• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.87-100
• /
• 2003

This study was conducted in order to determine a proper level of molasses addition through the analysis of changes in appearance, nutritive and silage parameters before and after ensiling or deepstacking of broiler litter, to evaluate the effect of pelleting processed broiler litter and to develop methods to enhance palatability of broiler litter and reduce the adjustment period by ‘Hanwoo’ steers. Molasses addition was effective in ensiling and deepstacking of broiler litter and the proper addition level was about 5%. Changes in nutritive values of broiler litter by ensiling and deepstacking with or without molasses treatment were not great. Adding 5% molasses at deepstacking of broiler litter did not affect(P<0.05) in vitro digestion of dry matter and organic matter. Pelleting of broiler litter resulted in significant(P<0.05) moisture evaporation, organic matter reduction and nearly threefold increase of bulk density. Pelleting or molasses addition of broiler litter improved palatability by ‘Hanwoo’ steers and reduced the adjustment period by half(8-9 d).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• Korean System Dynamics Review
• /
• v.1 no.2
• /
• pp.5-31
• /
• 2000

The summit meeting of the South North Korean leaders was a turning point in the relationships between the two countries. It was followed by the Red-Cross Meeting, Minister-Level Meeting, economic agreements, which have increased the relationship more colorful in both quantities and qualities. However, the half-century period for separation was too long to overcome all the problems by only one event. The two countries have quite different social systems; one politically strong person is governing the North, while many interest groups are involved in political decision making processes in the South. In short, it would take a long time to settle down all the problems residing between the two countries. A system dynamics model is developed to describe the long term dynamics of the relations between the South and North Koreas. As a first attempt, the model focuses only on the diplomatic meeting issues between the South and North. The model aggregates diplomatic issues into 5 categories; economic issues, security issues, infrastructure, cultural issues, and past problems. It assumes that there would not be any dramatic changes between the two countries. It is a conceptual model composed of around 200 variables, and should not be used as a forecast tool. However, it captures most of the logics discussed in the papers and conferences concerning the South and North Korea relations. Many sensitivity studies and Monte Carlo simulations have shown that the simulation results matches with mental models of experts; that is the model can be used as a learning tool or as a secondary opinion until the data required by the model is collected. In order to analyze the current situation, five scenarios are simulated and analyzed; the functional approach, the conditional approach, the balanced approach, the circumstantial approach, and the strategic approach. The functional approach represents that the South makes efforts in the area where the possibility of agreement is high for the next 10 years. The conditional approach is a scenario where the South impose all difficult issues as conditions for resolving other diplomatic issues. The balanced approach is resolving the five issues with the same priorities, while the circumstantial approach is resolving issues which seem to be resolved easily. Finally, another optimum approach has been seek using the system dynamics model developed. The optimum strategy (it is named as the strategic approach) was strikingly different from other four approaches. The optimum strategy is so complicated that no one could find it with mental model(or by just insights). Considering that the system dynamic model used to find the optimum is a simplifind (maybe over simplified) version of the reality, it is concluded that a well designed system dynamics model would be of great help to resolving the complicated diplomatic problems in any kind.

• Journal of Science Education
• /
• v.39 no.1
• /
• pp.58-79
• /
• 2015

This study is to analyze the 2289 students questionnaires from 3rd to 9th grade students in order to analyze the students' perceptions change aspect by their grade about the frequency and type of students' question during various science class context. After the class contexts proposed in the questionnaire subcategorize into 19 subitems about 4 areas of class content, class pattern, class material and class process, this study examined the frequency and type of students' question during a science class by each item. The results of this study were as follows. First, the type of students' question was that the most frequent was understanding question and the second was memory question and these both types were half frequency. There was no special tendency related the change of students' question type by school year. Second, the frequency of 4th grade students' question was the highest among other school year students and the frequency of students' question was lowered by the higher school year. The change of students' question by school year was the biggest between 3rd and 4th grade. The class strategies for improving the class effect reflect that the various and active students' question by class context and school year stimulates students' thinking and also builds up the active class environment.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.542-547
• /
• 1998

Polyamine type polymer flocculants were synthesized and their characterization, viscosity and flocculation studies were conducted. In order to increase the molecular weight of polyamine flocculant which was prepared by polycondensation reaction from dimethylamine and epichlorohydrin, a small amount of 1,6-hexanediamine was employed. The incorporation of 1,6-hexanediamine up to 5.5 mole % replacing corresponding part of dimethylamine gave a branched type polyamine sample with increased intrinsic viscosity ([${\eta}$]=0.46 in 1 wt % aqueous NaCl solution). The amount of 1,6-hexanediamine above 5.5 mole %, however, resulted in gelation during polymerization. Utilizing raw water from Maegok potable water treatment plant, it was found that the addition of polyamine flocculant at a concentration of 1 mg/L level could reduce the amount of polyaluminum chloride (PAC) inorganic flocculant by half (15 mg/L). It was also observed that the incoporation of polyamine flocculant at 1 mg/L level was effective in the higher pH raw water, while PAC inorganic flocculating agent alone was not effective.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.117-125
• /
• 2017

The role of fly ash in concrete become impotent with finding the characteristics of fly ash in which it is used as cement replacement material. In this paper, corrosion test results obtained by two test methods such as the long-term exposure corrosion test and the accelerated corrosion test method, were compared to investigated the corrosion resistance between fly ash concrete and normal concrete. Corrosion initiation time was measured in two types of concrete, i.e., one mixed with fly ash(FA) and the other without admixture(OPC). The accelerated corrosion test was carried out by four case, i.e., two samples is a cyclic drying-wetting method combined without carbonation(case 1) and combined with carbonation(case 2), and the other two samples is a artificial seawater ponding test method combined without carbonation(case 3) and combined with carbonation(case 4). Whether corrosion occurs, it was measures using half-cell potential method. The ponding test combined without carbonation was most effective in accelerating corrosion time of steel bars. The results indicated that the corrosion of rebar embedded in concrete occurred according to the order of OPC, FA. The delay relative ratio of corrosion obtained by corrosion initiation time between FA and OPC is 1.04 to 1.27. Consequently, fly ash concrete as the age increases its corrosion resistance was improved compared with OPC concrete.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.865-870
• /
• 1990

Four different fermentation methods of Korean cucumber pickles were compared with conventional method, pickling in 10% NaCl solution at $25^{\circ}C$, in order to improve the storage stability. The methods studied were brining the cucumbers in hot($90^{\circ}C$) 10% NaCl solution(method A), addition of KCl and $CaCl_2$ into the hot salt solution(method B) addition of a sodium salts mixture of phosphates, nitrite and citrate into half fermented pickles prepared by method B(method C), substituted nitrite and citrate with KCl in method C(method D). It was found from results that the method C and D reduced the decreasing rate of pH very significantly by more than 3 fold and method B also showed the reducing effect. However, higher total acidity was measured for method C and D, which was opposite to pH results. Changes in hardness of cucumber showed little difference to control while color of brining solution exhibited some difference in their Hunter values. Organoleptic comparison showed a clear effect of salts mixtures by receiving the significant higher scores in fresh cucumber flavor and lower values in yeast moldy and sour flavor for method C and D when those were compared to control.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.13-24
• /
• 2014

A series of trapdoor model tests was systematically performed in order to investigate soil arching. The mobilized soil arching was clearly observed by change of the vertical earth pressure loaded on trapdoor of soil container box. A slow decent of the loading plate at the trapdoor results in loosening zone over the trapdoor and the stress in this loosening zone was transferred to the stationary zone in the vicinity of the trapdoor. In particular, it was observed that the vertical earth pressure rapidly decreased in the loosening zone and increased in the stationary zone at the trapdoor. Both the maximum decreasing rate of the vertical earth pressure in the loosening zone and the increasing rate of the vertical earth pressure in the stationary zone were not influenced by the ground density, but affected by the size of the trapdoor. The loosening zone could be defined by the elliptical configuration, in which the major axis was twice as long as the height of the loosening zone at the center of trapdoor and the minor axis was the same as the width of trapdoor. The height of loosening zone at the center of trapdoor was one and a half times as long as the width of trapdoor loading plate.

• Journal of Radiation Protection and Research
• /
• v.14 no.1
• /
• pp.16-23
• /
• 1989

To obtain the basic data for protective roles and first-aid of radiation hazard, the present studies were carried out to evaluate the decontamination of radiostrontium by the First-Aid drugs. Each mouse was administered intraperitoneally dose of sodium alginate 5mg, $CaNa_3DTPA$ 8.4mg and saline 5ml following the internal contamination with 1 $\mu$Ci of strontium as $^{85}SrCl_2$. $^{85}Sr$ was determined by the radioactivity of body burden, urinary excretion, fecal excretion and organ distribution by Ge-detector and MCA. The results are summarized as follows. 1. Effective half life on whole body retention $^{85}Sr$ was determined at 33 hours. 2. The decontamination effect of First-Aid durgs on the body $^{85}Sr$ burden were increased $CaNa_3DTPA$ (4.7 times), sodium alginate (1.7 times) and saline (2.4 times) respectively. 3. Strontium were excreted through urine (35.4%), feces (64.4%) and other (0.2%). But on the $^{85}Sr$ excretion routes following First-Aid drugs treatment, strontium-85 mainly were excreted through urine after $CaNa_3DTPA$ and saline treatment, and was excreted through feces after sodium alginate treatment. 4. The organ distribution of strontium-85 is vertebra, femur, sternum and liver in order Finally, the extrapolations from these data to victims were suggested that the rapid administration of $CaNa_3DTPA$, sodium alginate and saline simultaneously were markedly increased the decontamination effects on the internal contamination of radiostrontium.

• Tuberculosis and Respiratory Diseases
• /
• v.72 no.5
• /
• pp.433-440
• /
• 2012

Background: The pulmonary function test is the most basic test method to diagnosis lung disease. The purpose of this study was to research the correlation of the body mass index (BMI), the fat percentage of the body mass (fat%), the muscle mass, the fat-free mass (FFM) and the fat-free mass index (FFMI), waist-hip ratio (WHR), on the forced expiratory volume curve. Methods: Between March and April 2009, a total of 291 subjects were enrolled. There were 152 men and 139 female (mean age, $46.3{\pm}9.92$ years), and they were measured for the following: forced vital capacity (FVC), forced expiratory volume at 1 second ($FEV_1$), and forced expiratory flow during the middle half of the FVC ($FEF_{25-75}$) from the forced expiratory volume curve by the spirometry, and the body composition by the bioelectrical impedance method. Correlation and a multiple linear regression, between the body composition and pulmonary function, were used. Results: BMI and fat% had no correlation with FVC, $FEV_1$ in male, but FFMI showed a positive correlation. In contrast, BMI and fat% had correlation with FVC, $FEV_1$ in female, but FFMI showed no correlation. Both male and female, FVC and $FEV_1$ had a negative correlation with WHR (male, FVC r=-0.327, $FEV_1$ r=-0.36; p<0.05; female, FVC r=-0.175, $FEV_1$ r=-0.213; p<0.05). In a multiple linear regression of considering the body composition of the total group, FVC explained FFM, BMI, and FFMI in order ($r^2$=0.579, 0.657, 0.663). $FEV_1$ was explained only fat% ($r^2$=0.011), and $FEF_{25-75}$ was explained muscle mass, FFMI, FFM ($r^2$=0.126, 0.138, 0.148). Conclusion: The BMI, fat%, muscle mass, FFM, FFMI, WHR have significant association with pulmonary function but $r^2$ (adjusted coefficient of determination) were not high enough for explaining lung function.