• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.318-331
• /
• 2021

This study was conducted on the assumption that bone age would be more effective when it comes to physique and physical fitness assessment for adolescents, and the purpose of this study was to identify the differences in physique and physical fitness for students in their adolescence through bone age and chronological age in order to contribute to the well-balanced physique and physical fitness development in adolescents and the health improvement in students. Total 874 adolescents(483 males, 391 females) aged 11~16 were selected as subjects out of the total population of 1100 adolescents aged 6~16 based on the PAPS(Physical Activity Promotion System) and age standards of the TW3 method; and skeletal maturation, which symbolize the indicators of biological maturation, were evaluated by using the TW3(Tanner-Whitehouse 3) method after hand-wrist radiographs, and birth date was used for chronological age. A stadiometer and InBody 270 (Biospace, Korea) were used to measure 2 components in physique. A total of 7 components in physical fitness, which included muscular strength, muscular endurance, flexibility, power, cardiovascular endurance, balance, agility, were measured as well. A independent samples t-test was conducted for data processing using SPSS 25.0, and the significance level was set at p< .05. The study results are as follows. First, bone age and chronological age used for physique comparison in males aged 11 and 12, height and weight showed significant difference; in males aged 13, weight showed signicant difference. Weight and height in females aged 11, and height in females aged 12 showed significant difference. Second, bone age and chronological age used for physical fitness comparison in males aged 11, muscular strength, power, flexibility, cardiovascular endurance showed significant difference; in males aged 12, muscular strength. power, cardiovascular endurance; in males aged 13, flexibility showed significant difference. Muscular strength, power, flexibility, muscular endurance, cardiovascular endurance in females aged 11, and flexibility in females aged 14 showed significant difference. As a result, this study concluded that in a period of rapid skeletal growth, evaluating physique and physical fitness based on bone age is more accurate than evaluating based on chronological age.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1627-1642
• /
• 2021

This study aims to evaluate physical fitness according to the bone age of youth, and ultimately provide basic data for balanced development of youth through physical fitness standard indicators according to the bone age. A total of 730 youth aged 11 to 13 years in bone age and 11 to 13 years in chronological age were selected as subjects; and after taking X-ray films to calculate the bone age, they were evaluated by using the TW3 method. A total of 2 components in physique, which were stature and weight, were measured using a stadiometer(Hanebio, Korea, 2021) and Inbody 270(Biospace, Korea, 2019). A total of 7 components in physical fitness were measured as well, which included muscular strength (Hand Grip Strength), balance (Bass Stick Test), agility (Plate Tapping), power (Standing Long Jump), flexibility (Sit&Reach), muscular endurance (Sit-Up), and cardiovascular endurance (Shuttle Run). Descriptive statistics and independent t-test were conducted for data processing using the SPSS PC/Program(Version 26.0), and it was considered significant at the level of p< .05. The results of this study may be summarized as follow. First, the result of comparing the bone age and the chronological age of 11 to 13 years old in physical fitness, males showed significant difference in muscular strength, power, muscular endurance, and cardiovasular endurance. In females, muscular strength, balance, agility, power, flexibility, muscular endurance, and cardiovascular endurance showed significant difference. Second, physical fitness standard indicators were presented for each gender and age (11-13 years old) of youth according to the bone age; and based on this, physical fitness standard indicators, which are basic data for physical fitness evaluation according to the bone age of youth, were presented.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.3
• /
• pp.813-824
• /
• 2024

This study was conducted to evaluate the long-term effects of training on the physical development and exercise performance of adolescent weightlifters, aiming to provide effective training and management strategies for improving competitive performance. In order to achieve the objectives of the study, adolescent weightlifters from middle and high schools in Chungcheongnam-do province [male middle school-aged athletes, n=5; female middle school-aged athletes, n=5; male high school-aged athletes, n=12; female high school-aged athletes, n=8] were examined over approximately 10 months of weightlifting-based training to analyse the changes in body composition, physical fitness (muscular strength, muscular endurance, agility, flexibility, dynamic balance, coordination), and isokinetic muscular function (trunk and lower extremity). As a result, it was found that the physical development of middle and high school-aged athletes underwent physical development primarily characterized by an increase in lean body mass. Additionally, back muscle strength and power, which contribute to rapid and efficient force transmission between the upper and lower body, as well as grip strength necessary for controlling the barbell with a stable grip, are significant factors. These aspects were notably enhanced through specialized training and competitive experience for weightlifting performance at the high school level. On the other hand, changes in factors beyond the primary physical attributes contributing to weightlifting performance were limited, suggesting differences in effectiveness likely stemming from the specific composition of training programs or the athletes' experience and skill levels. Collectively, the findings from this study, which evaluates the physical characteristics and exercise abilities of adolescent weightlifters, are expected to contribute to improved competitive performance of weightlifters.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.14 no.2
• /
• pp.88-93
• /
• 2003

Whether respiratory muscle training is of benefit to the singing students is controversial. The purpose of the study is to investigate pulmonary function and the maximal inspiratory(MIP) and expiratory pressure(MET), and maximum phonation time in five female singing students before and after the specially programmed respiratory muscle training during 2 months. All singing students had average 4.8 years of formal classical voice training. Respiratory muscle training machine (Ultrabreath) was used to train respiratory muscle. Pulmonary function test data on simple pulmonary function, flow volume curve, static lung volumes are obtained from Vmax 6200. The MIP and MEP were measured using Spirovis, and the MPT were measured using hand-held stopwatch. Any pulmonary function test variables are not changed after respiratory muscle training. However, MIP and MEP were significantly increased between before and after respiratory muscle training. MPT increased significantly after training, compared to the pre-trained. MIP, MEP, and MPT after training in female singing students were 26%, 25% and 33% higher than those before training. The result indicated that the specially programmed respiratory muscle training is beneficial to improve respiratory muscle strength and vocal function without an increment in pulmonary function.

• Geotechnical Engineering
• /
• v.12 no.6
• /
• pp.115-126
• /
• 1996

The purpose of 1,his study is to analyze the compression and strength charactefistics of the decomposed -weathered soil originating from biotite gneiss or fine grained gneiss sampled from Poidong, Seoul : to figure out the behavioural characteristics of the decomposed -weathered soil in accordance with mineral composition and origin by comparing experimental results of residual soils. originating from granites and sampled from Bulam, Andong and Kimchun area. A series of CIU, CID CKoV, CKoD tests were car lied out. Although weathered soils have different origin and mineral composition, the slope of the NCL A was similar. It was also shown that plastic strain ratio was about 85% mainly due to the particle crushing effect during compression. The Poidong soil showed strain softening phenomenon unlike the Kimchun and Andong soils. this implies that the behavioural characteristics are affected by the origin and the mineral composition of the soil particles. Moreover, it was found that the angle of the shear resistance$(\phi')$ was dependent on the mineral composition. On the oher hand, measured Af values of decomposed weathered soils were more than one regardless of the origin and the mineral composition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.464-466
• /
• 2009

This study tried to examine the suitability of strip casting process such as PFC (Planar Flow Casting) method for soldering Au-Sn strip. The effect of heat treatment on the tensile behavior and mechanical properties of an Au-Sn strip was investigated through tensile test, micro hardness test, X-ray diffraction (XRD), SEM, and TEM observations. It was apparent that 20-mm width Au-Sn strip could be well produced by using planar flow casting process. Tensile results showed that tensile strength increased from 338.3MPa to 310MPa and plastic strain improved from 0% to 1.5% with heat treatment ($170^{\circ}C$/70 hrs.). The microstructure of Au-Sn strip mainly consisted of two phases; $Au_5Sn(\zeta)$ and AuSn($\sigma$). It was also found that inhomogeneous amorphous local structure continuously changed to the homogeneous two phases microstructure with heat treatment. The fractographical observation after tensile test indicated the cleavage fracture mode of as-casted Au-Sn strip. On the other hand, the heat treated Au-Sn strip showed that fracture propagated along interface between brittle AuSn and ductile $Au_5Sn$ phases. The deformation behavior of strip casted Au-Sn alloy with microstructural evolution and the improve method for ductility of this alloy was also suggested.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1081-1084
• /
• 1995

Internal voids located within an insulation will arise partial discharge that causes local breakdown and even the entire insulation breakdown. For HV apparatuses, it is usual case that several voids are formed within non-uniform electric field condition rather than single void within uniform field, which can be solved analitically. The purpose of this work is to study partial discharge and breakdown characteristics of an insulation according to the distribution pattern of two disc-type voids that are located within non-uniform field. The results from numerical field analysis and experiments show that the electric field within the voids decreases as they are arranged more serially, which accordingly results in the increase of partial discharge inception field(PDIF) much higher than that of single void model. With parallel arranged voids, PDIF is almost the same as that of single void model. On the other hand, AC breakdown strength decreases as voids are arranged more serially, which is a natural result considering the reduction of effective insulation thickness. For parallel voids, this effect cannot he noticed where as they show different pattern compared with single void and serial void models in $\Phi$-Q-N analysis. Considering these results may leads us to the conclusion that, in the evaluation of insulating products through PD test, it is not sufficient to determine only PDIV or existence of PD at predetermined voltage level. We could evaluate more accurately by considering all the available data such as PDIV, PD magnitude, PD occurring phase, number of PD pulses, and etc.

• Journal of Biomedical Engineering Research
• /
• v.33 no.2
• /
• pp.89-97
• /
• 2012

The purpose of this study is to develop the guideline of the physicochemical and mechanical properties evaluation for silicone gel filled breast implants. First of all, the use and development status for silicone gel filled breast implants were investigated, and then, standard and criteria about performance evaluation established by the international organizations such as ASTM, FDA guidance and ISO were examined. To evaluate the mechanical properties, data research and testing for breaking strength, elongation, tensile set, joint intensity, silicone gel cohesion, weight loss from heating, static rupture resistance, impact resistance test, fatigue test, and gel bleed were performed. On the other hand, to evaluate the physicochemical properties, volatile matter, extent of cross linking, heavy metals, and extractable were analyzed. In this study, results for general function, mechanical properties and physicochemical properties were examined and reviewed for the accordance with international standard, and objective and standardized guideline was provided.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.46-54
• /
• 2014

In this study, the effect of bonding temperature and bonding pressure on deformation and tensile properties of diffusion bonded joint of STS304 compact heat exchanger was investigated. The diffusion bonds were prepared at 700, 800 and $900^{\circ}C$ for 30, 60 and 90 min in pressure of 3, 5, and 7 MPa under high vacuum condition. The height deformation of joint decreased and the width deformation of joint increased with increasing bonding pressure at $900^{\circ}C$. The ratio of non-bonded layer and void observed in the joint decreased with increasing bonding temperature and bonding pressure. Three types of the fracture surface were observed after tensile test. The non-bonded layer was observed in diffusion bonded joint preformed at $700^{\circ}C$, the non-bonded layer and void were observed at $800^{\circ}C$. On the other hand, the ductile fracture occurred in diffusion bonded joint preformed at $900^{\circ}C$. Tensile load of joint bonded at $800^{\circ}C$ was proportional to length of bonded layer and tensile load of joint bonded at $900^{\circ}C$ was proportional to minimum width of pattern. The tensile strength of joint was same as base metal.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.138-144
• /
• 1998

To provide further information for reutilization of the bed-logs decayed by oak mushroom(Lentinus edodes), the properties of wood-based board prepared with mixed materials of normal wood and bed-logs were examined. Wood fibers in bed-logs showed different morphology from normal wood fibers, that is, shorter length and rough surface. Thickness swelling increased with increasing mixing ratio of bed-log. On the other hand, modulus of rupture(MOR) in bending strength decreased. In products, the visual surface of board prepared from higher mixing rate of bed-log chips was smooth. Consquently, it is considered that the optimum mixing rate of bed-log to normal wood is the range of 25-50% and the bed-log can be used for raw material of board instead of normal wood.