• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.65-69
• /
• 1990

The nucleophilic substitution reactions of naphthalene-1,5-disulfonyl chloride and 4-fluorosulfonylbenzenesulfonyl chloride with p-substituted anilines and methyl substituted pyridines in methanol-acetonitrile mixtures and hydrolyses of those disulfonyl halides have been studied by means of conductometric and polarographic methods. A large difference in the selective parameter, ${\rho}_N$ between mono-sulfonyl chloride and disulfonyl halide can be taken as an evidence that the second $SO_2Cl$ grolup of naphthalene-1,5-disulfonyl chloride also takes part in the reaction in contrast to sulfonyl fluoride in 4-fluorosulfonylbenzenesulfonyl chloride, which only acts as a substituent in the nucleophilic substitution reaction.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.528-533
• /
• 1995

Metallic iridium and rhodium powders prepared from the reactions of [M(COD)(PhCN)2]ClO4 (M=Ir(1), Rh(2); COD=1,5-cyclooctadiene) with hydrogen at room temperature in methylene chloride show catalytic activities for hydrogenation of arenes at room temperature under atmospheric pressure of hydrogen. Most substituents (CH3, COOH, NO2, CH2OH, CHO, OPh, OCH3, C=C, halogens and CH2Cl) on aromatic ring suppress the rate of the hydrogenation of the aromatic ring while the aromatic ring hydrogenation of phenol and 1,4-dihydroxobenzene is faster than that of benzene over these metallic powders. Hydrogenation of benzoic acid occurs only at the aromatic ring leaving the COOH group intact over iridium metal powders while benzoic acid is not hydrogenated at all over rhodium metal powders. Carbonyl, nitro, acetylenic and olefinic groups on an aromatic ring are hydrogenated prior to the aromatic ring hydrogenation. Hydrogenolysis of OH groups of phenol, benzyl alcohol and 1,4-dihydroxobenzene, and hydrodehalogenation of halobenzenes, benzyl halides and cinnamyl chloride also occur along with the hydrogenation of aromatic ring.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.636-642
• /
• 1992

Preferential solvation (PS) phenomena of solutes based on solvent polarity, $E_T$ and AN, were studied by UV/vis. and NMR spectra in MeOH binary mixtures. According to the extent of solvent-solvent interaction, different solvation phenomena were found. PS concept was applied to explain the reactivity of tert-butyl halides solvolysis. The findings of solvation phenomena have been related to the rate of solvolysis and PS suggested as a reason for the solvent dependence of the rates of reaction. Moreover, we found that the results of principal components analysis using six parameters are in good accordance with the results of PS phenomena in mixed methanol systems.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.244.2-244.2
• /
• 2003

For the development of new synthetic method for unnatural amino acid esters, alkyl ${\alpha}$-anilinophenylacetates were synthesized through base-catalyzed hydrolysis of 1,5-diphenylhydantoins in methanol and O-alkylation of sodium ${\alpha}$-anilinophenylacetate with alkyl halides in DMF. Even though hydrolysis of hydantoin ring was undertaken under about 30-40$^{\circ}C$ in methanol, the hydantoic acid sodium salt was continuously converted to the sodium ${\alpha}$-anilinophenylacetate. (omitted)

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.198-205
• /
• 2007

The initial stages of electrochemical oxidative CuI film formation on Cu(111), as studied by means of Cyclic Voltammetry (CV), in-situ Scanning Tunneling Microscopy (STM) and ex-situ Synchrotron X-ray Photoemission Spectroscopy (SXPS), indicate a significant acceleration of copper oxidation in the presence of iodide anions in the electrolyte. A surface confined supersaturation with mobile CuI monomers first leads to the formation of a 2D-CuI film via nucleation and growth of a Cu/I-bilayer on-top of a pre-adsorbed iodide monolayer. Structurally, this 2D-CuI film is closely related to the (111) plane of crystalline CuI (zinc blende type). Interestingly, this film causes no significant passivation of the copper surface. In an advanced stage of copper dissolution a transition from the 2D- to a 3D-CuI growth mode can be observed.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1209-1214
• /
• 2010

Reactions of 2-methyl-2-chloroadamantane (1) in a variety of pure and binary solvents have been studied at various temperatures and pressures up to 80 MPa. The sensitivity (m) to changes in solvent ionizing power of the Grunwald-Winstein equation, and the activation volume (${\Delta}V^{\ddag}$) are calculated from the specific rates. An excellent linear relationship (R = 0.997) for 1, log (k/$k_0$) = $0.80Y_{Cl}$ + 0.11, and the activation volume, ${\Delta}V^{\ddag}$ = -15.2 ~ -10.2 $mL{\cdot}mol^{-1}$ were observed. These values are similar to those for solvolyses of 1-adamantyl halides over the full range of solvents, suggesting that the unimolecular mechanism involving ion pairs is rate-determining. These observations are also compared with those previously reported for the corresponding 1-adamantyl derivatives and chloroformate esters.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.886-892
• /
• 2006

The interaction between tetraethylammonium chloride (TEACl) with ICl and tetraethylammonium iodide (TEAI) and aza-15-crown-5 (A15C5) with $I_2$ and ICl have been examined spectrophotometrically in acetonitrile solution. The results of TEACl-ICl indicate the formation of $ICl_2$ - through equilibrium reaction. In the case of TEAI-$I_2$ and A15C5-$I_2$, the equilibrium formation of $I_3$ - is confirmed. The interaction of TEAI-ICl begins with the simultaneous production of $I_2$ and IC$I_2$ - (at TEAI/ICl < 0.5) as well as continues with the simultaneous consumption of $I_2$ and formation of I$I_3$ - (at TEAI/ICl > 0.5). Similar behavior is also observed for A15C5-ICl system. However, the changes are seen at A15C5/ICl mole ratios less and more than 0.66. Several equations have been suggested for the formation of detected species. The formation constants of various reactions were evaluated from the computer fitting of the absorbance-mole ratio data. IR spectra of A15C5 and 1:1 A15C5:ICl or A15C5:$I_2$ complexes are compared and the effect of complexation on absorption bands is discussed.

• 대한화학회지
• /
• 제28권2호
• /
• pp.86-94
• /
• 1984

${\beta}-Ag_3SI$의 단결정을 만들어 막전극으로의 응용을 살펴보았다. 그 결과 할로겐 이온들에 대해 감응함을 알았고, 분리용액법과 혼합용액법으로 할로겐 이온들에 대한 선택계수를 얻어 이론값과 비교검토 하였으며, 전위시간 곡선으로 부터 이 전극이 유리 전극기구에 의해 전도함을 알았고, 넓은 pH 범위에서 전위가 일정한 값을 가짐을 알았다. 한편 분석화학에의 응용을 살펴 본 결과 할로겐이온의 혼합용액에서 좋은 지시전극으로 사용할 수 있음을 알았다

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.347.2-347.2
• /
• 2016

Recently, in order to improve the performance of the colloidal quantum dot solar cells (CQDSCs), various efforts such as the modification of the cell architecture and surface treatment for quantum dot (QD) passivation have been made. Especially, the incorporation of halides into the QD matrix was reported to improve the performances significantly via passivating QD trap states that lower the life-time of the minority-carrier. In this work, we fabricated a lead sulfide (PbS) QD bilayer treated with different ligands and utilized it as a photoactive layer of the CQDSCs. The bottom and top PbS layer was treated using metal iodide ($MI_x$ and butanedithiol (BuDT), respectively. All the depositions and ligand treatments were carried out in air using layer-by-layer spin-coating process. The fabrication of the active layers as well as the n-type zinc oxide (ZnO) layer was successfully carried out on the bendable indium-tin-oxide (ITO)-coated polyethylene terephthalate (PET) substrate, which implies that this technique can be applied to the fabrication of flexible and/or wearable solar cells. The power conversion efficiency (PCE) of the CQDSCs with the architecture of $PET/ITO/ZnO/PbS-MI_x/PbS-BuDT/MoO_x/Ag$ reached 4.2 %, which is significantly larger than that of the cells with single QD (PbS-BuDT) layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.715-718
• /
• 2004

Substantially improved methods for the preparation of europium-doped yttrium oxide red phosphor with the inclusion of alkali metal halides having a general formula $(Y_{1-x}Eu_x)_2O_3$:MX where 0.025${\leq}$x${\leq}$0.2 and MX is alkali halide in the mole ratio 0.025 to 0.6, more preferably between 0.05 to 0.2 mole, are reported. Another series of the red phosphor materials with general formula $(Y_{1-x-y}Gd_xEu_y)_2O_3$:MX where 0.05${\leq}$x${\leq}$0.40 and 0.025${\leq}$y${\leq}$0.20 and MX is alkali halide in the mole ratio 0.025 to 0.5, more preferably between 0.1 to 0.2 mole, has also been presented. The inclusion of alkali halide greatly increase the luminance of the materials. The materials are very soft with fine particle size less than 100nm. The phosphorescent materials have good luminance in VUV region.