• Journal of Nutrition and Health
• /
• 제36권7호
• /
• pp.684-690
• /
• 2003

This study has investigated the bioavailability of calcium in eggshell powder (ESP) for the purpose of reutilizing eggshells as the calcium source. The experiment was designed 2 ${\times}$ 2 factorial method with two sources, CaCO$_3$ and ESP, and two levels, 0.2% and 0.4% calcium. Weanling SD rats were assigned randomly to one of 4 groups and provided by one of the isocaloric, 20% casein based 4 different experimental diets for 4weeks. Deionized water was given and environment was kept from any contamination of minerals. The body weight, diet intake, feed efficiency ratio (FER), bone growth, Ca contents of bones, and apparent absorption were measured. FER (0.38 - 0.40) and kidney weight were not different among groups and the weight and length, Ca content, strength of two bones Tibia and Femur were not affected by Ca sources except Femur Ca content. Ca content of Femur was greater in ESP groups than that of CaCO$_3$ groups. The body weight gain, bone growth, the Ca contents and strength of bones were significantly greater in 0.4% calcium groups suggesting 0.2% calcium is not sufficient for the optimum growth in the growing rats. These results indicate that ESP be a proper Ca source comparable or superior to CaCO$_3$. However the apparent absorption rate of final 3 days of feeding did not support the observed results showing lower rate in ESP than CaCO$_3$ groups. Further study be needed in the absorption aspect.

• Journal of Plant Biotechnology
• /
• 제6권2호
• /
• pp.103-106
• /
• 2004

Plantlet regeneration from the shoot apex was studied in three different genotypes of the chinese yam (Dioscorea opposita Thunb) cv. Jnagma and Danma, Dunggunma. The effects of plant growth regulators and inorganic salts concentration of the culture medium on bud induction and shoot growth were examined. The combinations of 0.2 mg/L BAP + 0.2mg/L kinetin, 0.01mg/L NAA + 0.2 mg/L kinetin and a single treatment of 0.2mg/L BAP were equally effective for bud and shoot formation from the shoot apices in the three cultivars. Auxin (2,4-D, NAA) treatment enhanced calli formation from the cultured apices. Also, the shoot apices of the cv. Dunggunma produced more callus and buds on the culture medium (MS) containing 0.05mg/L NAA and 0.5-1.0mg/L SAP. Lower salt strength of medium inhibited shoot elongation but did not have much effect on the shoot and bud induction from the shoot apices. These results will be useful to obtain disease-free plants of the Chinese yam.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.145-151
• /
• 2004

According to the development of the aircraft industry, the fatigue strength of Aluminum Alloy becomes a great important material, but it seems that we don't understand an effect on the crack growth behaviour very well. This thesis is not only studied about the five kinds of 2017-T3, 2023-T3, 5083-0, 7075-T6, 7N01-T6 among the Aluminum Alloy which are the main materials of the aircraft, but also small or large relations against the fatigue strength of them. The consequence of the research was being progressed the accordance with the order. That is, The order is 2024-T3> 2017-T3> 7N01-T6> 7075-T6> 5083-0. These inclusion came out the acceleration phenomena in the crack growth behaviour among the high ${\Delta}K$ section Nevertheless I figured out their effects were being ignored at the 2b step.

• 오토저널
• /
• 제8권1호
• /
• pp.40-51
• /
• 1986

A study has been made of the corrosion fatigue of high strength low alloy steel in 3.5% NaCl solution under tension stress for solution temperature being 25.deg. C, 55.deg. C and 85 .deg. C. The main results obtained are as follows; 1) The corrosion fatigue crack growth rate curve could be divided into the First Region, the Second Region and the Third Region. 2) The corrosion fatigue crack growth rates in the First Region and the Second Region were Arrhenius temperature-dependent in this test range. The apparent activation energies for the corrosion fatigue cack growth rate were found to be 2000cal/mol in the First Region and 3700 cal/mol in the Second Region. 3) Hematite (Fe$_{2}$O$_{3}$) as the hexahedral crystal and magnetite (Fe$_{3}$O$_{4}$) as the octahedral crystal were observed in the corrosion products on the corrosion fatigue fracture surface at 85.deg. C and the anode fusion seem to be generated in the crack tip region at high temperature. 4) The complex environment effect ratio which was defined by the ratio of fatigue crack growth rate in corrosion environment to that in air might be considered not only a criterion estimating the effect of environment quantitatively but also an important parameter in the selection of the design stress for the fail safe design. The complex environment effect was not greater than ten in this test.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.9-15
• /
• 2017

IMicrostructure evolution and tensile property in the weld heat-affected zone (HAZ) of austenitic Fe-30Mn-9Al-0.9C lightweight steels were investigated. Five alloys with different V and Nb content were prepared by vacuum induction melting and hot rolling process. The HAZ samples were simulated by a Gleeble simulator with welding condition of 300kJ/cm heat input and HAZ peak temperatures of $1150^{\circ}C$ and $1250^{\circ}C$. Microstructures of base steels and HAZ samples were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and their mechanical properties were evaluated by tensile tests. The addition of V and Nb formed fine V and/or Nb-rich carbides, and these carbides increased tensile and yield strength of base steels by grain refinement and precipitation hardening. During thermal cycle for HAZ simulation, the grain growth occurred and the ordered carbide (${\kappa}-carbide$) formed in the HAZs. The yield strength of HAZ samples (HAZ 1) simulated in $1150^{\circ}C$ peak temperature was higher as compared to the base steel due to the formation of ${\kappa}-carbide$, while the yield strength of the HAZ samples (HAZ 2) simulated in $1250^{\circ}C$ decreased as compared to HAZ 1 due to the excessive grain growth.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3155-3160
• /
• 2010

최근 자동차 산업은 고효율 자동차의 개발에 박차를 가하고 있으며 이에 따라 차체 경량화 및 내식성 방지를 위한 고강도강 및 도금강의 사용이 증가하고 있다. 이에 따라 본 연구에서는 자동차 차체에 쓰이는 3종의 다른 강판에 대하여, 겹침 순서에 따른 용접 특성을 시뮬레이션 기법을 이용하여 분석하였다. 자동차 차체에 많이 사용되는 EDDQ 급의 도금강판 0.7t와 인장강도 440 MPa급의 440R 1.2t, 그리고 AHSS (Advanced High Strength Steel)인 DP 590 0.2t 판재에 대하여 겹치기 순서에 따른 용접 특성을 시뮬레이션 하였고, 너겟 성장 곡선 및 전류에 따른 너겟의 크기로 그 용접성을 분석하였다. 또한 용접 시 발생되는 각 접촉부의 접촉저항을 이용하여 겹침순서에 따른 너겟의 크기를 분석하였으며, 이를 통해 최적의 겹치기 순서를 제안할 수 있었다.

• 한국약용작물학회지
• /
• 제9권1호
• /
• pp.62-67
• /
• 2001

본 실험의 목적은 생물반응기를 이용한 현삼 종묘의 기내증식과 기내순화에 관여하는 적정 배지조건을 검토하여 추후 종묘의 건전한 생육과 안정적 생산에 활용할 수 있는 기초자료를 얻고자 하였으며 얻어진 결과는 다음과 같다. 1. 생물반응기에서 4주간 배양한 신초의 발근과 생장은 1X MS 액체배지에서 양호하였으나 6주간 배양한 신초는 1/10 MS 배지에서 좋았다 2. MS 고체배지에서의 잎 전개율은 생물반응기에서 6주간 배양한 신초가 4주간 배양한 신초보다 높았다. 3. 잎이 전개된 신초의 수와 신초당 잎의 수는 1X MS 고체배지에서 많았으나 유리화도 1/2X MS 고체 배지에서 보다 많이 발생하였다. 4. 전반적으로 보아 신초의 지상부 생육은 MS 기본배지에서 양호하였으나 지하부 생육은 암모니아 태 질소를 1/4로 줄인 배지에서 좋았다. 5. 암모니아태 질소를 1/4로 줄이고 아가농도를 1.2%로 조정한 배지에서 신초의 생육이 좋았으나 유리화가 많이 발생하였다. 6. 신초의 생육과 순화는 1X MS배지에 1.6% 아가농도가 좋았으나 1/2X MS에 1.2%의 아가를 첨가한 경우보다 유리화가 많이 나타났기 때문에 신초의 순화는 1/2 MS 기본배지에 아가농도를 1.2%로 한 배지가 가장 적합한 것으로 생각되었다.

• Archives of Pharmacal Research
• /
• 제28권11호
• /
• pp.1311-1316
• /
• 2005

To better define the relationship between dermal regeneration and wound contraction and scar formation, the effects of epidermal growth factor (EGF) loaded in collagen sponge matrix on the fibroblast cell proliferation rate and the dermal mechanical strength were investigated. Collagen sponges with acid-soluble fraction of pig skin were prepared and incorporated with EGF at 0, 4, and 8 $\mu$g/1.7 $cm^{2}$. Dermal fibroblasts were cultured to 80$\%$ confluence using DMEM, treated with the samples submerged, and the cell viability was estimated using MTT assay. A deep, $2^{nd}$ degree- burn of diameter 1 cm was prepared on the rabbit ear and the tested dressings were applied twice during the 15-day, post burn period. The processes of re-epithelialization and dermal regeneration were investigated until the complete wound closure day and histological analysis was performed with H-E staining. EGF increased the fibroblast cell proliferation rate. The histology showed well developed, weave-like collagen bundles and fibroblasts in EGF-treated wounds while open wounds showed irregular collagen bundles and impaired fibroblast growth. The breaking strength (944.1 $\pm$ 35.6 vs. 411.5 $\pm$ 57.0 Fmax, $gmm^{-2}$) and skin resilience (11.3 $\pm$ 1.4 vs. 6.5 $\pm$ 0.6 mJ/$mm^{2}$) were significantly increased with EGF­treated wounds as compared with open wounds, suggesting that EGF enhanced the dermal matrix formation and improved the wound mechanical strength. In conclusion, EGF-improved dermal matrix formation is related with a lower wound contraction rate. The impaired dermal regeneration observed in the open wounds could contribute to the formation of wound contraction and scar tissue development. An extraneous supply of EGF in the collagen dressing on deep, $2^{nd}$ degree-burns enhanced the dermal matrix formation.

• 생물환경조절학회지
• /
• 제9권2호
• /
• pp.79-84
• /
• 2000

Thymus속의 common thyme과 thyme의 담액수경 재배시 배양액의 이온농도를 달리하여 두 종의 생육과 품질을 비교하였다. 배양액의 이온농도는 1.2, 2.4, 4.8 그리고 $7.2mS.cm^{-1}$로 하였다. 두 종 모두 $0.5(EC=1.2\;mS.cm^{-1})$배와 1배의 낮은 이온농도 처리에서 생육이 좋았다. Common thyme과 lemon thyme의 생육은 배양액내 이온농도가 높아질수록 건물율은 증가했으나 초장, 근장과 생체중은 감소하였다. 엽록소 함량은 lemon thyme에서 더 높았으나 비타민 C의 함량과 정유함량은 common thyme에서 더 높았다. 두 종간의 주요 정유 성분 차이를 보면, common thyme의 주성분은 thymo과 carvacrol이고, lemon thyme은 geranio과 ${\alpha}-citral$로 각각 정유 성분의 50~70%를 차지하고 있다. 이들의 각 주성분의 함량은 생육이 좋았던 0.5배에서 가장 많았다. 결과적으로 수경재배시 common thyme과 lemon thyme 모두 허브 배양액 0.5배액으로 재배시 우수한 품질의 작물을 생산할 수 있었다.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.37-42
• /
• 2005

Most of the welding steel plate structures have complicated mechanical problems such as rolling directional characteristics and residual stresses caused by manufacturing process. For the enhancement of reliability and safety in those structures, therefore, a systematic investigation is required. SS400 steel plate used for common structures was selected and welded by FCAW butt-welding process for this study, and then it was studied experimently about characteristics of fatigue crack propagations with respect to rolling direction and welding residual stress of welded steel plates. When the angles between rolling direction and tensile loading direction in base material are increased, their ultimate strength not show a significant difference, but yielding strength are increased and elongations are decreased uniformly. It is also shown that fatigue crack growth rate can be increased from those results. When the angles between welding bead direction and loading direction in welded material are increase, fatigue crack growth rate of them are decreased and influenced uniformly according to the conditions of residual stress distribution. In these results, it is shown that the welded steel plate structures are needed to harmonize distributed welding residual stress, rolling direction and loading direction fur the improvement of safety and endurance in manufacture of their structures.