• Journal of Korea Game Society
• /
• v.5 no.1
• /
• pp.3-10
• /
• 2005

In this paper, we propose an infrared LED tacking system called IRED Gun, which is designed for the game gun interface. The conventional systems are practically restricted by physical environment and are not robust to the measurement variations. We suggest the IRED Gun system to solve theses problems. Unlike conventional systems, our tracking system uses three infrared LED lights attached on monitor. Since the coordinate calibration is designed to regulate the detected target coordinates, more accurate aim position is calculated, which enables a game player to interact with a game more reliably. The experimental results verify the feasibility and validity of the calibration method and the infrared LED tacking system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.12-19
• /
• 2006

A gun barrel of infantry fighting vehicle is supported like a type of cantilever. Temperature of a gun barrel is increased by heat transfer due to the combustion of propellant charge during the firing. Thus, the muzzle of a gun barrel is deflected in accordance with its temperature and the accuracy rate is decreased by deflection of the muzzle. In this study, deflection of a gun barrel is estimated by measuring its restoration rate because measuring the deflection rate is difficult due to the vibration of the gun barrel during the firing. In order to obtain the relations between deflection rate and restoration rate of the 40mm gun barrel of Next Infantry Fighting Vehicle(NIFV) under varying temperature, measurement of deflection rate and restoration rate is carried out using 5.56mm Remington rifle barrel. Effect of the estimated deflection rate of a gun barrel of NIFV on the hit probability is also analyzed.

• Parasites, Hosts and Diseases
• /
• v.55 no.4
• /
• pp.399-408
• /
• 2017

A survey was performed to know the recent infection status of digenetic trematode metacercariae in clams and oysters from 4 sites in western coastal regions of the Republic of Korea (=Korea). Four species of clams (Mactra veneriformis, Ruditapes philippinarum, Cyclina sinensis, and Saxidomus purpuratus) were collected from Taean-gun, Chungcheongnam-do (Province), Buan-gun (County) and Gochang-gun, Jeollabuk-do, and oysters, Crassostrea gigas, from Shinan-gun, Jeollanam-do were transferred to our laboratory on ice and examined by the artificial digestion method. The metacercariae of Himasthla alincia were detected in 3 species of clams, M. veneriformis, R. philippinarum, and C. sinensis from the 3 surveyed areas. The positive rate and the mean density per clam infected were 98.9% (30.8 metacercariae) in M. veneriformis, 60.0% (5.0) in R. philippinarum, and 96.0% (28.4) in C. sinensis. The positive rate (mean density) of Acanthoparyphium tyosenense metacercariae in M. veneriformis was 50.0% (2.1) from Taean-gun and 70.0% (2.8) from Gochang-gun. The metacercariae of Parvatrema spp. were detected in M. veneriformis and R. philippinarum from Taean-gun and Gochang-gun; the positive rate (mean density) was 63.3% (4,123) and 50.0% (19) in M. veneriformis, and 6.7% (126) and 100% (238) in R. philippinarum from the 2 regions, respectively. The metacercariae of Gymnophalloides seoi were detected in all 30 oysters from Shinan-gun, and their average density per oyster was 646. From the above results, it has been confirmed that more than 3 species of metacercariae are prevalent in clams from the western coastal regions, and G. seoi metacercariae are still prevalent in oysters from Shinan-gun, Jeollanam-do, Korea.

• Parasites, Hosts and Diseases
• /
• v.44 no.1 s.137
• /
• pp.1-5
• /
• 2006

One coastal village in Haenam-gun and two in Yeongam-gun, Jeollanam-do were surveyed for intestinal parasite infections by fecal examination. The egg positive rates of Gymnophalloides seoi were high, $24.1\%$ (14/58) in Haenam-gun and $9.3\%$ (11/118) in Yeongam-gun. The egg positive rates of heterophyids, including Heterophyes nocens, and of Clonorchis sinensis were $10.3\%\;and\;6.9\%$ in Haenam-gun, and $14.4\%\;and\;8.5\%$ in Yeongam-gun, respectively. After praziquantel treatment and purgation, a total of 37,761 fluke specimens were recovered from 17 patients; 11 in Haenam-gun and 6 in Yeongam-gun. Gymnophalloides seoi was the most commonly recovered species, with 37,489 specimens in total (2,205 per person). Other recovered flukes included Heterophyes nocens, Stictodora fuscata, Heterophyopsis continua, Pygidiopsis sUmma, and undetermined species. These results indicate that the areas surveyed are new endemic foci of G. seoi.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.247-256
• /
• 2023

This study was conducted with the purpose of suggesting alternatives for the efficient operation of senior day care facilities in 22 cities and counties in the Jeonnam region by analyzing the efficiency of senior day care facilities. The analysis data for the study used the National Health Insurance Corporation's long-term care insurance for the elderly (2022), the Input variables were the number of facilities, the number of workers, the number of affordable, and the number of senior long-term care insurance recipients and the Output variables were the the number of users. As a result of the analysis, CCR was most efficient in Goheung-gun, Gokseong-gun, Gwangyang-si, Boseong-gun, Yeongam-gun, and Jindo-gun, BCC was most efficient in Goheung-gun, Gokseong-gun, Gwangyang-si, Gurye-gun, Damyang-gun, Boseong-gun, and Jindo-gun, and SE was most efficient in that order: Jindo-gun, Gokseong-gun, and Gwangyang-si. It turned out to be a super efficient area. In the contribution analysis, the number of affordable and workers variables were found to be variables that had a large impact on efficiency contribution. In the improvement potential analysis, the number of facilities variable was found to be a variable that had a significant impact on efficiency. Therefore, for the efficient operation of senior day care facilities, we suggest adjusting supply and demand, such as the number of facilities and affordable, and suggest that training programs to strengthen the expertise of workers who contribute greatly are required.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.306-312
• /
• 2014

The arcade gun has been a popular game controller in the video game market from the 1970s. The arcade gun, which is used partially in game centers and domestic games, recently is utilized as the interface for the interactive system and tangible media. On the other hand, the existing arcade gun has limits on hardware so it is unsuitable for wide screens. In addition, being platform-dependent, it is inapplicable to various types of content as a single module. This study suggests a correction algorithm that establishes an arcade gun system based on an infrared camera to solve those drawbacks and apply to possibly numerous surroundings.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.11
• /
• pp.1053-1059
• /
• 2007

This paper presents a target sate estimator(TSE) with low pass filter for improving the gun driving command. The ballistic computer uses target information such as predicted range, velocity, acceleration of a target to generate the gun command. We adopt the finite impulse response(FIR) filter as our TSE to shorten calculation time for the driving command and due to its inherent stability property. We also introduce a post-processing filter to reduce the high frequency components in the output signal of a TSE which may cause instability of gun driving. The first order low pass filter has been designed based on $H{\infty}$ criteria considering the noise characteristics. To show the validity of the present scheme, simulation results are given for the overall gun driving system including aircraft target information.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.714-719
• /
• 1999

Because the residual vibration of a gun barrel acts negatively on the firing of a large calibers gun, the fast stabilization of theresidual vibration is indispensible to the precise and successive firing. In this study, the residual vibrations of a gun barrel carrying a bore evacuator and a muzzle brake are investigated by the experimental method. The influence of the eigenfrequencies and the mode shapes of gun barrel on the fast stabilization of the residual vibration is studied for the various masses of bore evacuator and muzzle brake, the possition of bore evacutor. Also the relationships between the funcamental frequencies and the settling times of the gun barrel are investigated for the various parameters. The experiments to reduce the residual vibration using the viscoelastic damping treatment gives the best result among the various treatments for the reduction of residual vibration of the system.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.63-65
• /
• 2005

Because of simple principal and low cost, resistance spot welding has been used a lot for joining the sheet metal in automotive manufacturing process. Welding current, welding time, and force are the most important variables in resistance spot wording. Air guns have hem still used widely. The requirement of synchronizing between robot and weld-gun has become bigger as the field has been automated. The number of servo-gun in the field is trending upward because there're advantages as like to synchronize with robot and to control the stroke path and force by programming on servo-gun system. But no cleared force control method is suggested on servo-gun system until now. In this study, we proved the feedback current of the servo-motor can be used to an excellent force measuring sensor and the force is controlled by the feedback current. And we also detected force lowering during welding cycle on the servo-gun system and solved by compensated force control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.425-430
• /
• 2006

To meet an increasing demand for high performance in gun dynamic plant, both a precise and a fast response positioning are strongly required for the gun servo system. A mode switching control(MSC) scheme, which includes a fine stabilizing controller, fast positioning one and a switching function, is widely used to meet this requirement. Stabilization is performed through PID controller, while a time optimal control method is used for target designation. In this paper, a modified PTOS(Proximate Time Optimal Servomechanism) algorithm is derived so as to accommodate the damping term in the gun plant model. Also, applying a mode switching strategy, the bumpless transfer is made possible when the controller switches from PTOS to PID. To show the effectiveness of the overall control system, simulation results are given including the gun dynamics.