• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2232-2245
• /
• 2013

The present study proposes efficient procedural modeling methods for enabling the growth and creation of various trees with minimal user control. Growth volume algorithms are utilized in order to easily and effectively calculate many parameters that determine tree growth, including branch propagation. Procedural methods are designed so that users' interactive control structures can be applied to these algorithms to create unique tree models efficiently. First, through a two-line-based interactive growth volume control method, the growth information that determines the overall shape of the tree is intuitively adjusted. Thereafter, independent branch control methods designed to control individual branches are added to the growth deformation in order to enable the growth of unique trees. Whether the growth processes of desired trees can be easily and intuitively controlled by the proposed method is verified through experiments. Methods that can apply the proposed methods are also verified.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.275-280
• /
• 2004

Shape optimization was performed to obtain the precise shape of cutouts including the internal shape of cutouts in laminated composite plates by three dimensional modeling using solid element. The volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. The volume control of the growth-strain method makes Tsai-Hill failure index at each element uniform in laminated composites under the initial volume. Then shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study. (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsal-Hill failure index was reduced up to 67% when shape optimization was peformed under the initial volume by volume control of growth-strain method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.277-282
• /
• 2003

The growth-strain method was applied to cutout optimization in laminated composite plates. Since the growth-strain method optimizes a shape by generating the bulk strain to make the distributed parameter uniform, the distributed parameter was chosen as Tsai-Hill value. In this study, of particular interest is to see whether the growth-strain method developed for shape optimization in isotropic media would work for laminated composite Plates. In volume control of the growth-strain method, it makes Tsai-Hill value at each element uniform in laminated composite plates under the predetermined volume. The shapes optimized by Tsai-Hill fracture index were compared with those of the initial shapes for the various load conditions and predetermined volumes of laminated composite plates. As a result, it was verified that volume control of the growth-strain method worked very well for cutout optimization in laminated composite plates.

• Journal of Chest Surgery
• /
• 제6권1호
• /
• pp.15-22
• /
• 1973

The definition of cancer, its diagnosis and its prognosis all depend upon description of growth. To the layman a synonym for cancer is a "growth". There are no quantitative terms for the description of growth or growth rate in clinical use. There has been no attempt to assign values that would define "rapidly" or "slowly" growing. Estimates of growth potentiality are implied in the descriptive phrases "poorly differentiated" or "well differentiated", "highly malignant" or "low grade malignancy". and in systems of grading. These qualifying terms represent a personal impression, clinically useful in prognosis, but relative in nature. They do not lend themselves to uniform application or precise measurement for purpose of comparison. Growth is related to size and time. The volume of tumor depends upon the duration of the period of growth and the rate of growth. If the interval and change in volume are known. the average growth rate can be determined. If the growth rate is determined, and assumed to be constant., the duration of a given tumor and the time of inception can be estimated. The commonest concept of the origin of cancer is that as a result of a mutation involving a single cell, succeeding divisions of cells establish a colony with the characteristics recognizable as cancer. If the growth rate of the hypothetical tumor were constant it could be described in terms of "tumor volume doubling time". In the department of thoracic surgery of St. Mary hospital in Catholic Medical College, a clinical evaluation for the growth rate, degree of malignancy, resectability and prognosis was done on a total 24 cases of primary bronchogenic carcinoma which contour was significant on the chest X-ray film as possible estimating the tumor volume doubling time. The following results were obtained: 1. In the cases of 6.0cm or more in diameter of minor size at operation the resectability rate was lower and in the cases of 60 days or more in the tumor or volume doubling time the resectability rate was higher. 2. If differentiation of cancer cells was lower graded in tissue pathology, the tumor volume was shorter and the resectability rate was lower. 3. The tumor volume doubling time of the primary bronchogenic carcinoma occured more over 60 years of age was slightly shorter than under 60 years of age. 4. The tumor size at operation was more important to evaluate the survival time and prognosis than the tumor volume doubling time because the tumor growth was not always constant, we presume.mor volume doubling time because the tumor growth was not always constant, we presume.

• Journal of Forest and Environmental Science
• /
• 제31권1호
• /
• pp.47-54
• /
• 2015

The study was performed to analyze the growth of the red pine (Pinus densiflora) in the Eastern Region of Korea. Stem profile data from a total of 8 dominant trees of which each tree represents its site were collected and used for the analysis. The stem volumes were calculated using Smalian's formula and much higher than the ones by Korea Forest Research Institute in larger than dbh 40 cm. The total bark volumes were more proportionally related to dbh and stem volume than to height and age. The bark thickness and volume decreased as relative height increases but increased as relative dbh increased. The average PAI of dbh and height reached the highest at 0.8 cm/yr (age 15) and at 0.45 m/yr (age 30) respectively, while the average PAI of volume steadily tended to increase up to age 80. The growth percentages of dbh, height and volume tended to decrease with age and volume growth percentage was higher than dbh and height.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.250-253
• /
• 2000

We researched effects of growth on initial inoculum size, liquid volume, and medium feeding rate etc. Cell suspension inoculated at low cell concentrations showed a typical growth reduction, whereas root cultures showed an improvement in growth. In this paper, Hairy roots showed high growth rate at 0.4 % inoculum size and 100 mL liquid volume in 250 mL flask cultures.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.59-59
• /
• 2020

Salix gracilistyla has a characteristic of fast growth especially in the river side or infertile soil, showing a lot of lateral branches and a strong root system among the Salix. spp. On the basis of results observed, we provide several growth characteristics of S. gracilistyla among some selected provenances. In two-year results, root collar diameter ranged from 33.5 mm to 56.7 mm. Taeback showed the lowest value, and Jeongseon and Hoengseong were higher than the other areas in the traits above. Height growth was the lowest in Samcheok and the highest in Wonju. To examine growth and development of lateral branches is important because S. gracilistyla has a lot of lateral branches which account for high biomass production. Length of lateral branch showed high variation, in which the highest number was observed in Yeongwol and the lowest in Samcheok. Many lateral branches were shown in Wonju. Preliminary study on biomass resources evaluation, we analyzed correlation between volume and length, and volume and root diameter. High correlation was observed between root diameter and plant volume. And we compared the observed volume with the caculated volume by regression formula. To evaluate Salix species as biomass resources, it is needed to survey growth characteristics continuously and adopt selection of individuals or families of high biomass and caloric values by reliable data. In addition, Salix spp. can be also applicable to selection breeding regime because of feasible propagation and fast growth.

• 한국산림과학회지
• /
• 제97권6호
• /
• pp.627-633
• /
• 2008

본 연구는 국가 산림자원조사 자료를 이용하여 우리나라에 분포하는 주요 참나무류 수종의 영급별 재적생장률을 추정하고 수종간의 통계적 차이와 연관성을 분석하고자 하였다. 또한 분석된 결과를 토대로 현재 사용되고 있는 단목재적식의 적합성 및 갱신 필요성을 점검하는 한편, 임령에 따른 수종별 재적생장률을 예측할 수 있는 모델을 개발하고자 하였다. 본 연구에서 사용된 주요 참나무류 수종은 상수리나무, 갈참나무, 졸참나무, 굴참나무, 떡갈나무, 그리고 신갈나무의 6개 수종이다. 이들 수종에 대해서 표본 조사된 직경생장량을 근거로 직경생장률과 수고생장률을 산출하였으며, 이를 이용하여 최종적으로 재적생장률을 추정하였다. 추정된 재적생장률이 수종별 영급별로 차이가 있는지를 점검하기 위해 분산분석 및 Duncan의 다중검정을 실시한 결과, 참나무류 6개 수종의 영급별 재적생장률은 수종에 따라 다소 차이는 있지만, II영급에서 10% 내외의 높은 생장률을 보이다가 III영급에서는 6% 내외로 낮아지고 영급이 더 커짐에 따라 생장률은 감소하는 것으로 나타났다. 수종별로는 상수리나무, 갈참나무, 졸참나무의 3개 수종의 생장률이 상대적으로 높았으며, 굴참나무, 떡갈나무, 신갈나무는 생장률이 낮은 것으로 분석되었다. 6개 대상수종들을 생장률이 높은 그룹과 낮은 그룹으로 나누고 그 생장률의 차이를 분석한 결과, 그룹 내에서는 큰 차이가 없었으나, 그룹 간에는 뚜렷한 차이가 있는 것으로 나타났다. 이러한 결과에 따라 각 그룹별 재적생장률 예측모델도 개발하였다. 본 연구의 결과는 기존의 참나무류 단목재적식을 사용하기 위해서 적용하였던 수종구분과는 다소 차이가 있는 것으로서 기존 단목재적식을 개선할 여지가 있음을 보여주고 있다.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.16-22
• /
• 2004

Shape optimization was performed to obtain the precise shape of cutouts including the internal shape of cutouts in laminated composite plates by three dimensional modeling using solid element. The volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. The volume control of the growth-strain method makes Tsai-Hill failure index at each element uniform in laminated composites under the initial volume. Then shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminated composite plate, (2) The optimal shapes on the various load conditions and cutouts were obtained, (3) The maximum Tsai-Hill failure index was reduced up to 67% when shape optimization was performed under the initial volume by volume control of growth-strain method.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.174-181
• /
• 2005

In order to investigate the behavior of fatigue crack growth of SiC-particulate- reinforced Al-Si alloy composites, fatigue tests using single edge notched tension(SENT) specimens were performed. Composite materials were manufactured by using both permanent die casting and extrusion processes with different volume fractions of $10\%\;and\;20\%$. $SiC_p-reinfurced$ Al-Si composites showed the increased levels of threshold stress intensity factor range, ${\Delta}K_{th}$, for the increased volume fractions of SiC particles, which implies the increased fatigue crack growth resistance at the threshold or low ${\Delta}K$ levels, compared to the unreinforced Al-Si alloy. In the Paris region, however, the composites showed the increased rate of crack growth resulting in the unfavorable effects on the fatigue crack growth resistance. Critical stress intensity factor range at unstable crack growth leading to final fracture decreased as the volume fraction of SiC particle increased, because of the reduced fracture toughness of the composites. Extruded materials showed higher threshold and critical values than the cast materials.