• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.84-91
• /
• 2005

In this paper, we describe the real-time parallel processing simulator developed for the use of performance analysis of rolling missiles. The real-time parallel processing simulator developed here consists of seeker emulator generating infrared image signal on aircraft, real-time computer, host computer, system unit, and actual equipments such as auto-pilot processor and seeker processor. Software is developed from mathematic models, 6 degree-of-freedom module, aerodynamic module which are resided in real-time computer, and graphic user interface program resided in host computer. The real-time computer consists of six TIC-40 processors connected in parallel. The seeker emulator is designed by using analog circuits coupled with mechanical equipments. The system unit provides interface function to match impedance between the components and processes very small electrical signals. Also real launch unit of missiles is interfaced to simulator through system unit. In order to apply the real-time parallel processing simulator to performance analysis equipment of rolling missiles it is essential to perform the performance verification test of simulator.

• 한국가정과교육학회지
• /
• 제2권1호
• /
• pp.123-142
• /
• 1990

The aim of this study is to apply lesson design of high school home economics to model which consists of six steps of instructional procedure among various models for instructional design, Through thesis, central content of each step was written as follows; 1) At the step of establishment of terminal instructional objectives, educational objectives, terminal instructional objectives was analyzed and specific instructional objectives was extracted. 3) At the step of diagnosis of entering behavior, ability of prior learning and ability of preliminary learning were evaluated, which was used as establishing instructional strategy and doing individual guidance. 4)At the step of determining instructional strategy, instructional strategy should be extracted by considering instructional event which is adequate to content of instruction. Instructional strategy consists of five main factor, factors, those are, activity of introduction of instruction, presentation of content of instruction and information, participation of learner and learning activity, identification of learning result, and subsequent treatment after evaluation. 5)Specific activity at the step of selection and development of instructional media consists of reidentification of instructional objectives determination of learning type, drawing up instructional media analysis sheet, synthesis of selected media, and explanatory note of selected media. In order to increase efficiency of instruction at the step of determining instructional strategy, this step should be considered simultaneously. 6)The step of try-out and evaluation of instructional design should be efficient when designed instruction was inputted at class after evaluation of each step of instructional design.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1051-1060
• /
• 2001

Flow visualizations and hot-wire measurements on the inside flows of two different incubators are presented in this paper. An anatomically-correct neonate model was fabricated using the rapid prototyping machine, based on the 3-D scanned data. The result showed that air flow in the incubator was affected not only by the air circulation system but also by the design of incubator chamber. Large rotating motions were located around the corners of free space. A number of small eddies were found in regions of high shear flow, in areas such as that between the air inlet and the neonate. But, these small eddies were found to be stationary at that locations. Those small eddies might interfere with convective and evaporative heat transfers from the neonate. This study has led to a better understanding of flow mechanism in an incubator chamber and provided the guidance needed for the advancement of improved computational fluid dynamic models.

• 보건행정학회지
• /
• 제19권4호
• /
• pp.33-52
• /
• 2009

Health promotion policies have needed to assess in detailed and evidence-based work to set a policy goal and clear future directions of health promotion in Korea. To identify the major factors related with health promotion, we assessed the associations between public health outcome (potential years of life loss, PYLL) and national health determinants. For this purpose, we used a pooled cross sectional time-series regression analysis with corrected fixed effect models involving sixteen member countries of the Organisation for Economic Cooperation and Development during the period 1970 to 2001. The PYLL was positively associated with tobacco and alcohol consumption (model 1 and 2) and calories intake (model 2 and 3) while the PYLL was negatively associated with GDP, fruit and vegetable intake (model 2), number of doctors (model 3), coverage rates of health care security, and elderly population rates (model 4). In conclusion, health behaviors related with tobacco, alcohol, and nutrition were significant health determinants for health outcome. Overall analysis results of this study will provide a guidance toward improved macro- and micro-policy development for future health promotion policy in Korea.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.367-368
• /
• 2012

In resent years, engineering thermoplastics represent a means for designers to integrate parts, facilitate assembly, reduce weight and lower the costs of their parts to improve the fuel efficiency and competitiveness of the cars. Thermoplastic turbo charger intake hose is one of most sophisticated application in thermoplastics under the hood. Used as part of weight & cost reduction and performance improvement program, thermoplastic turbo charger intake hose has been developed as rubber and metal replacement. For optimized product, NVH performance is a important criteria while keeping same durability required with current system. Though a number of studies have been conducted on the resonator hose and its analytical models, the most of studies were focused on transmission loss itself. This paper presents contribution of vehicle interior noise according to design parameters like profile, bellows type, bellows position, material characteristic. And we will review the design guidance for optimized product of thermoplastic turbo charger intake hose.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.77-88
• /
• 2015

The dynamics of relative motion in a perturbed orbital environment are exploited based on Gauss' and Cowell's variational equations. The inertial coordinate frame and relative coordinate frame (Hill frame) are used, and a linear high fidelity model is developed to describe the relative motion. This model takes into account the primary gravitational and atmospheric drag perturbations. Then, this model is used in the design of a navigation, guidance, and control system of a chaser vehicle to approach towards and to depart from a target vehicle in proximity operations. Relative navigation uses an extended Kalman filter based on this relative model to estimate the relative position/velocity of the chaser vehicle with respect to the target vehicle. This filter uses the range and angle measurements of the target relative to the chaser from a simulated LIDAR system. The corresponding measurement models, process noise matrix, and other filter parameters are provided. Numerical simulations are performed to assess the precision of this model with respect to the full nonlinear model. The analyses include the navigation errors and trajectory dispersions.

• Nuclear Engineering and Technology
• /
• 제35권1호
• /
• pp.64-79
• /
• 2003

In the risk and reliability analysis of complex technological systems, the primary concern of formal uncertainty analysis is to understand why uncertainties arise, and to evaluate how they impact the results of the analysis. In recent times, many of the uncertainty analyses have focused on parameters of the risk and reliability analysis models, whose values are uncertain in an aleatory or an epistemic way. As the field of parametric uncertainty analysis matures, however, more attention is being paid to the explicit treatment of uncertainties that are addressed in the predictive model itself as well as the accuracy of the predictive model. The essential steps for evaluating impacts of these model uncertainties in the presence of parameter uncertainties are to determine rigorously various sources of uncertainties to be addressed in an underlying model itself and in turn model parameters, based on our state-of-knowledge and relevant evidence. Answering clearly the question of how to characterize and treat explicitly the forgoing different sources of uncertainty is particularly important for practical aspects such as risk and reliability optimization of systems as well as more transparent risk information and decision-making under various uncertainties. The main purpose of this paper is to provide practical guidance for quantitatively treating various model uncertainties that would often be encountered in the risk and reliability modeling process of complex technological systems.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.795-800
• /
• 2007

In the previous study, a simple but effective analysis procedure, named as an Improved Modal Pushover Analysis (IMPA) was proposed to estimates the seismic capacities of multi-span continuous bridge structures, on the basis of the modal pushover analysis which considers all the dynamic modes of a structure. Differently from other previous studies, IMPA maintains the simplicity of the capacity-demand curve method and also gives a better estimation of the maximum dynamic response of a structure. Nevertheless, its applicability has never been approved for multi-span continuous bridges with large differences in the length of their adjacent piers. This paper, accordingly, concentrates on a parametric study to verify the efficiency and limitation in application of IMPA through a correlation study between various analytical models including the Equivalent Single Degree Of Freedom (ESDOF) and Modal Pushover Analysis (MPA) usually used in the seismic design of structures. Based on the obtained numerical results, this paper introduces a practical guidance and/or limitation for using IMPA to predict the seismic response of a bridge effectively.

• 대한가정학회지
• /
• 제40권7호
• /
• pp.69-82
• /
• 2002

The objective of this study was to develop a Web based learning environment for Home Economics Education(HEE) using ICT (Information & Communication Technology). For the study, the following procedures were performed: 1) the review of literature, 2) development of teaming environment and questionnaires based on Web for HEE using ICT. The Web based learning environment was investigated and designed, and evaluated by the users. The problems indicated through the evaluation were revised and complemented. In addition, 13 sets of Learning questionnaires, which were verified using the same procedure as above, were developed to provide problem solving ability through the Web based learning environment. Learning environment based on the Web entitled "Together with the classroom of HEE" has a main menu, which is composed of rooms for HEE, students, teachers, various topics, recommendation sites, chatting, and e-mail. A room for HEE, in which teaming activity mainly occurs by following the sequences of learning procedures, includes other sub-rooms for the guidance of Loaming, discussion, directories for reference, question and answer, submission of homework, evaluation, and an encyclopedia. Therefore, this study implicates: 1) achievement of teaming environment using the ICT mainly made by students who solve problems closely related to daily life, 2) development of practical learning questionnaires fitted in the present state, 3) preparation for the curriculum. Finally, from this study, I suggested that further studies are needed to develop models for learning, interaction between students and teachers, and the learning materials under the Web based loaming environment.

• 수산해양교육연구
• /
• 제28권2호
• /
• pp.336-349
• /
• 2016

The evaluation of the after-school program depends on whether it achieves its objectives or not so far which makes that it is not easy to figure out which mechanism is attributed to the consequences of the program. This study aims at developing the logic model of the after-school program and follows the processes such as literature review, opinion survey by specialists and in-depth interview with stakeholders. The target program of the study was focused on the special ability aptitude education in the elementary schools. The initial developed theory model was validated and finalized through being reviewed by specialists and teachers in charge of target schools. Based on the framework of logic model, the models are composed of context, components, activities, output/short term outcomes, and long term outcomes. As the key factors of the after-school program, amicable communication between the stakeholders, quality of the program in itself, follow-up management, counseling and guidance for students, instructors' expertise, and quality management of the program were drawn.