• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1749-1753
• /
• 2003

We proposed several systems for 1Giga bit Modem. The first, Binary ASK(Amplitude Shift Keying) system has a high speed shutter transmitter and no IF(Intermediate Frequency) receiver only by symbol synchronization. The advantage of proposed system is that circuitry is very simple without IF process. The disadvantage of proposed system are that line spectrum occurs interference to other channels, and enhancement to 4-level system is impossible due to its large SNR degradation. The second, Binary phase modulation system has a high speed shutter transmitter and IF-VCO(IF-Voltage Controlled Oscillator) control by base-band phase rotation. Polarity of shutter window is changed by the binary data. The window should be narrow same as above ASK. The advantage of proposed system is which error rate performance is superior. The disadvantage of proposed system are that Circuitry is more complex, narrow pull-in range of receiver caused by VCO and spectrum divergence by the non-linear amplifier. The third, 4-QAM(Quadrature Amplitude Modulation)system has a nyquist pulse transmitter and IF-VCO control by symbol clock. The advantage of proposed system are that signal frequency band is a half of 1GHz, reliable pull-in of VCO and possibility of double speed transmission(2Gbps) by keeping 1GHz frequency-band. The disadvantage of proposed system are that circuit complexity of pulse shaping and spectrum divergence by the non-linear amplifier.

• 정보처리학회논문지C
• /
• 제17C권3호
• /
• pp.233-242
• /
• 2010

전력분석 공격이 소개되면서 다양한 대응법들이 제안되었고 그러한 대응법들 중 블록 암호의 경우, 암/복호화의 연산 도중 중간 값이 전력 측정에 의해 드러나지 않도록 하는 마스킹 기법이 잘 알려져 있다. SEED는 비선형 연산으로 32 비트 덧셈 연산과 S-box 연산을 동시에 사용하고 각 연산에 대한 마스킹 방법이 조화를 이룰 수 있도록 마스킹 형태 변환 과정이 필요하다. 본 논문에서는 SEED의 구조적 특성을 고려하여, 연산 시간이 많이 필요한 마스킹 형태 변환 횟수를 최소화 하도록 새로운 마스킹 S-box 설계법을 제안한다. 또한 마스킹 S-box 테이블을 하나만 생성하고 이것으로 나머지 마스킹 S-box 연산을 대체할 수 있는 연산식을 만들어 기존 마스킹 기법에 비해 마스킹 S-box로 인한 RAM 사용량을 절반으로 줄여 메모리 크기면에서도 효율적이도록 구성하였다.

• 한국항행학회논문지
• /
• 제20권1호
• /
• pp.53-58
• /
• 2016

우리는 본 논문에서 이차 칼만 필터를 이용한 영상 기반 객체 추적분야의 새로운 알고리즘을 제안한다. 최근에 발표된 이차 칼만 필터는 영상 기반의 객체의 실제 3차원 공간의 위치를 추적하는 것에는 아직 적용되지 않았다. 2차원 영상 내의 위치를 3차원 공간상의 위치로 환원시키는 것은 비선형적 변환을 수반하기 때문에 그에 맞는 추적 알고리즘을 사용해야만 한다. 이러한 상황에서, 비선형 수식을 이차식으로 근사화하는 이차 칼만 필터가 선형으로 근사화하는 확장 칼만 필터보다 더 정확한 성능을 낼 수 있다. 우리는 동일한 상황을 가정하여 확장 칼만 필터, 무향 칼만 필터, 파티클 필터, 그리고 우리가 제안한 이차 칼만 필터를 이용하여 객체를 추적하고, 그 결과를 비교해 본다. 결론적으로 이차 칼만 필터가 발산율이 확장 칼만 필터에 비해 거의 절반가량 감소하며, 추적 정확도 측면에서 무향 칼만 필터에 비해 1% 가량 우수한 성능을 나타낸다.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.443-449
• /
• 2017

Taking high geothermal tunnels as background, the deformation of concrete for shotcrete use was studied by simulating hot-humid and hot-dry environments in a laboratory. The research is made up by two parts, one is the influence of two kinds of high geothermal environments on the deformation of shotcrete, and the other is the shrinkage inhibited effect of fiber materials (steel fibers, polypropylene fibers, and the mixture of both) on the concrete in hot-dry environments. The research results show that: (1) in hot and humid environments, wet expansion and thermal expansion happened on concrete, but the deformation is smooth throughout the whole curing age. (2) In hot and dry environments, the concrete suffers from shrinkage. The deformation obeys linear relationship with the natural logarithm of curing age in the first 28 days, and it becomes stable after the $28^{th}$ day. (3) The shrinkage of concrete in a hot and dry environment can be inhibited by adding fiber materials especially steel fibers, and it also obeys linear relationship with the natural logarithm of curing age before it becomes stable. However, compared with no-fiber condition, it takes 14 days, half of 28 days, to make the shrinkage become stable, and the shrinkage ratio of concrete at 180-day age decreases by 63.2% as well. (4) According to submicroscopic and microscopic analysis, there is great bond strength at the interface between steel fiber and concrete. The fiber meshes are formed in concrete by disorderly distributed fibers, which not only can effectively restrain the shrinkage, but also prevent the micro and macro cracks from extending.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권17호
• /
• pp.7795-7801
• /
• 2015

The aim of the present research was to establish primary characteristics of electron beams for a Varian 2100C/D linear accelerator with recently developed PRIMO Monte Carlo software and to verify relations between electron energy and dose distribution. To maintain conformity of simulated and measured dose curves within 1%/1mm, mean energy, Full Width at Half Maximum (FWHM) of energy and focal spot FWHM of initial beam were changed iteratively. Mean and most probable energies were extracted from validated phase spaces and compared with related empirical equation results. To explain the importance of correct estimation of primary energy on a clinical case, computed tomography images of a thorax phantom were imported in PRIMO. Dose distributions and dose volume histogram (DVH) curves were compared between validated and artificial cases with overestimated energy. Initial mean energies were obtained of 6.68, 9.73, 13.2 and 16.4 MeV for 6, 9, 12 and 15 nominal energies, respectively. Energy FWHM reduced with increase in energy. Three mm focal spot FWHM for 9 MeV and 4 mm for other energies made proper matches of simulated and measured profiles. In addition, the maximum difference of calculated mean electrons energy at the phantom surface with empirical equation was 2.2 percent. Finally, clear differences in DVH curves of validated and artificial energy were observed as heterogeneity indexes were 0.15 for 7.21 MeV and 0.25 for 6.68 MeV. The Monte Carlo model presented in PRIMO for Varian 2100 CD was precisely validated. IAEA polynomial equations estimated mean energy more accurately than a known linear one. Small displacement of R50 changed DVH curves and homogeneity indexes. PRIMO is a user-friendly software which has suitable capabilities to calculate dose distribution in water phantoms or computerized tomographic volumes accurately.

• 센서학회지
• /
• 제25권2호
• /
• pp.124-130
• /
• 2016

NDIR $CO_2$ gas sensor was built with ASIC implemented thermopile sensor which included temperature sensor and unique elliptical waveguide structures in this paper. The temperature dependency of dual infrared sensor module ($CO_2$ and reference IR sensors) has been characterized and its output voltage characteristics according to the temperature and gas concentration were proposed for the first time. NDIR $CO_2$ gas and reference IR sensors showed linear output voltages according to the variation of ambient temperatures from 243 K to 333 K and their slopes were 14.2 mV/K and 8.8 mV/K, respectively. The output voltages of temperature sensor also presented a linear dependency according to the ambient temperature and could be described with V(T)=-3.191+0.0148T(V). The output voltage ratio between $CO_2$ and reference IR sensors revealed irrelevant to the changes of ambient temperatures and gave a constant value around 1.6255 with standard deviation 0.008 at 0 ppm. The output voltage of $CO_2$ gas sensor at zero ppm $CO_2$ gas consisted of two components; one is caused by the HPB (half pass-band) of IR filter and the other is attributed to the part of $CO_2$ absorption wavelength. The characteristics of output voltages of $CO_2$ gas sensor could be accurately modeled with three parameters which are dependent upon the ambient temperatures and represented small average error less than 1.5% with 5% standard deviation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권6호
• /
• pp.784-788
• /
• 2008

Studies to detect genes responsible for economic traits in farm animals have been performed using parametric linear models. A non-parametric, model-free approach using the 'expanded multifactor-dimensionality reduction (MDR) method' considering high dimensionalities of interaction effects between multiple single nucleotide polymorphisms (SNPs), was applied to identify interaction effects of SNPs responsible for carcass traits in a Hanwoo beef cattle population. Data were obtained from the Hanwoo Improvement Center, National Agricultural Cooperation Federation, Korea, and comprised 299 steers from 16 paternal half-sib proven sires that were delivered in Namwon or Daegwanryong livestock testing stations between spring of 2002 and fall of 2003. For each steer at approximately 722 days of age, the Longssimus dorsi muscle area (LMA) was measured after slaughter. Three functional SNPs (19_1, 18_4, 28_2) near the microsatellite marker ILSTS035 on BTA6, around which the QTL for meat quality were previously detected, were assessed. Application of the expanded MDR method revealed the best model with an interaction effect between the SNPs 19_1 and 28_2, while only one main effect of SNP19_1 was statistically significant for LMA (p<0.01) under a general linear mixed model. Our results suggest that the expanded MDR method better identifies interaction effects between multiple genes that are related to polygenic traits, and that the method is an alternative to the current model choices to find associations of multiple functional SNPs and/or their interaction effects with economic traits in livestock populations.

• 농촌계획
• /
• 제19권1호
• /
• pp.23-32
• /
• 2013

In the traditional subsistence farming era in Korea, most of small farmer's housing plots in the rural villages had their boundary barriers of which materials being the natural ones provided from nearby places. However, during the rapid industrialization period from 1960s, a traditional type of boundary barriers in the rural villages had been replaced mostly by low-cost factory-made ones, which means absolute loss of their amenity values as a linear part of villagescape. In spite of many study efforts on boundary barriers of traditional rural houses, detailed historical dating on them after 1960s have not tried up to now, which provoked to try this study. Through the direct and in-depth interviews to rural villagers sampled from 21 case villages, it was found that original boundary barriers structure in most of farm houses was made of natural materials like stone, soil, trees and bamboo, but, replaced by cement block structures mostly during Saemaeul Project period. However, although being relatively minority, traditional ones have been preserved up to now mainly in remote mountainous and seashore villages, but was in very low condition. In the overall view, for more than half a century, boundary barriers of farm houses had been left without public or private improvement efforts. In order to enhance their amenity values, more research works should be carried out on positive reassessment of the traditional ones harmonized with multifunctionalities for modern village life.

• 한국작물학회지
• /
• 제50권1호
• /
• pp.32-38
• /
• 2005

A long-term study initiated in 1989 at San-born Field, Columbia, Missouri, was designed to evaluate the affect of environmental factors, nitrogen application, and crop rotation on soybean (Glycine max [L.] Merr.) seed composition. Soybeans were grown as part of a four- year rotation which included corn (Zea maize L.), wheat (Triticum aestivum L.), and red clover (Trifolium pratense L.). Results from soil tests made prior to initiation of the study and subsequently every five years, were used to calculate application rates of nitrogen, phosphorus, and potassium necessary for target yield of pursuant crops. In the experimental design, nitrogen was applied to one-half of the plot on which the non-leguminous crop, either corn or wheat was grown. Analysis of soybean seed by near infrared reflectance spectroscopy collected over an 11-year period revealed a linear increase in protein and decrease in oil content. Application of nitrogen fertilizer to non-leguminous crops did not have an apparent effect on total protein or oil content of subsequent soybean crop. Analysis of soybean seed proteins by sodium dodecyl sulfate polyacrylamide gel electrophoresis in conjunction with computer­assisted densitometry revealed subtle changes in the accumulation of seed proteins. Immunoblot analysis using antibodies raised against the $\beta-subunit$ of $\beta-conglycinin$ showed a gradual increase in the accumulation of the 7S components during successive years of the experiment. A linear increase in temperature and decrease in rainfall was observed from the onset of data· collection. Higher temperatures during the growing season have been linked to increased protein and diminished oil content of soybean, thus changes observed in this study are possibly related to climatic conditions. However, crop rotation and subsequent changes in soil ecology may contribute to these observed changes in the seed composition.

• Journal of Periodontal and Implant Science
• /
• 제24권1호
• /
• pp.165-177
• /
• 1994

To investigate the depth of the root concavity and root surface area of the maxillary first premolar, 40 maxillary first premolars were used. All the teeth which extracted because of advanced periodontal disease and orthodontic treatment procedure, were sectioned every 1.5mm from cementoenameljunction to the apex with hard tissue microtome. Each sectioned root was taken photograph with slide film, and projected for measuring with a calibrated digital Curvi-Meter. The root surface area, percentage of the RSA and the linear variation of the RSA were calibrated for each 1.5mm section. Linear variation of the depth of root concavity was measured on mesial and distal root surface for each section using computer-aided digitizer. The results were as follows. 1. The total mean root length of maxillary first premolar was 13.48mm. Mean buccal root length of 2-rooted tooth was 12.59mm, mean palatal root length was 12.73mm, and mean root length of single rooted tooth was 13.78mm. 2. The total mean root surface area of maxillary first premolar was $194.17mm^2$, mean root surface area for 2-rooted tooth was $205.97mm^2$ and mean root surface area for single rooted tooth was $188.49mm^2$. 3. It was 59.93% of the total root surface area that the area from CEJ to coronal 6mm. And, the coronal half of the root length accounted for approximately 71.76% of the total root surface area. 4. Most deepest concavity of the mesial root surface was 0.65mm at apical 3.0mm, 4.5mm level in maxillary first premolar. And, that of the distal root surface was 0.37mm at apical 4.5mm level. 5. All of the maxillary first premolar had mesial root surface concavity. This mesial root surface concavity appeared to be more pronounced in 2-rooted tooth than single rooted tooth.