• 한국재료학회지
• /
• 제34권4호
• /
• pp.202-207
• /
• 2024

In this study, we undertook detailed experiments to increase hydrogen production efficiency by optimizing the thickness of titanium dioxide (TiO₂) thin films. TiO₂ films were deposited on p-type silicon (Si) wafers using atomic layer deposition (ALD) technology. The main goal was to identify the optimal thickness of TiO₂ film that would maximize hydrogen production efficiency while maintaining stable operating conditions. The photoelectrochemical (PEC) properties of the TiO₂ films of different thicknesses were evaluated using open circuit potential (OCP) and linear sweep voltammetry (LSV) analysis. These techniques play a pivotal role in evaluating the electrochemical behavior and photoactivity of semiconductor materials in PEC systems. Our results showed photovoltage tended to improve with increasing thickness of TiO₂ deposition. However, this improvement was observed to plateau and eventually decline when the thickness exceeded 1.5 nm, showing a correlation between charge transfer efficiency and tunneling. On the other hand, LSV analysis showed bare Si had the greatest efficiency, and that the deposition of TiO₂ caused a positive change in the formation of photovoltage, but was not optimal. We show that oxide tunneling-capable TiO₂ film thicknesses of 1~2 nm have the potential to improve the efficiency of PEC hydrogen production systems. This study not only reveals the complex relationship between film thickness and PEC performance, but also enabled greater efficiency and set a benchmark for future research aimed at developing sustainable hydrogen production technologies.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.664-676
• /
• 2016

최근 여러 사회적인 변화에 따라 한옥에 대한 수요가 증가하고 있다. 하지만 한옥은 수가공으로 인한 가격 상승의 큰 문제점을 가지고 있다. 따라서 한옥 접합부의 모듈화를 위해 기계가공과 수가공과의 성능비교를 하였다. 더글라스퍼를 이용하여 두 가공법으로 실대재 주먹장을 제작하였다. 두 가공법에 대해 휨 성능을 평가하였다. 평균 최대하중은 같은 치수의 그룹을 비교했을 때 기계가공이 수가공에 비해 약 1.5배 더 높았다. 유의성 검증결과 두 가공법 모두 각 요소의 크기변화는 강도에 큰 영향을 미치는 것으로 나타났다. 다중회귀분석을 통해 목길이와 목두께는 최대하중과 비례 관계였으나 목너비는 반비례관계인 것을 알 수 있었다. 본 연구는 한옥 접합부를 모듈화 함에 있어 기초자료로 사용할 수 있을 것이다.

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.715-722
• /
• 2006

Purpose: The main advantages of the perforator flap are minimal donor site morbidity, preservation of any main source artery and its thin characteristics. Most perforator flaps for hand reconstruction need primary and secondary procedures such as a flap debulkiness and liposuction etc. However, flap thickness of calf area is thinner than any other perforator flaps. Methods: We performed an anatomical study and clinical application of medial sural artery perforator flap. We found that there are two or more medial sural perforators located on a straight line drawn from the mid-point of popliteal crease to the mid-point of medial malleolus. Most pathway of medial sural artery comes along with this line. It is possible to observe the first perforators almost exactly 8 cm from midpoint of popliteal crease in a distal half circle drawn with a radius of 2 cm. Results: We report 12 cases in 11 patients of hand reconstruction with medial sural perforator free flap from Febrary 2003 to Febrary 2006. Complete healing was possible in 11 cases. Total flap loss for venous insufficiency was in 1 patient. During the follow-up, good contour and full range of motion was observed on hand reconstruction with medial sural perforator free flap. Conclusion: In the authors' experience, this anatomical study made it possible to prepare a diagram of the exact location of the medial sural perforators. This flap can be used to achieve acceptable functional and aesthetic results for hand reconstruction because of its thin characteristics.

• 한국의류학회지
• /
• 제13권1호
• /
• pp.79-87
• /
• 1989

In the part 1 and 2, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer and fall & winter fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the core-spun yarn woven fabrics for Korean folk clothes were measured by KES-F system. The experimental results are statistically analyzed in the aspects of the mechanical properties, their effects on the hand values, formation of weared clothes and transformation behavior. The correlation in the hand values are analyzed, too. Furthermore, there mechanical properties are discussed in comparison with those values for kimono fabrics. The main results are summarized as follows: 1. The core-spun yarn woven fabrics for Korean folk clothes have box-shaped silhouette based on higher bending rigidity and shear elasticity. 2. The core-spun yarn woven fabrics for Korean folk clothes are inferior to silk fabrics, superior to polyester fabrics in formation. 3. A drapability and wrinkle recovery of core-spun yarn woven fabrics for Korean folk clothes formation for weared clothes are inferior to polyester fabrics, superior to silk fabrics. 4. A primary factor of mechanical properties contribute to the hand values of core-spun yarn woven fabrics for Korean folk clothes are same as the Korean women's winter fabrics, except for flexibility with soft feeling. 5. As for the hand values of core-spun yarn woven fabrics for Korean folk clothes, stiffness, anti-drape stiffness are superior to those of polyester fabrics. And also, flexibility with soft feeling, scrooping feeling of core-spun yarn woven fabrics have greater values as compared with silk fabrics for Korean folk clothes.

• 대한가정학회지
• /
• 제45권4호
• /
• pp.43-51
• /
• 2007

This study analyzed the knit wear trend, which has gained attention as a sensuous and luxury item, through collection magazines, and used the technique of hand-knit to produce and present the knit wear that was designed based on the study results. Accordingly, the purpose of this study is to raise awareness of the expansion of hand knit's new expression techniques and expression areas and to verify its possibility as a higher value-added product. The trends of hand-knit wear resulted from the analysis of collections divided into the following four groups, and the knit designs were also grouped accordingly: First was "The design using object." The trend survey showed the results that the form of drops or flowers was often used as a factor of object. Accordingly, as for the study design, the drop-knitting technique, which is one of the pattern knitting techniques, was used to present a design that employed drops as the object. Second was "The design matched with woven material." It is a way to emphasize aesthetic formativeness and at the same time to activate the area of knit design by matching woven material, which is different from knit in texture, with knit. This study presented a design that tried to combine knit texture and woven material by connecting denim material with various textures and colors. Third was "The design to express see-through." A sense of showing through knit wear was expressed through changes in the type of thread or knitting technique. In this study, the sense of see-through was expressed using piano wires and wool threads and through changes in the thickness of needle. Fourth was "The design to emphasize coloring." It was analyzed that regarding the production of hand knit, the method of coloring expression was to express points, lines and sides or to create harmony by changing the material's color or texture to show particular objects or shapes. In this study, a jacket was designed using the method to express points, lines and sides by changing the material's color.

• Archives of Plastic Surgery
• /
• 제44권5호
• /
• pp.420-427
• /
• 2017

Background It can be difficult to select an appropriate flap for various defects on the hand. Although defects of the hand usually must be covered with a skin flap, some defects require a flap with rich blood supply and adequate additive soft tissue volume. The authors present their experience with the anconeus muscle free flap in the reconstruction of various defects and the release of scar contractures of the hand. Methods Ten patients underwent reconstruction of the finger or release of the first web space using the anconeus muscle free flap from May 1998 to October 2013. Adequate bed preparations with thorough debridement or contracture release were performed. The entire anconeus muscle, located at the elbow superficially, was harvested, with the posterior recurrent interosseous artery as a pedicle. The defects were covered with a uniformly trimmed anconeus muscle free flap. Additional debulking of the flap and skin coverage using a split-thickness skin graft were performed 3 weeks after the first operation. Results The average flap size was $18.7cm^2$ (range, $13.5-30cm^2$). All flaps survived without significant complications. Vein grafts for overcoming a short pedicle were necessary in 4 cases. Conclusions The anconeus muscle free flap can be considered a reliable reconstructive option for small defects on the hand or contracture release of the web space, because it has relatively consistent anatomy, provides robust blood supply within the same operative field, and leads to no functional loss at the donor site.

• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.197-206
• /
• 2010

The purpose of this study is to dye hanji/cotton fabrics using persimmon juice and to investigate the change in the hand fabrics. Using the Kawabata Evaluation System, we have examined the changes in the physical properties, primary hand value and total hand value. The dynamic characteristics of hanji/cotton fabrics have been explored by tensile, shear, bending, compression, surface properties, thickness and weight. As a result, it can be seen that the linearity of load-extension and tensile resilience are increased with the increase of the concentration and dyeing times of persimmon juice and tensile energy is decreased in the same condition. These behaviors are shown in the compression properties. Although the mechanism of persimmon juice dyeing has been widely discussed, it means that the fabrics dyed with persimmon juice become stiffened and the elasticity is increased with the introduction of persimmon on the fabrics studied. Bending rigidity and hysteresis of the bending moment are increased with the increase of the concentration and dyeing times of persimmon juice. Also, Geometrical roughness, expressed in SMD is increased with increasing the concentration and dyeing times of persimmon juice, compared with as-received. It indicates that these results are due to the geometric structure of hanji yarn and the introduction of persimmon juice on the fabrics studied. The fullness and softness with the soft feeing are increased a little due to the tannin component of persimmon juice introduced on the fiber surface.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.

• 한국의류학회지
• /
• 제31권1호
• /
• pp.68-76
• /
• 2007

The purpose of this study is to investigate change of mechanical and physical properties, shape behavior and hand value in weft knit when rib stitch and milan stitch are combined. The knit stitches used in this study are plain stitch, half milan rib stitch, milan rib stitch, $2{\times}1$ rib stitch, $2{\times}1$ half milan rib stitch and $2{\times}1$ milan rib stitch. We analyzed physical and mechanical properties(tensile, bending, shear, compression, surface properties, thickness and weight) of the knit stitches and calculated their primary hand value and total hand value through translational formulas using the KES(Kawabata Evaluation System). The results are as follows; In evaluation of mechanical properties and hand values of knit stitches, plain stitch had the highest flexibility and the lowest T.H.V. as women's winter knit wear. Since $2{\times}1$ rib stitch had too high elongation in one direction, although it had the highest T.H.V, it needs to be careful when plain stitch and $2{\times}1$ rib stitch are applied for women's winter knit wear. Since Milan rib stitch and $2{\times}1$ milan rib stitch had high T.H.V. similarly, it is considered that they are suitable for women's winter knit wear. Specially, when Milan stitch is combined with $2{\times}1$ rib stitch, its shape stability and fullness are contained and flexibility is added on it. Therefore, $2{\times}1$ milan rib stitch can be also applied for women's winter knit wear.

• 한국의류학회지
• /
• 제23권5호
• /
• pp.726-736
• /
• 1999

The purpose of this study was to obtain the basal information for standard amount of clothing weight indoor climate and working condition with investigating seasonal changes of skin temperature and factors influencing on that in Koreans. Forty eight subjects in 5 age groups(6-11, 12-19, 20-44, 45-64, 65-76 years old) with both sexs were measured skin temperature indoor climate clothing microclimate clothing weight and skinfold thickness in neutral condition in each month throughout the year. The results obtained are summarized as follows : 1. Indoor climate koreans felt comfortable ranged 18.1-28.7$^{\circ}C$ and 51-74%RH. 2. Temperature inside the clothing ranged 30.8-32.3$^{\circ}C$ in males and 31.0-32.5$^{\circ}C$in females. There was a significant difference in temperature inside the clothing among age groups : That of 6019 age group was slightly higher than that at 45-76 age group. 3. Total clothing weight changed with season and increased in order of summer autumn spring and winter Total clothing weight of 65-76 age group was significantly greater on January and February. Breast skinfold thickness showed the smallest value in summer and the largest value in winter year. In addition to breast and abdomen skinfold thickness were larger in 45-67 age group while thigh skinfold thickness was larger in 6-19 age group. Skinfold thickness in females showed the smallest value in spring summer and the largest value in autumn and winter. In addition to triceps and suprailliac skinfold thickness were larger in 45-64 age group while thigh skinfold thickness was larger in 12-19 age goup. 5. Temperature of the lower limbs(hand, thigh. leg, and foot) showed significant correlation with the indoor temperature humidity inside clothing and total clothing weight. Temperature of the torso(breast and abdomen) showed significant correlation with the temperature inside clothing in all subjects. Abdomen skinfold thickness of all age group in male showed significant correlation with the abdomen skin temperature. triceps suprailliac and thigh skinfold thickness of 6-11 age group in female showed significant correation the upperarm abdomen and thigh skin temperature. Consequently clothing mdicroclimate total clothing weight and skinfold thickness showed significant difference in season sex and ages and had a slight effect on skin temperature.