• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2024

A mobile manipulator is capable of handling a wide range of workspaces by overcoming the limitations of mobility inherent in existing fixed-base manipulators. To simulate the mobile manipulator, two contact operations should be considered in the physics engines. One of these operations is the grasp stability between the gripper and the object, while the other involves the contact between the wheels of the mobile robot and the ground during driving. However, it is still difficult to choose an appropriate physics engine for simulating these contact operations of the mobile manipulator. In this paper, the performance of physics engines for simulating the mobile manipulator is evaluated. Firstly, the grasp stability of the physics engine is quantitatively evaluated based on the contact force discontinuity. Secondly, when the mobile robot is controlled by open or closed-loop control methods, differences in the path taken by the mobile robot depending on the physics engine are analyzed. To assess the performance of robot simulation, three dynamic simulators-MuJoCo, CoppeliaSim, and IsaacSim-are used along with five physics engines: MuJoCo, Newton, ODE, Bullet, and PhysX.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.85-95
• /
• 2013

As the conventional hydraulic power steering system in the passenger vehicles is being rapidly replaced by EPS (Electric Power Steering) system, performance evaluation of the EPS system has become an important issue in the automotive industries. But the evaluation process takes significant expertise since steering conditions in the test protocols must be implemented with high accuracy. EPS HILS (Hardware-In the-Loop Simulation) system is developed together with robot steering system in this study. Main components of EPS HILS system include: C-EPS hardware, CarSim vehicle model, and road reaction force generation system powered by servo motor. The robot steering system, operated by another servo motor, was combined with EPS HILS system to substitute for steering efforts of human driver. The road reaction force generation system and the robot steering system were carefully validated by using the data obtained from vehicle tests. An on-center handling test was conducted by using EPS HILS system combined with the robot steering system. In the result of this study, robot-steered EPS HILS system developed with its high reliability and no need of skilled driver's, can be widely adopted to evaluate any performance of EPS system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.243-253
• /
• 2022

Spent filters with a high radiation dose rate of 2 mSv·hr^-1 or more are not easily managed. So far, the Korean policy for spent filter disposal is to store them temporarily at nuclear power plants until the waste filters can be easily managed. Nuclear power plant decommissioning in Korea is starting with Kori unit 1. Volume reduction of waste generated during decommissioning can reduce the cost and optimize the space usage at disposal site. Therefore, efficient volume reduction is a very important factor during the decommissioning process. A conceptual method, based on the experiences of developing 200 and 800 ton compactors at Orion EnC, has been developed considering worker exposure with the followings a crusher (upgrade of compaction efficiency), an automatic dose measuring system with a NaI(Tl) detector, a shield box, an inner drum to prepare for easy handling of drums and packaging, a 30 ton compactor, and an automatic robot system. This system achieves a volume reduction ratio of up to 85.7%; hence, the system can reduce the disposal cost and waste volume. It can be applied to other types of wastes that are not easily managed due to high dose rates and remote control operation necessity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1379-1389
• /
• 2000

In this study, a design process of robotic cell is presented. This paper focuses only on the automation of workpiece handling with robot. The presented design process enables us to analyze effectiv ely the original production system and to redesign it as an optimum production system with robots. An original production system is analyzed with respect to its economical and technological requirements for automation. If automation of the given production system is feasible, the conceptual design for automation is firstly derived. Next, the detail design is derived for the optimum conceptual design. Finally, an optimum system solution is determined after the economical and technical evaluation of all the derived detail designs. The all specifications of each element of the redesigned production system and its layout are determined at the detail design phase. This paper shows a low cost supporting tool for layout design of robotic cell with SCARA type robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.492-496
• /
• 1987

The testing philosophy and control schemes are investigated and applied to construct the Automatic Microwave Leakage Inspection System (AMLIS) . AMLIS is consists of three major parts such as Material Handling Mechanism, Fine Positioning Mechanism and Scanning Mechanism. The material Handling unit is designed to perform loading and unloading microwave oven onto the testing point by pneumatic cylinder and vacuum pump. The Fine positioning part includes X-Y-.THETA. table and distance sensing equipment. The scanning part is composed of five SCARA robots, which traverse X-Y-Z catesian coordinates respectively. The leakage testing probes are placed at the end of this each robot then the path and speed are both controlled via microprocessors. A performance test of this system combined with electric parts and software is done and the basic major function of system are accomplished.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.1-7
• /
• 1998

Robots utilized in the field of welfare or agriculture should be light in weight and flexible in structure. A pneumatic actuator has properties such that it is more powerful compared with a motor of same weight, and that it is flexible, clean and unexplosive. In this paper we propose a new structure of the pneumatic actuator with two-degree-of-freedom. By using proposed pneumatic actuators, we can easily construct multi-degree-of-freedom pneumatic manipulators. Here we constructed a fourteen-degree-of-freedom pneumatic dual manipulator. The performance of the dual manipulators is confirmed through experiments for ball-handling with impedance control. In the experiments several control schemes, including the decentralized control and the simple adaptive control (SAC), were used. The results show that a flexibility of the pneumatic actuator is appropriate to accomplish the coordinative motion of the right and left arms of the robot.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1071-1076
• /
• 2011

NC machines are generally used for machining operations because of their position accuracy, path accuracy, and machining reaction force. However, some NC machines require a very large space and are expensive. Recently, industrial articulated robot arms with large handling capability and wrist torque have been developed and the corresponding sensor technology has been improved. A machining robot for three-dimensional large curved objects was developed on the basis of an automatic-path-generation method. A self-position-compensation method with a laser displacement sensor was adopted for the six-axis robot developed, because the large articulated robot arms had poor position accuracy. An automatic-path-generation method using specific points was adopted to reduce the number of teaching points and time. In order to determine the proper machining conditions, various machining conditions such as tool rotation speed, cutting angle, cutting depth, and tool moving speed, were evaluated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1205-1212
• /
• 2021

Robots that can actually help people a lot by dealing with dangerous tasks that are difficult for people to do, such as disaster situations, lifesaving, handling dangerous goods, and reconnaissance of dangerous areas, continue to become an issue. Therefore, in this paper, we intend to implement a mobile robot arm that can implement a human motion will on the robot arm to enable active response according to the situation and control the vehicle according to hand movements to give mobility. A controller is manufactured using a flex sensor and agyro sensor, and the roll and pitch values of the two gyro sensors are adjusted to control the angle of the robot arm and specify the vehicle direction. In addition, by designating the levels of the three flex sensors, the motor is operated according to hand movements, and a robot arm is implemented so that objects can be picked up and moved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.789-797
• /
• 2003

An implementation scheme and some improvements are proposed to adopt public-licensed operating system, Linux and de-facto world-wide network standard, TCP/IP into the field of behavior-based autonomous mobile robots. To demonstrate the needs of scheme and the improvement, an analysis is performed on a server/client communication problem with real time Linux previously proposed, and another analysis is also performed on interactions among TCP/IP communications and the performance of Linux system using them. Implementation of behavior-based control architecture on real time Linux is proposed firstly. Revised task-scheduling schemes are proposed that can enhance the performance of server/client communication among local tasks on a Linux platform. A new method of TCP/IP packet flow handling is proposed that prioritizes TCP/IP software interrupts with aperiodic server mechanism as well. To evaluate the implementation scheme and the proposed improvements, performance enhancements are shown through some simulations.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.54-59
• /
• 2005

The cylindrical object are widely used as mechanical parts in the manufacturing process. In order to handling those objects using a robot or an automated machine automatically, the pose of the object must be known. The pose can be described by two rotation angles; one angle about the x axis and the other about the y axis. In the many previous researches these angles were obtained by the computationally intensive algorithm, that is, fitting the data as a polynomial and doing pseudo inverse. So that, this method required high performance microprocessor. In this paper in order to avoid complex computation, a new method based on a genetic algorithm is proposed and analyzed through a series of simulations. This algorithm utilized the geometry of the cylindrical shape. The simulation results show that this method find the pose angles very well In most cases, but the computation time is randomly changed because the genetic algorithm is basically one of the random search method.