads [1]. More recently specular spin valve (SSV) structure containing nano-oxides layers (NOL) were reported [2], where MR enhancement is caused to extended mean free path of majority spin polarized electrons through specular reflection at metal/insulator interfaces [3] in the SV films. (omitted)

• 대한치주과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.148-148
• /
• 2006

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.693-703
• /
• 2006

The purpose of this study was to evaluate the efficacy of the Sonicare $Elite^{(R)}$ power toothbrush in plaque removal and reduction of gingivitis from hard-to-reach sites of the moderate periodontitis compared to regular manual toothbrush in 12 week follow-up. 82 subjects with incipient to moderate periodontitis were randomly assigned to use either the manual or sonic brush, instructed in its use, and asked to brush 2 times a day for 2 minutes. Plaque scores were taken at baseline, 1, 4, 12 weeks using Silness & $L\ddot{o}e$ plaque index and gingival inflammation was assessed by the $L\ddot{o}e$ & Silness gingival index. The results were as follows. 1. The Sonicare $Elite^{(R)}$ power toothbrush showed a significant reduction(p<0.0001) of the plaque(Silness & $L\ddot{o}e$) and gingival inflammation(Loe & Silness). 2. The Sonicare $Elite^{(R)}$ power toothbrush showed a significant better reduction of plaque and gingivitis(p<0.05) than the manual toothbrush after 1, 4, and 12 weeks. 3. The Sonicare $Elite^{(R)}$ power toothbrush demonstrated a significant reduction(p<0.0001) of the plaque in interproximal sites(p<0.0001), buccal sites(p<0.0001) and the lingual sites(p=0.00l8) of the teeth. 4. The Sonicare $Elite^{(R)}$ power toothbrush demonstrated a significant reduction(p<0.0001) of the gingival inflammation in the interproximal sites(p<0.0001), the buccal sites(p<0.0001) and the lingual sites(p<0.0001) of the teeth. The results of this study support the findings that Sonicare $Elite^{(R)}$ power toothbrush has a great potential to remove the plaque and resolve the gingival inflammation during the period of 12 week.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.73-84
• /
• 1975

The present study was conducted to evaluate the effects of oil spill from the wastewater of Yeosu Refinery on water quality of hard clam culture beds in Taein-Ri, Kwang Yang Bay. Wastewater and oil spill may reach to the culture beds in 6-8 hours by tidal current movement. Water quality is nearly normal as unpolluted sea water except the concentration of n-hexane extractive chemicals which shows higher than unpolluted sea water in period of September to October in 1973. It may be caused by wastewater of Yeosu Refinery.

• Korean journal of food and cookery science
• /
• v.2 no.1
• /
• pp.11-16
• /
• 1986

Physicochemical properties and fatty acid composition of 12 randomly selected Korean margarines were determined, which were stored within one month since manufactured. Average moisture and fat contents of margarines were 15.09% ana 77.92% respectively. Melting point was ranged from 33.23$^{\circ}C$ to 42. 13$^{\circ}C$. Acid value and peroxide value were very low. iodine value was ranging from 59.65 to 86. 05. As a result of cluster analysis using the data of fatty acid composition, margarines divided into two groups according to their package condition, soft and hard type, were also classified into the same two groups. This probably implies that the raw materials of margarines between two groups were not the same. O1eic acid (18:1) and palmitic acid (16:0) in soft and hard type margarines respectively were the highest. Linoleic acid (18 : 2) contents showed large differences among margarines. Most of the margarines had little linolenic acid (18:3) . Generally essential fatty acid contents of Korean margarines were higher than those of the past but they didn't reach the levels of margarines made in some foreign countries.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.252-257
• /
• 2000

An efficient method is developed for mold thermal cycle analysis in repeated forming process, which is well suited to the analysis in TV glass production. plunger, which is a mold to press-form the glass, undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state in the end. If analyzed straightforwardly of this problem, it leads to more than 80 cycles to get reasonable solution, and it is yet hard to setup stopping creteria due to extremely slow convergence. An exponential fitting method is proposed to solve the problem, where an exponential function is found to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the function value at infinite time. From numerical implementation, it is found that the method reduces the number of cycles dramatically to only $6{\sim}15$ cycles to reach accurate solution within $1^{\circ}$ error. A system for the analysis is contructed, in which the thermal analysis is performed by commercial software ANSYS, and the fitting of the result is done by IMSL library.

• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.432-445
• /
• 2021

Background: The European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA) tool has been recognized by EU REACH as a preferred approach for calculating worker health risks from chemicals. Objectives: The applicability of the ECETOC TRA to occupational exposure estimation from industrial uses of methanol was studied by inputting surveyed and varied parameters for TRA estimation as well as through comparison with measured data. Methods: Information on uses of methanol was collected from seven working environment monitoring reports along with the measured exposure data. Input parameters for TRA estimation such as operating conditions (OCs), risk management measures (RMMs) and process categories (PROCs) were surveyed. To compare with measured exposures, parameters from the surveyed conditions of ventilation but no use of respiratory protection were applied. Results: PROCs 4, 5, 8a, 10, and 15 were assigned to ten uses of methanol. The uses include as a solvent for manufacturing sun cream, surfactants, dyestuffs, films and adhesives. Methanol was also used as a component in a release agent, hardening media and mold wash for cast products as well as a component of hard-coating solution and a viscosity-controlling agent for manufacturing glass lenses. PROC 8a and PROC 10 of a cast product manufacturer without LEV (local exhaust ventilation) and general ventilation as well as no respiratory protection resulted in the highest exposure to methanol. Assuming the identical worst OCs and RMMs for all uses, exposures from PROC 5, 8a, and 10 were the same and the highest followed by PROC 4 and 15. The estimation resulted in higher exposures in nine uses except one use where measured exposure approximated exposures without RMMs. Conclusions: The role of ECETOC TRA as a conservative exposure assessment tool was confirmed by comparison with measured data. Moreover, it can guide which RMMs should be applied for the safe use of methanol.

• The Korean Society of Law and Medicine
• /
• v.8 no.1
• /
• pp.9-34
• /
• 2007

Human material is considered as an independent object after departing from human body. But unlike other materials, that is not allowed for the trading because of the nature of personality. According to the present legal system, the human material is only permitted to donate to the researcher or biobank for scientific study. Bur after the collection, the human materials are regarded as a valuable assets and the collectors want to get more economic gains. If the neutral modulators serve for the justifiable circulation. The economic motivations could be prevented within material transfer processes. In real life, the neutral modulator is hard to find and most of partipants are involved in the economic interests. In this situation, it may be justifiable to permit the person who donate his body material to pursue reach through right on his material. The problem is how to measure the value of human material and how to treat the informed consent. If the essential portion of human personality is contributed to the value of human material and if only his material can be served for the invention, the tissue donator can get economic interests on his body material as his property. That is based on the rule of processing of human efforts on civil law.