• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1A
• /
• pp.45-52
• /
• 2010

This study pointed on the dynamic impact of AGT (Automated Guide-way Transit) bridge, due to concrete rail prominence. An experiment was done with 30 m P.S.C. bridge in AGT test line in Kyungsan. An artificial prominence with 10 mm hight, was installed at the mid span of concrete rail. And computer simulation was executed for the artificial prominence. As an experiment result, in the case of with prominence, bridge acceleration responses are increased 50% at the speed range of 20 km/h-60 km/h, and bridge displacement responses increased slightly. With these results, the prominence of concrete rail can be induce excess impact and vibration. And the computer program simulated much the same as experiments. So this program can be used for AGT bridge design and formulate the standard of concrete rail management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2020

This paper introduces the parking guide service developed to address the inconvenience of parking in areas where demand for parking spaces is high, such as busy streets and tourist attractions. Due to difficulties in measuring and developing the actual parking lot while driving the car, we created a temporary parking lot and created Arduino RC Car to replace the actual car. Video processing based on Open CV allows users to identify the entire parking lot, parking space, and completed parking space, and track moving cars, and this information has been developed to enable users to see through the application. The application allows the user to book the desired parking space and introduce a way-finding algorithm to guide them through the optimal path to the selected parking compartment.

• Tribology and Lubricants
• /
• v.36 no.1
• /
• pp.39-46
• /
• 2020

Air stages are usually applied to precision engineering in sectors such as the semiconductor industry owing to their excellent performance and extremely low friction. Since the productivity of a semiconductor depends on the acceleration and deceleration performance of the air stage, many attempts have been made to improve the speed of the stage. Even during sudden start or stop sequences, the stage should maintain an air film to avoid direct contact between pad and the rail. The purpose of this study is to quantitatively predict the dynamic behavior of the air stage when acceleration and deceleration occur. The air stage is composed of two parts; the stage and the guide-way. The stage transports objects to the guideway, which is supported by an externally pressurized gas bearing. In this study, we use COMSOL Multiphysics to calculate the pressure of the air film between the stage and the guide-way and solve the two-degree-of-freedom equations of motion of the stage. Based on the specified velocity conditions such as the acceleration time and the maximum velocity of stage, we calculate the eccentricity and tilting angle of the stage. The result shows that the stiffness and damping of the gas bearing have non-linear characteristics. Hence, we should consider the operating conditions in the design process of an air stage system because the dynamic behavior of the stage becomes unstable depending on the maximum velocity and the acceleration time.

• School Mathematics
• /
• v.6 no.4
• /
• pp.345-359
• /
• 2004

Many researchers have studied students' error patterns in learning mathematics but the results haven't much effected on teaching situation. This paper is to find out how the results have been reflected on 6th and 7th Korean elementary school mathematics textbooks, workbooks, and teachers' guide books. The focuses of analysis are the four; (a)Type of materials, (b)Type of problems, (c)Type of errors and number of rela- ted problems, and (d)organization and explanation type. Results indicate that both 6th and 7th materials don't use effectively students' error patterns to teach computation, in particular, 7th textbooks scarcely treat them. It suggests that we should grope a way to use the fruitful results of this area to teach mathematics effectively.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.69-82
• /
• 1992

Vibration of intake menifold is important as it could worsen the noise levels radiated from surface itself and support bracket, and it eventually leads to the failures of a Throttle Position Sensor and an Idle Air Control Valve. In this study, structural modification method is proposed to reduce structural vibration of an intake manifold system. At first, vibration problems are identified through tests on a running engine. Then modal data acquired by modal testing and finite element analysis are helpful to understand vibration mechanism of the system, and used as the design guide when structural modifications are attempted. After the system model is validated by comparison of the modal data obtained from analysis and experiment, iterative calculations are performed to find optimized structure of the system by finite element analysis. As a result, a newly designed plenum bracket is suggested in such a way that the intake manifold is stiffened, and that design of the support bracket is suggested in such a way that the intake manifold is stiffened, and that design of the support bracket is changed in terms of bolting position, thickness, shape, and minimum weight increase. Finally, it is shown that a new design achieves a significant reduction of vibration of an intake manifold system and it is confirmed by tests on a running engine.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.263-268
• /
• 2002

The image quality of imageguide depends on the structure, material, length of microfibers and the phenomena such as cross-talk and leaky ray between adjacent fibers. These Parameters should be considered as important factors in the image transmission qualify of fibers. However it is considered to be very difficult to assess all the parameters in a consistent way Therefore. two image characteristics, image resolution and image brightness are measured and analyzed to determine the image quality of imageguide. But the exact methods to measure two image characteristics of imageguide are not reported. In this study, the image brightness of imageguide for ultrathin endoscope is determined by measuring of the numerical aperture. the packing fraction and the attenuated power ratio of imageguide. Especially it is possible to obtain more exact results from measuring the numerical aperture of whole image guide than those from theoretical calculation of the single microfiber in an image guide. The image brightness of the image guide which has $3.1\mu m$ microfibers is about 37% less than that with $4.1\mu m$ microfibers.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.119-124
• /
• 2018

The augmented reality(AR) technology enables to acquire various image information at the same time by combining virtual image information with the user's viewpoint. These AR technologies have been used to visualize patients' organs and tissues during surgery and diagnosis in the fields of Image-Guide Operation, Surgical Training, and Image Diagnosis by medical convergence, and provides the most effective surgical methods. In this paper, we study the technical features and application methods of each element technology for medical fusion of AR technology. In the AR technology for medical convergence, display, marker recognition and image synthesis interface technology is essential for efficient medical image. Such AR technology is considered to be a way to drastically improve current medical technology in the fields of image guide surgery, surgical education, and imaging diagnosis.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.911-915
• /
• 2007

The course education is a concept including guidance of entrance into a school of higher grade and for choice a career which is suitable for us. The choice of career can affect the quality of our life. When we regard the course education as guide the way to live happily and valuably, we study about the object of course education in curriculum of computer. This study, first, analyze a course of computer and extract the points. Next, it researches a study and a career which is relevant the units. Lastly, it defines the way in studies and career according to the points, and systematize the points in steps.

• International Journal of Costume and Fashion
• /
• v.7 no.2
• /
• pp.49-63
• /
• 2007

In this study, we inquire into the general concepts of eroticism as it appears in literature and the arts, and use this as a foundation to meditate on the eroticism of attire throughout history. We also ascertained external forms based on the range of "The way we look" by Delong. In this way we inclusively studied both the content and form of modes of eroticism in the perspective of Brodsky's "linked solution." The original concept of eroticism is a technique by which one attains physical passion, referring to a nature which is deeply rooted in the cultural traditions, myths, habits. religion and arts of mankind, inducing expressions of sensual love. We integrated this eroticism in 4 categories: sensuality, which induces beauty; naturality, denoting idealization or rational beauty; primitivity, characterized by grotesque expressions or direct and natural sexual depictions; and symbolism by which sex is symbolically or mechanically projected. The concept of eroticism contains both positive and negative aspects, but rather than dealing with sex in a mechanical or perverted manner to express eroticism, it is more appropriate to guide the direction of modes of eroticism by stimulating the "desire to show" and the "desire to see" with the dialectic of obstruction and exposure as a figurative expression of true passion, and narcistic phenomena in which beauty is expressed through exaggeration or magnification and adhesion.

• Korean System Dynamics Review
• /
• v.17 no.1
• /
• pp.77-105
• /
• 2016

Whenever Information leak case had been happened, even though IT Infra systems were reinforced, those cases of kind were not decreased. It meant that the causes are not only the fault of IT, but also other things. So that the information leak cases should have been studied by the interdisciplinary way. There was a point of view for the Business Ethics which needed to be studied in the interdisciplinary way. Financial Information Leak Case of three representative Card Companies in Korea which is happened in 2014 was a case which was composed by many problems. These were bad circumstances, half-educated, lower salary, and the most of all, the C-Levels' ignorance of the law. By studying the CLD: Causal Loop Diagram of Business Ethics and those mentioned factors, few meanings were discovered. Firstly, this case was not a accident, but a predeterminate issue at all, because of the structural unethical corruption. Secondly, main reason of this case was not only criminals who leaked information, but also managers, especially CEO who didn't obey the law, forced that to employees. Thirdly, although those companies had moral guide and did CSR activities, it was not help to protect this information leak case. This study shows that the important thing was not the action for showing, but effective action to management for sustainability.