• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.219-225
• /
• 2014

본 연구에서는 NACA0012/14/15 천음속 에어포일 유동에서 비평형 응축이 충격파 진동에 미치는 영향을 TVD 수치해석을 통하여 연구하였다. 주류 마하수 0.81-0.90에 대해, 정체점 상대습도 및 에어포일의 기하학적 형상이 유동 특성에 미치는 영향이 구명되었다. 받음각 ${\alpha}=0^{\circ}$, 정체점 온도(288K) 및 주류 마하수가 0.87인 경우, 정체점 상대습도의 증가는 Terminating Shock의 충격파 강도를 약화시킨다. 정체점 상대습도가 30%인 경우 961Hz이던 충격파의 진동수가 60%일 때는 912Hz로 약 5% 감소한다. 정체점 상대습도가 동일한 경우는 주류 마하수가 클수록 충격파의 진동수 및 이동거리는 크게 된다. 또, 진동의 한 주기에 대해 항력계수의 변화도 구명되었다. 정체점 상대습도가 높을수록 최대 항력 계수는 작고, 항력계수의 변화폭 또한 감소한다. 한편 에어포일의 최대 두께가 두꺼울수록 초음속 영역의 크기는 증가하며 충격파의 진동수 및 이동거리도 증가한다.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.

• 대한한방부인과학회지
• /
• 제28권2호
• /
• pp.1-14
• /
• 2015

Objectives : This study was designed to investigate the effects of Taraxaci Herba (TH) on cell death in breast cancer cells. Methods : In this experiment, the effects of TH on proliferation rates, cell morphology and growth pattern, intracellular reactive oxygen species (ROS) production. In addition, the effects on nuclear condensation, fragmentation and formation of acidic vesicular organelles (AVO) in MCF-7 cells were also investigated. Finally, autophagy related with protein was observed by using western blot method. Results : TH inhibited proliferation of MCF-7 cells, TH elevated intracellular ROS levels significantly. Treatment with TH did not affect nuclear morphologies such as condensation or fragmentation. On the other hand, TH treatment effectively induced AVO. Finally, one of autophagy related with protein, Microtubule-associated proteins 1A/1B light chain 3A (MAP1LC3A, LC3) level was elevated by treatment with TH. Conclusions : These data indicate that TH is able to be used for patient with breast cancer and mechanisms are involved in autophagy through ROS generation.

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1545-1550
• /
• 2004

meso-Functionalized dipyrromethanes 6-10 were synthesized by acid-catalyzed addition of pyrrole to ${\alpha}$-position of 2-alkenyl pyrroles. The regiochemistry of the reaction can be explained by either the formation of more stable carbocation intermediate or ${\beta}$-addition of ${\alpha},{\beta}$-unsaturated carbonyl compounds. The starting 2-alkenyl pyrroles were synthesized by Aldol condensation of 2-formylpyrrole with active methylene compounds such as nitromethane, diethylmalonate and malononitrile. Attempted ‘2+2' condensation of meso-diethylmalonyldipyrromethane, meso-(p-tolyl)dipyrromethane and p-tolualdehyde afforded three different porphyrins 12, 13 and 14 in reasonable yields. On the other hand, meso-(nitromethyl)dipyrromethane with p-(tbutyl) benzaldehyde resulted in the formation of three different porphyrins such as 5,15-dicyano-10,20-diarylporphyrin (16), 5-cyano-15-formyl-10,20-diarylporphyrin (17) and 5,15-diformyl-10,20-diarylporphyrin (18) in low yields. Conversion of nitromethyl groups to nitrile and (or) formyl group was observed under the porphyrin forming conditions.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.64-69
• /
• 2017

The purpose of this study is to investigate the performance characteristics of seawater cooling system for a fishing vessel. The circulation amount of refrigerant, condensation capacity, evaporation capacity, compression work and coefficient of performance(COP) were analyzed as the heat source temperature changed. The experimental setup consisted of an open-type compressor, a shell&tube type condenser, an evaporator and an expansion valve. The heat source was controlled by a constant temperature chamber. The main results of this study are summarized as follows. The condensation capacity increased with increasing heat source temperature, and it was confirmed that the effect of circulating amount of refrigerant was dominant. The amount of heat for vaporization was almost constant even though the temperature of the heat source increased. On the other hand, the compression power was increased. This is because the compression ratio increases as the condensation pressure, the enthalpy difference between inlet and outlet, the amount of circulating refrigerant increases. The performance coefficient of this system showed a tendency decreasing with increasing heat source temperature. Therefore, the basic data of the seawater cooling system for the maintenance of the catch line of the shore fishing boats was acquired through this study, and it is considered that it will be sufficient for the actual design.

• 한국입자에어로졸학회지
• /
• 제17권3호
• /
• pp.43-54
• /
• 2021

Size distributions of atmospheric particulate matter (PM) and its water-soluble organic and inorganic components were measured between January and February 2021 at an urban site in Gwangju in order to identify the major factors that determine their size distributions. Their size distributions during the study period were mainly divided into two groups. In the first group, PM, NO₃^-, SO₄^2-, NH₄⁺ and water-soluble organic carbon (WSOC) exhibited bi-modal size distributions with a dominant condensation mode at a particle size of 0.32 ㎛. This group was dominated by local production of secondary water-soluble components under atmospheric stagnation and low relative humidity (RH) conditions, rather than long-range transportation of aerosol particles from China. On the other hand, in the second group, they showed tri-modal size distributions with a very pronounced droplet mode at a diameter of 1.0 ㎛. These size distributions were attributable to the local generation and accumulation of secondary aerosol particles under atmospheric conditions such as atmospheric stagnation and high RH, and an increase in the influx of atmospheric aerosol particles by long-distance transportation abroad. Contributions of droplet mode NO₃^-, SO₄^2-, NH₄⁺ and WSOC to fine particles in the second group were significantly higher than those in the first group period. However, their condensation mode contributions were about two-fold higher in the first group than in the second group. The significant difference in the size distribution of the accumulation mode of the WSOC and secondary ionic components between the two groups was due to the influx of aerosol particles with a long residence time by long-distance transport from China and local weather conditions (e.g., RH).

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.13-18
• /
• 2017

물유리는 기존의 silicon alkoxide보다 훨씬 단가가 저렴하여 상업화에 유리하다는 장점을 나타낸다. 물유리 기반 실리카 에어로겔의 제조에서 산 촉매에 의한 중합 과정이 최종 미세 기공구조 특성에 상당한 영향을 끼치는데, 본 연구에서는 이러한 산 촉매의 종류와 양에 대한 물유리 기반 실리카 에어로겔의 비표면적, 기공 크기 분포 등 각 경우에 해당하는 물성 및 그에 따른 차이를 연구하였다. 최종 생성물의 물성을 통해 물유리 기반 실리카 에어로겔은 중합 반응에 관여하는 산 촉매의 종류와 농도, 몰수에 의해 영향을 받고, 특히 산 촉매의 몰수에 의한 영향이 몰 농도에 의한 영향보다 크게 작용함을 확인하였다. 기존 방식으로 4M 염산 촉매를 첨가할 경우 비표면적이 $394m^2/g$, 기공의 부피가 2.20 cc/g, 평균 기공 지름이 22.3 nm이며 기공률이 92.53%인 실리카 에어로겔을 합성할 수 있었다. 반면 4M의 황산 촉매를 적정량의 몰수인 73 mmol로 투입하여 최종 물유리 기반 실리카 에어로겔을 제조할 경우 비표면적은 $516m^2/g$, 기공의 부피는 3.10 cc/g, 평균 기공 지름은 24.1 nm, 기공률은 96.1%로, 기존의 산 촉매를 투입하여 만든 물유리 기반 실리카 에어로겔보다 전반적으로 기공구조의 특성이 향상됨을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권5호
• /
• pp.47-54
• /
• 1991

The lip seals widely used nowadays in stern tube sealing system of ships have radial sealing contact with shafts or liners, on the other hand the face seals of stern tube sealing system have axial sealing contact with seat. Because of axial sealing contact, the face seals have a large number of merits such as durability of life, simplicity of structure, easy fitting and replacement, etc. In this paper, for the purpose of development of face seals, the fundamental properties of axial sealing contact were analyzed and a trial face seal was designed and manufactured using N.B.R. rubber and Thordon which is widely used for bearing materials. The seal proper of trial face seal was made from N.B.R. rubber and the face insert was made from Thordon, thermosetting resins which are three dimensional, cross linked condensation polylmers. The performance test of trial face seal was carried out on the test bench which was specially designed and manufactured. The results were satisfactory enough to be used in practical stern tube sealing system.

• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.421-426
• /
• 2007

A linking ligand containing sulfur donor atoms in the terminal thiophene rings, 1,2-bis(thiophen-2-ylmethylene) hydrazine (L), was prepared by Schiff-base condensation. Ligand L reacted with [PdCl2(NCPh)2] to produce a molecular Pd compound [PdL2Cl2] (1). On the other hand, it reacted with AgNO3 and AgClO4 to produce a 2-D network [AgL0.5(NO3)] (2) and a 1-D polymer [AgL]ClO4 (3), respectively, whose structures are based on secondary intermolecular forces such as H-bonding, van der Waals interaction, and π-π stacking. Polymer 2 exhibited photoluminescence at room temperature in the solid state.

• Bulletin of the Korean Chemical Society
• /
• 제8권6호
• /
• pp.476-479
• /
• 1987

The macrocyclic nickel complex of the molecular formula[Ni($C_{32}H_{26}N_4$)] has been synthesized from the template condensation reaction between 1-benzoylacetone and o-phenylenediamine in the presence of nickel acetate. Protonation and deuterium exchange reactions of the demetallated macrocyclic ligand and the nickel complex have been carried out. The infrared, electronic and proton magnetic resonance spectral data of both compounds are compared and discussed; protonation of the macrocyclic ligand take place at the nitrogen atoms and all the amine protons undergo very rapid deuterium exchange while the methine protons undergo very slow exchange. On the other hand, protonation of the nickel complex occurs at the nitrogen atoms and only amine protons undergo rapid deuterium exchange. Protonation and deprotonation of the nickel complexes proceed reversibly.