• 제목/요약/키워드: h2 Separation

검색결과 1,281건 처리시간 0.029초

$CO_2$ 선택투과 분리를 위한 Silica 코팅 Alumina 막의 세공 제어 (Pore Size Control of Silica-Coated Alumina Membrane for $CO_2$ Separation)

  • 서봉국;김성수;김태옥
    • 한국환경과학회지
    • /
    • 제8권2호
    • /
    • pp.263-269
    • /
    • 1999
  • For effective $CO_2$ separation using pore size controlled membrane, silica was deposited in the mesopores of a $\gamma$-alumina film by chemical vapor deposition of tetraethoxysilane (TEOS) and phenyl-substituted ethoxysilanes at 773-873K. The membranes prepared with phenyl-substituted ethoxysilanes were calcined to remove the phenyl group and control the pore size. The gas permaselectivity of prepared membranes was evaluated by using $H_2$, $CO_2$ $N_2$, $CH_2$ and $C_3H_8$ single component and a mixture of $CO_2$ and $N_2$. The membranes produced using TEOS contained micropores having permselectivity only to hydrogen, but the phenyl-subsitituted ethoxysilane derived membranes possessed micorpores which are recognizable molecules of $CO_2$, $N_2$ and $CH_4$. In the diphenyl-diethoxysilane-derived membrane, the $CO_2$ permeance and selectivity of $CO_2$/$CH_4$ were $10^{-6} m^3(STP) \cdot m^{-2} \cdot s^{-1} \cdot kPa^{-1}$ and 11, respectively. Therefore, the use of phenyl-substituted ethoxysilane was effective in controlling micropore size for $CO_2$ separation.

  • PDF

SI 열화학 수소 제조 공정에서 분젠 반응을 통한 상 분리 특성 (Phase Separation Characteristics via Bunsen Reaction in Sulfur-Iodine Thermochemical Hydrogen Production Process)

  • 이광진;김영호;박주식;배기광
    • 한국수소및신에너지학회논문집
    • /
    • 제19권5호
    • /
    • pp.386-393
    • /
    • 2008
  • The Sulfur-iodine(SI) thermochemical cycle is one of the most promising methods for massive hydrogen production. For the purpose of continuous operation of SI cycle, phase separation characteristics into two liquid phases ($H_2SO_4$-rich phase and $HI_x$-rich phase) were directly investigated via Bunsen reaction. The experiments for Bunsen reaction were carried out in the temperature range, from 298 to 333 K, and in the $I_2/H_2O$ molar ratio of $0.109{\sim}0.297$ under a continuous flow of $SO_2$ gas. As the results, solubility of $SO_2$, decreased with increasing the temperature, had considerable influence on the global composition in the Bunsen reaction system. The amounts of impurity in each phase(HI and $I_2$ in $H_2SO_4$-rich phase and $H_2SO_4$ in $HI_x$-rich phase) were decreased with increasing $H_2SO_4$ molar ratio and temperature. To control the amounts of impurity in $HI_x$-rich phase, temperature is a factor more important than $I_2/H2_O$ molar ratio. On the other hand, the affinity between $HI_x$ and $H_2O$ was increased with increasing $I_2/H2_O$molar ratio.

여과지전기영동법(濾過紙電氣泳動法)에 의한 장수명(長壽命) 핵분열(核分裂) 생성물분리(生成物分離) (Paper Electrophoretic Separation of Some Long-Lived Fission Products)

  • 이병헌;이종두
    • Journal of Radiation Protection and Research
    • /
    • 제8권2호
    • /
    • pp.15-35
    • /
    • 1983
  • 특별히 제작한 영동장치를 써서 고전압 전기영동법에 의하여 24시간 중성자 조사하고 150일 냉각한 90% 농축질산우라닐 수용액의 핵분열 생성물을 분리하였다. 핵분열생성물부터 Zr-95, Nb-95의 분리는 0.1M-$HClO_4$(pH=0.85), 0.05M-HCl+0.09M-KCl(pH=0.9), 0.1M-HCl(pH=1.1), 0.01M-HCl(pH=2.0)의 이동조건에서 가능하며 Zr-95, Nb-95는 원점부터 +1cm의 거리에서 분리된다. Zr-95와 Nb-95의 상호분리는 2% 수산암모늄을 첨가하는 경우 가능하다. 즉 0.1M-$HClO_4$, 0.05M-HCl+0.09M-KCl, 0.1M-HCl, 0.1M-식초산+0.1M- 식초산나트륨(pH=4.68)의 이동조건에서 원점부터 $-6{\sim}-7cm$ 거리에서 Nb-95, $+1{\sim}-1cm$ 거리에서 Zr-95가 각각 분리된다. 핵분열생성물부터 Ru-103의 분리는 0.025M-$Na_2CO_3+0.025M-NaHCO_3(pH=10.0)$, $0.01M-Na_3PO_4(pH=11.7)$, 0.1M-NaOH(pH=13.2)의 이동조건에서 가능하며 Ru-103는 각각 원점부터 -6cm, -4cm, -3cm거리 이동한다.

  • PDF

Real-time identification of the separated lanthanides by ion-exchange chromatography for no-carrier-added Ho-166 production

  • Aran Kim;Kanghyuk Choi
    • 대한방사성의약품학회지
    • /
    • 제7권2호
    • /
    • pp.69-77
    • /
    • 2021
  • No-carrier-added holmium-166 (n.c.a 166Ho) separation is performed based on the results of separation conditions using stable isotopes dysprosium (Dy) and holmium (Ho) to minimize radioactive waste from separation optimization procedures. Successful separation of two adjacent lanthanides was achieved by cation-exchange chromatography using a sulfonated resin in the H+ form (BP-800) and α-hydroxyisobutyric acid (α-HIBA) as eluent. For the identification process after separation of stable isotopes, the use of chromogenic reagents alternatively enables on-line detection because the lanthanides are hardly absorb light in the UV-vis region or exhibit radioactivity. Four different chromogenic reagents were pre-tested to evaluate suitable coloring reagents, of which 4-(2-Pyridylazo)resorcinol is the most recommendable considering the sensitivity and specificity for lanthanides. Lanthanide radioisotopes (RI) were monitored for separation with an RI detector using a lab-made separation LC system. Under the proper separation conditions, the n.c.a 166Ho was effectively obtained from a large amount of 100 mg dysprosium target within 2 hrs.

$CO_2$/NOx-free 50kW 매체순환식 가스연소기 산화-환원 연속반응 실증 (Continuous Operation of $CO_2$/NOx-free 50kW Checmial-Looping Combustor)

  • 류호정;진경태;이창근
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.227-234
    • /
    • 2004
  • For gaseous fuel combustion with inherent $CO_2$ capture and low NOx emission, chemical-looping combustion(CLC) may yield great advantages of savings of energy to $CO_2$ separation and suppressing the effect on environment. In chemical-looping combustor, fuel is oxidized by metal oxide medium (oxygen carrier particle) in a reduction reactor. Reduced particles are transported to oxidation reactor and oxidized by air and recycled to reduction reactor. The fuel and the air are never mixed, and the gases from reduction reactor, $CO_2$ and $H_2O$, leave the system as separate stream. The $H_2O$ can be easily separated by condensation and pure $CO_2$ is obtained without any loss of energy for separation. The purpose of this study is to demonstrate inherent $CO_2$ separation and no NOx emission and to confirm high $CO_2$ selectivity, no side reaction (i.e., carbon deposition, hydrogen generation) by continuous reduction and oxidation experiment in a 50kWtb chemical-looping combustor. NiO/bentonite particle was used as a bed material and $CH_4$ and air were used as reacting gases for reduction and oxidation respectively.

  • PDF

Vapor Permeation Characteristics of TiO2 Composite Membranes Prepared on Porous Stainless Steel Support by Sol-Gel Method

  • Lee, Yoon-Gyu;Lee, Dong-Wook;Kim, Sang-Kyoon;Sea, Bong-Kuk;Youn, Min-Young;Lee, Kwan-Young;Lee, Kew-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권5호
    • /
    • pp.687-693
    • /
    • 2004
  • Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.

Analysis Method of Volatile Sulfur Compounds Utilizing Separation Column and Metal Oxide Semiconductor Gas Sensor

  • Han-Soo Kim;Inho Kim;Eun Duck Park;Sang-Do Han
    • 센서학회지
    • /
    • 제33권3호
    • /
    • pp.125-133
    • /
    • 2024
  • Gas chromatography (GC) separation technology and metal oxide semiconductor (MOS) gas sensors have been integrated for the effective analysis of volatile sulfur compounds (VSCs) such as H2S, CH3SH, (CH3)2S, and (CH3)2S2. The separation and detection characteristics of the GC/MOS system using diluted standard gases were investigated for the qualitative and quantitative analysis of VSCs. The typical concentrations of the standard gases were 0.1, 0.5, 1.0, 5.0, and 10.0 ppm. The GC/MOS system successfully separated H2S, CH3SH, (CH3)2S, and (CH3)2S2 using a celite-filled column. The reproducibility of the retention time measurements was at a 3% relative standard deviation level, and the correlation coefficient (R2) for the VSC concentration was greater than 0.99. In addition, the chromatograms of single and mixed gases were almost identical.

Triton X-100 존재하에 Thorin에 의한 미량의 알루미늄 이온의 분광학적 정량 및 이온-교환 분리 (Ion-exchange Separation and Spectrophotometric Determination of Trace Amount of Aluminium with Thorinin the Presence of Triton X-100)

  • 박찬일;차기원;정덕채
    • 분석과학
    • /
    • 제12권6호
    • /
    • pp.515-520
    • /
    • 1999
  • Al(III)-thorin 착물에 대한 분광학적 정량 방법을 연구하였다. pH, 리간드와 계면활성제의 농도 및 안정화 시간에 대한 최적 조건을 결정하였다. thorin 리간드는 Fe(III), Ni(II), Cu(II), Pb(II) 그리고 Co(II)를 포함한 시료용액으로부터 Al(III)을 선택적으로 분리할 수 있도록 해준다. 여러 계면활성제중에서 비이온성인 Triton X-100에서 가장 안정한 상태를 나타냈고 수용액 중에서 Al(III)-Thorin-Triton X-100 착물은 526 nm에서 최대 흡광도를 가진다. 이 방법은 혼합된 시료용액에서 Al(III)을 정량하는데 이용되었다. 그리고, 분리 및 예비농축과정은 resoreinol-fermaldehyde 수지로 채워진 컬럼을 이용하였다. 컬럼 단계에서 수지의 흡착 능력은 pH변화에 매우 민감하기 때문에 pH를 조절하는 것이 필수적이다. 분리과정은 0.2 M acetic acid-sodium acetate 완충용액 (pH 4.5)와 1.0 M $HNO_3$용액으로 이루어졌다.

  • PDF

Immuno-Affinity Chromatography에 의한 B. thuringiensis H9B 균주의 모기살충성 내독소 단백질의 정제 (Purification of a Mosquitocidal Toxic Protein from B. thuringiensis strain H9B by Immuno-Affinity Chromatography)

  • 김광현;배수장;이광배
    • 환경위생공학
    • /
    • 제12권2호
    • /
    • pp.59-64
    • /
    • 1997
  • For purification of a 70kDa toxic protein of mosquitocidal delta-endotoxin from B. thuringiensis strain H9B, immuno-affinity chromatography was performed. After separation of 70kDa toxic proteins from the delta-endotoxin of the strain H9B on SDS-PAGE, the 70kDa toxic protein was subcutaneously injected into rabbit for making a polyclonal antibody. A anti-70kDa toxic protein was purified by a column chromatography packed with protein A-sepharose 4B gels. The 70kDa toxic protein from delta-endotoxin of the strain H9B was also purified by an immuno-affinity chromatography packed with CNBr-activated sepharose 4B gels conjugated anti-70kDa toxic protein after elution with 1/10M citric acid-1/5M Na$_{2}$HPO$_{4}$ buffer(pH3.2) containing 0.5M NaCl. The 70kDa toxic protein was purified through only one step-separation system, was demonstrated by SDS-PAGE and immunoblot.

  • PDF