• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.142-151
• /
• 2005

Several advanced countries have been continually developed PHC pile cutting automation machines for improving productivity, safety and quality of the conventional PHC pile cutting work. However, the target work of the previously developed PHC pile cutting automation machines is only crushing the head of PHC pile. Dangerous grinding work is still performed by workers with seven inch hand grinder. In domestic construction industry, the PHC pile cutting work is usually performed by a crusher and three to four skilled workers. Recent analysis results of the PHC pile cutting work reveal that it frequently makes a lot of cracks which significantly reduce the strength of the pile and is labor-intensive work. The primary objective of this study is to propose the end-effector which can effectively break PHC pile without any longitudinal cracks and to develop an automated pile cutting machine having unified grinder and crusher parts through a wide variety of laboratory and field tests. It is anticipated that the development of the automated pile cutting machine would be able to bring improvements in safety, productivity, quality as well as cost saving.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.545-549
• /
• 2008

The surface characteristics of calcined ${\gamma}-Al_2O_3$ particles as well as ${\gamma}-AlO$(OH) sol particles were controlled by aging in the boehmite sol preparation. As a result of the study, the IEPs of ${\gamma}-AlO$(OH) particles were decreased from pH 9.25 to pH 8.70 and those of the calcined ${\gamma}-Al_2O_3$ particles were decreased from pH 9.90 to pH 8.86 by the increase of the aging times. As a result of the acidic and basic characterization of the calcined ${\gamma}-Al_2O_3$ particles by the aging, the amount of acid sites was decreased from 0.1367 mmol/g to 0.0783 mmol/g by the increase of the aging times and Hammett acidity, $H_o$ was showed the acidic strength of 4.8 or above. On the other hand, the amount of basic sites was decreased from 0.4399 mmol/g to 0.3074 mmol/g by the increase of the aging times. Based on these results, we proposed the fact that the aging step in the sol-gel process was an important step to control the surface characterization of ${\gamma}-Al_2O_3$ particles including acidity and basicity.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.2
• /
• pp.98-108
• /
• 2016

In recent days, perhaps the biggest driver in new material development is the desire to improve restorations esthetics compared to the traditional metal substructure based ceramics or all-ceramic restorations. Each material type performs differently regarding strength, toughness, effectiveness of machining and the final preparation of the material prior to placement. For example, glass ceramics are typically weaker materials which limits its use to single-unit restorations. On the other hand, zirconia has a high fracture toughness which enables multi-unit restorations. This material requires a long time sintering procedure which excludes its use for fast chair side production. Hybrid ceramic material developed for CAD/CAM system is contained improved nano ceramic elements. This new material, called a Resin Nano Hybrid Ceramic is unique in durability of function and aesthetic base compositions. The new nano-hybrid ceramic material is not a composite resin. It is also not a pure ceramic. The material is a mixture of both and consists of nano-ceramic fillers. Like a composite, the material is not brittle and is fracture resistant. Like a glass ceramic, the material has excellent polish retention for lasting esthetics. The material is easily machined by chair side or in a dental lab side, could be an useful restorative option.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.347-359
• /
• 2011

This study has developed the index for diagnosis on possibility that typhoons (TYs) affect Korea. This index is closely related to the strength of the western North Pacific high (WNPH), which is calculated as a difference in meridional wind between at the highest correlation area (around Korea) and at the lowest correlation area (sea southeast of Japan) through a correlation analysis between TC frequency that affects Korea and 500 hPa meridional wind. In low frequency years that selected from Korea affecting TC index, anomalous northeasterly is strengthened from Korea to the South China Sea because the center of anomalous anticyclonic circulation is located to northwest of Korea. Thus, TCs tend to move westward from the sea east of the Philippines to the mainland China. On the other hand, in high frequency years, anomalous southwesterly serves as steering flow that more TCs move toward Korea because the center of anomalous anticyclonic circulation is located to sea east of Japan. Consequently, this study suggests that if this index is calculated using real time 500 hPa meridional winds that forecasted by dynamic models during the movement of TCs, the possibility that TCs approach Korea can be diagnosed in real time.

• Composites Research
• /
• v.29 no.6
• /
• pp.342-346
• /
• 2016

Carbon fiber reinforced plastic (CFRP), one of lightweight materials, is the fiber structure using carbon fiber. It is the composite material that has the characteristics of carbon and plastic. As for the fiber structure, it has the great strength due to fiber direction. CFRP for woven type is used mostly as such a CFRP with lightweight. Woven type is more stable when compared with unidirectional type. On the other hand, woven type is highly priced. Therefore, this study aims to analyze the fiber structure of unidirectional CFRP. In this study, as the stacking angle [0/X/-X/0], X is the variable. This is unidirectional CFRP in which the angle phase of X has been reversed and stacked. By using such a unidirectional CFRP, the analysis model which had a crack at the center as the form of panel with the thickness of 2 mm was used. On analysis, the load is applied on the upper and lower parts being connected with a pin. The damage in the area near center crack was investigated. As for the analysis model, 3D surface model was designed by using CATIA. For CFRP stacking, the stacking direction was determined by using ACP in ANSYS program and the analysis model with two stacks was made. Afterwards, the structural analysis was carried out.

• The Journal of Society for e-Business Studies
• /
• v.24 no.4
• /
• pp.49-78
• /
• 2019

In the context of knowledge sharing, network position has been a controversial subject. A central position in the network provides access to non-redundant knowledge, leading to more opportunities of knowledge sharing. On the other hand, as "bridging" relationships, its characteristics as a "weak tie" suggest innate lack of trust and reciprocity which is considered an impediment to share knowledge. This paper attempts to enlighten the underlying dynamic by examining the interaction between network centrality, motivation and ability in knowledge sharing. Furthermore, this paper examines the concept of knowledge sharing ability in depth by operationalizing the construct into three aspects: extensive and diverse knowledge, social media utilization ability and self-efficacy. The results show a partially supported three-way interaction, where the highest level of knowledge provision is reported when the employee has low network centrality, high autonomous motivation and high knowledge sharing ability, i.e. extensive and diverse prior knowledge. Though all models indicate strong associations between network centrality and knowledge sharing, this suggests an even greater power of motivation and ability that gives the strength to overcome unfavorable environments of peripheral position. Therefore, this paper offers an alternative explanation to the existing debate whether network centrality positively or negatively influences knowledge sharing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.319-332
• /
• 2004

Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.143-152
• /
• 2014

This paper introduces Database security to prevent the rapidly increasing issue of private information leakage. The Database security examined in the paper separates into DB access control area and DB encryption area which further leads the paper to analyze the factors of the two areas and suggest necessary elements for creating stable Database security. In addition, the paper examines previous DB security programs by areas and analyzes pros and cons from the tested result. The experiment indicated that while DB access control presents less degradation and reduced the need to modify the existing DBMS since the access control operates at the end point of the network, DB encryption presented strength in protecting the data from unauthorized access. On the other hand, DB access control is less useful in preventing the attack in advance which leaves the log to enable tracking afterward while DB encryption can only be operated by limited types of Database and causes degradation due to system load and shows higher percentage of failure when creating the system. This paper examines characteristics of Database security areas in order to be used as a reference for institutions or companies seeking stable Database security.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.96-96
• /
• 2017

Rice is a staple food for nearly half of the world's population, with more than 10,000 rice varieties providing almost one-quarter of the global per capita dietary energy supply. Grain size, panicle size and branch number, grain number in a panicle are directly associated with rice productivity. Recently several genes which increase grain yield were identified through map-based cloning. Gn1a, Cytokinin oxidase, is a major grain number QTL and regulates grain number per panicle. Dep1 increases panicle branching and reduced rachis length. SCM2 (APO1) was identified by a QTL for culm strength and increased spikelet number. OsSPL16 (GW8) controls grain size and shape and then increases 1000-weight of seed. In here, to identify genotype of genes related to yield in 400 of rice germplasms possessed in National Institute of Crop Science, we had first chosen 4 of well-known genes related to yield; Gn1a, Dep1, SCM2, and OsSPL16. Among these germplasms, 195, 382, 165, and 353 of germplasms harbored the dominant type of Gn1a, Dep1, SCM2, and OsSPL16, respectively. We grouped these germplasms into a total of 10 groups using genotypes of Gn1a, Dep1, SCM2 and OsSPL16. Most rice germplasms belong to group 1, harbored Gn1a, dep1, gw8 and APO1, and group 10, harbored gn1a, Dep1, GW8 and apo1. Hanareum2 is the highest productive cultivar in Korea but do not have dominant type OsSPL16, so belong to group 1. On the other hand, in the case of Unkwang, belongs to group 10, which has dominant type of OsSPL16 but do not have the remaining genes. We can grasp the differences in rice germplasms through the Profiling of genes related to these grain yield, which will be useful for cross-breeding to integrate grain yield genes. We are continuously observing the genotype and phenotype of rice that possesses grain yield genes.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.279-284
• /
• 2013

In this study, the feasibility of a single-stage thermophilic aerobic process for the treatment of high-strength food wastewater produced from the recycling process of food wastes was examined to substitute anaerobic digestion process. Also, the removal and stability of thermophilic aerobic process were assessed according to the changes of hydraulic retention times (HRTs) and organic loading rates (OLRs). When the OLR increased from 9.2 to $37.2kgCOD/m^3d$, a pH value in R1 (HRT : 5 d) significantly decreased to 5.0, due to the organic acid accumulation. On the other hand, the pH value in R2 (HRT : 10 d) was stable and R2 showed the high removal of COD, organic acid and lipid, even though the OLR increased from 4.6 to $18.6kgCOD/m^3d$. In R1, the COD loading rates for COD removal was suddenly dropped, as the COD loading rate increased from 18.6 to $28.4kgCOD/m^3d$. In contrast, R2 showed that the COD loading rates for COD removal increased with regard to increment in the loading rates of 3.61, 7.05, 9.43 and $12.2kgCOD/m^3d$, indicative of the high COD removal efficiency. Therefore, the results demonstrated that over 10-d HRT, the high concentration of raw food wastewater was efficiently treated in the single-stage thermophilic aerobic process.