• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.45-45
• /
• 2018

We had already reported the successful germination for green pods of purple lady's slipper orchid (Cypripedium macranthos Sw.). The green pod methods is to take immature seeds in green capsules, sterilize the capsule, and take out the sterile seeds. This method, however, needs very critical time of harvest. The critical time of seed harvest changes depending upon the species, condition of the specimen, and climatic influence, and the right time lies between 5 and 12 weeks after fertilization. In this study, the mature seeds were collected after 120-130 days with hand-polination of lady's slipper orchids. Mature seeds are usually dormant and it has to be overcome, either with hormone or storing the seeds near freezing for two or three months to break dormancy. The seeds were first surface sterilized with 70% ethanol and then transferred 1% NaOCl for 10-15 minutes, followed by rinses 3 times with sterilized distilled water. The cypripedium seeds consists of an embryo within a seed coat known as a testa. The testa is water repellent and the seed has a large air space between the embryo and testa so the seed tends to float on water. We had resolved the problems with vacuum pump to soak water into the testa before sterilization. The seeds were placed on liquid or agar solidified germination media. Cultures were incubated at $24{\pm}1^{\circ}C$ in dark. The seeds were germinated in 6-8 weeks in liquid suspension culture (germination percentage over 18%); however, the seeds on agar solidified media took more than 5 months to germinate and the germination percentage less than 5%. The most effective media for liquid culture was 1/4 strength Murashige and Skoog (MS) medium with 50 ml/l coconut water ($4brix^{\circ}$) at pH 5.8.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.8-14
• /
• 2011

The optimal geometry of the gate field plate in AlGaN/GaN-on-Si HEMT has been proposed using two-dimensional device simulation to achieve a high breakdown voltage for a given gate-to-drain distance. It was found that the breakdown voltage was drastically enhanced due to the reduced electric field at the gate corner when a gate field plate was employed. The electric field distribution at the gate corner and the field plate edge was investigated as functions of field plate length and insulator thickness. According to the simulation results, the electric field at the gate corner can be successfully reduced even with the field plate length of 1 ${\mu}m$. On the other hand, when the field plate length is too long, the distance between field plate and drain electrode is reduced below a critical level, which eventually lowers the breakdown voltage. The highest breakdown voltage was achieved with the field plate length of 1 ${\mu}m$. According to the simulation results varying the $SiN_x$ film thickness for the fixed field plate length of 1 ${\mu}m$, the optimum thickness range of the $SiN_x$ film was 200 - 300 nm where the electric field strength at the field plate edge counterbalances that of the gate corner.

• Journal of Korean Public Health Nursing
• /
• v.14 no.2
• /
• pp.229-245
• /
• 2000

Previous studies have shown that five representative behaviors affect the health of adults in everyday life : smoking, drinking, exercise, nutrition, and stress. This study focuses on these five behaviors in an attempt not only to develop a program that promotes health, but also to suggest ways that such a program may be implemented to reflect diverse lifestyles. Our aim is to show how individual subjectivity influences behavior when making lifestyle choices that affect health. By analyzing individual characteristics, we tried to group people according to their common attitude and behaviors to promote health. We hope that this study may provide the fundamental data which may be used to assist professionals in promoting healthy behaviors among adults. In order to examine how subjectivity(e.g, personal opinions or attitudes) influences behavior, we prepared Q-statements which were composed of Q-samples for the study of human subjectivity. We polled forty-two adults and then analyzed the results using a PC qunal program. As a result, the respondents were classed according to six different types. Type One includes people who think managing stress is the most effective way to live a healthy life. They regard smoking and drinking as harmful behaviors. Type Two subjects, on the other hand, regard smoking and drinking as a matter of taste with few harmful effects. Although they recognize the importance of managing stress, they have a positive attitude towards smoking and regard nutrition as a minor factor in promoting their healthy lifestyle. Those classed as Type Three emphasize the necessity of exercise. They perceive drinking, smoking, and stress as harmful. People in this category seek to increase physical strength and to regulate all five health behaviors by keeping them in a normal range. Type Four consists of people who are indifferent to their health. While they seem to recognize the importance of regular exercise, they pay little attention to nutrition or to the harmful effects of smoking, drinking, and stress. They believe that exercise alone is sufficient to maintain their health. Type Five subjects believe drinking is not a harmful behavior at all. Rather. it has a positive effect on their mental health. They are characterized by this positive attitude towards drinking as well as by indifference toward nutrition (although they readily admit that good nutrition is important). Finally. those classed as Type Six have a positive attitude toward moderate drinking as a means to relieve stress. However. they also recognize the harmful effects of excessive drinking. They regard good nutrition as an important lifestyle choice but are indifferent toward exercise. This type is engaged in passive health management. This study devised six types or categories that reflect different attitudes toward promoting health in everyday life. It further went on to analyze the characteristics of each type. This study shows that programs designed to promote health must be modified to reflect the diversity of individual attitudes and patterns of behaviors.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.307-314
• /
• 2002

Utilization of demolished-concrete as recycled aggregate has been researched for the purpose of substituting for insufficient natural aggregate, saving resources and protecting environment. There, however, are some Problems not only the large difference of dualities in recycled aggregates but also a little deterioration of mechanical properties in recycled aggregate concrete in comparison with that of natural aggregate concrete. In this study, the test results of freez and thaw durability of concrete with demolished-concrete recycled aggregate(DRA) arc as follows. Improvement of crushing process is an important assignment because that adhered mortar on source-concrete recycled aggregate(SRA) and DRA highly affects thc qualifies of recycled aggregate. The compressive strength of recycled aggregate concrete was not highly different in comparison with that of control concrete. But the resistance to penetration of Cl in recycled aggregate concrete was shown smaller than that of control concrete because of adhered mortar on recycled aggregate. The resistance to frcezing and thawing of recycled aggregate concrete was highly different due to adhered mortar on recycled aggregate, and durability factor of concrete with NA-SRA and DRA was more decreased than that of control concrete. On the other hand, durability factor of concrete with AA-SRA was larger than that of control concrete. It, therefore, is necessarily required that recycled aggregate including adequate entrained air should be used for satisfying the freez and thaw durability of recycled aggregate concrete.

• KOMUNHWA
• /
• no.70
• /
• pp.35-62
• /
• 2007

Songguk-ri site gained academic recognition by the excavation of stone coffin tomb with a bronze dagger in 1974. And it is confirmed that this site is epoch-making in Korean bronze age through the following excavation started in 1975. But the excavation reports published until now do not have even overall view of this site, thus it is difficult to get the whole picture of this site. Thus, in this paper the author reexamined all reports on this site and by making the map of overall view and distribution of archaeological features as a basic research. Moreover, I analyzed also artifacts from this site, and compared with the recent papers written by other researchers about the chronology and character. Songguk-ri site has livelihood domain which consists of dwelling pits, attached features, storage pits, pot-firing features, wood fence, abatises, buildings above ground, as well as cemetery which consists of stone-coffins, jar-coffins, pit tombs. Trace of making large terrace was also excavated. These features seem to belong to the same archaeological stage, dated about B.C.850-550, according to C14 dating. On the other hand, the intensification of wet-rice cultivation made this group more productive. Based on this financial strength, some influential group emerged they constructed defensive settlement to protect their products safely. Besides it seems that there were frequent occurrence of conflicts. However, we can know that they kept their stable life, through the expansion of living space. Consequently, Songguk-ri site played a role of the summit among some settlement in this area.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.219-225
• /
• 2014

In this study, to find the characteristics of the oscillation of a terminating shock wave in a transonic airfoil flow with non-equilibrium condensation, a NACA00-12,14,15 airfoil flow with non-equilibrium condensation is investigated through numerical analysis of TVD scheme. Transonic free stream Mach number of 0.81-0.90 with the variation of stagnation relative humidity and airfoil thickness is tested. For the free stream Mach number 0.87 and attack angle of ${\alpha}=0^{\circ}$, the increase in stagnation relative humidity attenuates the strength of the terminating shock wave and inactivates the oscillation of the terminating shock wave. For the case of $M_{\infty}=0.87$ and ${\phi}_0=60%$, the decreasing rate in the frequency of the shock oscillation caused by non-equilibrium condensation to that of ${\phi}_0=30%$ amounts to 5%. Also, as the stagnation relative humidity gets larger, the maximum coefficient of drag and the difference between the maximum and minimum in $C_D$ become smaller. On the other hand, as the thickness of the airfoil gets larger, the supersonic bubble size becomes bigger and the oscillation of the shock wave becomes higher.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.137-145
• /
• 2015

This study aimed to develop epoxy putty as a multi-purpose connection and restoration material that can be used for material-specific restoration work such as metal, wood, ceramics, earthenware and stone artifacts by replacing synthetic resins currently being used for preservation treatment of cultural assets. Existing synthetic resins have the issue of cutting force resulting from high strength, deflection resulting from long hardening time, contaminating the surface of artifacts through staining on tools or gloves and need for re-treatment resulting from material discoloration. Accordingly, paste type restoration material most widely being used in the field of cultural assets preservation treatment was selected and examined the property to select it as an object of comparison. Based on such process, epoxy putty was developed according to the kind of agent, hardener and filler. For the purpose of solving the issues of existing material and allowing the epoxy putty developed to have similar property, property experiments were conducted by selecting agents and hardeners with different characteristics and conditions. The study findings showed that both kinds are paste type that improved work convenience and deflection issue as a result of their work time of within 5~10 minutes that are about 3~10 times shorter than that of existing material. In regards to wear rate for increasing cutting force, it improved by about 3 times, thereby allowing easy molding. For the purpose of improving the issue of surface contamination that occurs during work process, talc and micro-ballon were added as filler to reduce the issue of stickiness and staining on hand. Furthermore, a multi-purpose restoration material with low shrinkage, low discoloration and high cutting force was developed with excellent coloring, lightweight and cutting force features.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.2
• /
• pp.5-34
• /
• 2017

This study measured greening level on the 978 public libraries nationwide, making and distributing questionnaires based on green library evaluation indicators developed to measure the greening level of public libraries. As a result of analyzing the averages by evaluation area, among the green library evaluation areas, the whole average of the library resources was the highest by 1.93, and followed by land use and traffic 1.81, indoor environment 1.30, management of water circulation 1.20, etc. The greening evaluation area which shows the best strength in the surveyed public libraries, was the area of the library resource, and it turned out that it use spaces effectively like effective use of the entire area, effectiveness of conservation of books, use and management of eco-friendly products etc., or use the equipments in eco-friendly way which are purchased or used frequently in the libraries, and, as for the land use and traffic area, most of the libraries had bicycle racks, and chose the location of the libraries, considering accessibility to public transportation and a distance between central urban area and libraries. Also, it turns out that, in the area of materials and resources, most of the libraries were equipped with hand dryers and rolling towels and maintained the eco-friendly view.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.233-256
• /
• 2006

The purpose of this study was to analyse between foreign curriculum and our high school industrial technology subject-matter curriculum, to review trend and stream of curriculum revision, and purpose and content system of subject-matter. This study was conducted through reviewing literature; research reference, journal, book, and Web materials. in this study, comparative target country was restricted to Japan, U. S. A., U. K., and N. Z., Australia that administer to similar subject with our industrial technology subject-matter. The major finding of this study were as follows: 1. A similar subject-matter with our industrial technology subject0matter was Japan' 'foundation of industrial technology' and 'project research', U. S. A.' 'technology' and etc, U. K.' 'design and technology', and N. Z.' 'technology', 'New South Wales in Australia' design and technology'. 2. The result of analysis to purpose and strength of subject-matter, our' industrial technology subject-matter was oriented to knowledge, understanding and career search in industrial area. but, the other was emphasized technological problem solving by process-based method with thinking and action. 3. In the curriculum content, our country was treat to content area of a broad industrial world. on the other hand, Japan; relationship between human and technology, environment, process technology and product technology, project research. U. S. A.; technology content standards by knowledge, process and context, U. K., N. Z., and Australia were focused 'design process'. Based on above results, the recommendation can be established as follows: 1. A study on the implementation of industrial technology curriculum. 2. A study on the perception and need assessment of expert and stakeholder about purpose and content system. of industrial technology subject-matter.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.314-325
• /
• 2000

Thermal degradation of thermoplasitc polyurethane modified polycarbonate has been investigated by means of DSC, GPC and FT-IR techniques. The polyurethanes used in this study are TPU-35 and TPU-53 containing 35.5 and 53.4 wt% of hard segments, respectively. The more content of hard segment, the higher the glass transition temperature (T$_{g}$) of TPU was observed. On the other hand, the T$_{g}$ of the TPU modified PC decreased with the content of TPU and the annealing temperature regardless of the hard segment contents. The latter behavior nay arise from the thermal degradation of TPU upon annealing process: the observed thermal degradation temperatures were at 240 and 25$0^{\circ}C$ for the PC/TPU-35 and PC/TPU-53, respectively. The molecular weight, molecular weight distribution and viscosity agree well with the DSC measurement, which implicates a thermal degradation of TPU. In addition, thermal stability of the TPU modified PC linearly decreased with an incorporation of TPU. Transesterification or any interaction was not observed using FT-IR: the evidence was no frequency shift or any variance betwere the carbonyl stretching and NH group. For the specimens prepared below the degradation temperature, the enhancement of the thickness dependent impact strength of the PC/TPU blend was observed, and the morphology of the two blends was compared.d.