• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.239-245
• /
• 2012

This paper proposes a novel optimum design method for the PID controller of magnetic levitation-based Rail-Guided Vehicle(RGV) by a genetic algorithm using clone selection method and a new performance index function with performances of both time and frequency domain. Generally, since an attraction type levitation system is intrinsically unstable and requires a delicate controller that is designed considering overshoot and settling time, it is difficult to completely satisfy the desired performance through the methods designed by conventional performance indexes. In the paper, the conventional performance indexes are analyzed and then a new performance index for Maglev-based RGV is proposed. Also, an advanced genetic algorithm which is designed using clonal selection algorithm for performance improvement is proposed. To verify the proposed algorithm and the performance index, we compare the proposed method with a simple genetic algorithm and particle swarm optimization. The simulation results show that the proposed method is more effective than conventional optimization methods.

• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.489-499
• /
• 2006

Since the application of chemicals in confined spaces under the canopy of an orchard is hazardous work, it is needed to develop an autonomous guidance system for an orchard sprayer. The autonomous guidance system developed in this research could steer the vehicle by tracking an overhead guidance rail, which was installed on an existing frame structure. The autonomous guidance system consisted of an 80196 kc microprocessor, an inclinometer, two interface circuits of actuators for steering and ground speed control, and a fuzzy control algorithm. In addition, overhead guidance rails for both straight and curved paths were devised, and a trolley was designed to move smoothly along the overhead guidance rails. Evaluation tests showed that the experimental vehicle could travel along the desired path at a ground speed of 30 $\sim$ 50 cm/s with a RMS error of 5 cm and maximum deviation of less than 12 cm. Even when the vehicle started with an initial offset or a deflected heading angle, it could move quickly to track the desired path after traveling 2 $\sim$ 3 m. The vehicle could also complete turns with a curvature of 1 m. However, at a ground speed of 50 cm/s, the vehicle tended to over-steer, resulting in a zigzag motion along the straight path, and tended to turn outward from the projected line of the guidance rail.

• International Journal of Railway
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2016

In order to achieve a comprehensive utilization of railway networks, it is necessary to accurately assess the timetable indicators that effect the train operation. This paper describes the parameter calibration for two timetable indicators: scheduled running time and scheduled dwell time. For the scheduled running time, an existing model is employed and the single timetable parameter (percentage of minimum running time) in that model is optimized. For the scheduled dwell time, two intrinsic characteristics: the significance of stations and the average headway at each station are proposed firstly to form a new model, and the corresponding timetable parameters (the weight of the significance and the weight of the average headway) are calibrated subsequently. The Floyd Algorithm is used to obtain the connectivity among stations, which represents the significance of the stations. A case study is conducted in a light rail transportation system with 17 underground stations. The results of this research show that the optimal value of the scheduled running time parameter can be automatically determined, and the proposed model for the scheduled dwell time works well with a high coefficient of determination and low relative root mean square error through the leave-one-out validation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.88-91
• /
• 2007

Turnout system is a mechanical installation enabling trains to be guided from one track to another which is consists of point blades, common crossing and guard rail etc. These structural feature causes vibration, noise and damages while railroad car wheel is passes by. A tilting train is a train with a tilting mechanism that enables increased speed on regular railroad tracks. The aim of this paper is to study a characteristics of the shock-vibration and noise of tilting and existing train passes by turnout systems. To analyze and assesment, noise and vibration measurement was carried out at the Naesu-station of Chungbuk-line which equipped with cast manganese crossing and built-up crossing and Illo-station of Honam-line which equipped with cast manganese crossing.

• IE interfaces
• /
• v.15 no.4
• /
• pp.364-373
• /
• 2002

This paper developed an operating software for the manufacturing cell of a model plant. The model plant, which was manufactured by Fishertechnik, consists of an assembly cell, a machining cell, and supplementary material handling equipments. Each I/O module of the model plant communicates with the INTERBUS controller devices via High-level Language Interface(HLI). The machining center has two machining cells, which consists of 4 machines respectively, two 3-axis portal transporters, and a rail guided vehicle(RGV). The Petri-Net was used to investigate the dynamics of each machining cell, e.g., the relation of material handling equipments and machines. The operating software was analyzed and designed by Object Oriented Technique. The software was implemented using Delphi 3.0 under Windows 95/NT operating system.

• International Journal of Safety
• /
• v.11 no.2
• /
• pp.1-4
• /
• 2012

The falling accidents have increased in the structure and heavy industries. Therefore, a various falling prevention systems with safety block and lanyard have been supplied in order to prevent falling accidents and acquire the long life and cost down for the maintenance. However, there are not the reliable and domestic the falling prevention system until now. Almost systems were imported from U.S.A, Japan, U.K and Germany. The structural safety of the imported safety block is satisfied sufficiently, but it has heavy weight due to the cover with the aluminum and thickness. So, many workers are not feeling themselves. Thus, the aim of this work is to develop a commercial safety block that has a light weight and strength. And the cost efficiency of the system and safety for workers also will be improved remarkably.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.215-224
• /
• 2008

In this paper, we introduced a linear motor-based transfer system with an active pid controller which can be replaced with an automated guided vehicle (AGV) for the port automation. This system, which is named LMCTS(liner motor-based container transfer system), is based on PMLSM (permanent magnetic linear synchronous motor) which basically consists of stator modules on the rail and shuttle car. Therefore more progressive and adaptive control mechanisms should be required to control a system with large variation of container weight, the difference of each characteristic of stator modules, a stator module's trouble etc. We introduced an active control mechanism with an online tuning scheme using modified evolutionary strategy. Some computer simulations are implemented to assess the robustness of the proposed system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1501-1514
• /
• 2008

Recently, so as to solve the urban transportation problem the LRT(Light Rail Transit) system has been studied on the essential technology and the engineering know-how, which lead lower construction cost and higher reliability. The localization development of rubber tired AGT(Automatic Guided Trainsit) system has performed from 1999 to 2004, as a national project of the Minister of Land, Transport and Maritime Affairs. For the application of the rubber tired AGT system in Busan Subway 3-2 Line, this study is focused on the reliability of aluminium profiles vehicle carbody and the establishment of the test and evaluation technologies. In this paper, 3D modeling simulation was applied to the load test of aluminium vehicle carbody. The reliability of the vehicle carbody was estimated as the fatigue test of welded aluminium profiles. From the test and simulation results, it could be concluded that the developed rubber tired AGT shows a good structural reliability and integrity.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.679-686
• /
• 2008

There has been an increasing demand of introducing innovative public transport modes meriting high flexibilities of a bus mode along with on-time accuracy and quality environment-friendliness of a rail mode, as it is considered to significantly contribute to reducing huge social expenditures on the traffic congestion and environmental pollution agenda, and to be an alternative solution to better the urban transport problems. In order to comply with the need, Seoul Municipal Government has recently decided to build up GRT system of a new concept in Nangok area in Seoul, the first in its kind in Korea. The concession has been awarded to Seoul Metro. This thesis will study and benchmark similar systems abroad under operation, and further review necessary requirements overall which would secure full readiness for the operation of Nangok GRT system.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.131-138
• /
• 2021

The optimization of the specifications of vertical silicon on insulator (SOI) slot optical waveguides suitable for integrated-optical biochemical sensors was performed through computational analysis of the confinement factor of the guided mode distributed in the slot in addition to analytical examination of the TE mode. The optimized specifications were confirmed based on sensitivity in terms of the change in the refractive index of the biochemical analyte. When the slot width, rail width, and height were set to 120 nm, 200 nm, and 320 nm, respectively, the confinement factor was evaluated to be about 56% and the sensitivity was at least 0.9 [RIU/nm].