• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.482-490
• /
• 1999

7000 series Al alloy with good mechanical properties has been focused with tendency to reduce the components weight of aircraft and automobile. However, it is difficult to manufacture a sound extruded product because of segregation, grain growth, casting defect, surface defect, decreasing extrudability and so on. The objective of this study is to manufacture a new 7000 al alloy more than the extrudability of A7N01 and A7003 through controlling the weight (%) Mg, Zn, Si. Hot extrusion experiments on the axisymmetric rod are performed in 500℃ and also performed analysis of the same process using unmerical analysis method, a coupled rigid-thermoviscoplastic finite element method. Extrusion limit diagram was obtained for the developed alloy by FE-simulation in order to define the relationship of extrusion speed and initial billet temperature.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.17-23
• /
• 2009

The purpose of this study is possibility of the heavy rainfall prediction using instability index. The convective instability index using this study is Convective Available Potential Energy(CAPE) concerned the growth energy of the storm, Bulk Richardson Number(BRN) concerned the type and strength of the storm, and Sotrm Relative Helicity(SRH) concerned maintenance of the storm. To verify the instability index, the simulation of heavy rainfall case experiment by Numerical Weather Prediction(NWP) model(MM5) are designed. The results of this study summarized that the heavy rainfall related to the high instability index and the proper combination of one more instability index made the higher heavy rainfall prediction.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.12-16
• /
• 2011

최근 정부의 녹색성장(Green Growth) 정책으로 대규모의 풍력발전소 단지가 배전계통에 적극적으로 도입, 운용되고 있다. 풍력발전기의 대표적인 타입 중에 DFIG(Doubly-Fed Induction Generation)는 MSC와 GSC라는 2가지 요소로 구성된다. MSC(Machine-Side Converter)는 발전량을 이용하여 발전기의 토크 또는 회전속도를 제어하며, 발전기에 여자 전류를 공급함으로써 고정자에서 유입되는 무효전력 제어를 담당한다. 그리고 GSC(Grid-Side Converter)는 전력변환 장치의 직류단 전압을 제어하고, GSC와 배전계통 사이의 무효전력도 제어한다. 본 논문에서는 상기의 이론을 바탕으로 PSCAD/EMTDC를 이용한 DFIG 모델링을 수행하여, 다양한 Simulation으로 모델링의 유효성을 확인하였다.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.9-13
• /
• 2004

To confirm the previous finding that FDS predicts a fire growth rate too rapid compared with an experiment in a center fire in a room with an opening, the same computational fluid dynamics was applied to two types of fires, wall fire and comer fire. First the grid size was chosen to eliminate possible numerical errors due to a coarse grid system. Then the two types of fires were simulated for three different fire sizes, 7.65, 21.25, and 51.57kW for each type, which are the same as in the experiment to be compared with. The fires were predicted to grow too fist although the average temperatures and heights of the neutral planes were in good agreement with measurement.

• Korean System Dynamics Review
• /
• v.16 no.3
• /
• pp.31-48
• /
• 2015

The purpose of this paper is to simulate drinking population, an alcoholic abuser and an alcoholic through therapy programs and system dynamic model. Then we try to research relationship between an alcoholic crime and related therapy programs. The results of the model simulation were consistently increased drinking population and 3 types drinkers until 2020 years. Specially the growth rate of drinking abusers will be passing that of a drinking population. Second, It showed clearly the decreasing effects of drinking crime on therapy programs(clinical treatment, preventive displine and counseling treatment). Finally, it will be positvely necessary the long-term and various alcoholic therapy program for reducing the ratio of drinking abusers and an alcoholic. In the second place, government and medical centers must be established a concrete information systems for collecting alcoholic datum.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.62-76
• /
• 1995

The safety analysis becomes very essential in the crash environment with the growth of automobile industry. Recently, an airbag system is required to protect the occupant. The effects of an airbag can be evaluated exactly from the barrier or sled test which is quite expensive. The airbag system in a passenger car is analyzed with the occupant analysis program. The modeling of the passenger car including an airbag is established and the results are verified by comparisons with real crash tests. However, the solution of an airbag design can not be obtained easily with the conventional method such as an optimization due to the nonlinearity and complexity of the problem. An iterative design algorithm using the orthogonal array is proposed to overcome the difficulties. The design trend of an airbag is recommended to minimize the injury of an occupant with the proposed design algorithm and the results are discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.268-274
• /
• 2007

In general, rocket or satellite circuit designers focus on reducing temperature of electronic devices in order to enhance electronic unit's reliability. This paper describes the quantitative analysis result of activation energy as well as device temperature effects to the system reliabilities. The quantitative analysis result shows that activation energy of device has more effects on system reliability than temperature does. And this paper suggests a strategy for enhancement of reliability during devices placement on PCB with simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5174-5190
• /
• 2016

Recent years have witnessed an explosive growth of mobile devices, mobile cloud computing services offered by these devices and the remote clouds behind them. In this paper, we noticed ultra-low latency service, as a type of mobile cloud computing service, requires extremely short delay constraints. Hence, such delay-sensitive applications should be satisfied with strong QoS guarantee. Existing solutions regarding this problem have poor performance in terms of throughput. In this paper, we propose an end-to-end bandwidth resource reservation via software defined scheduling inspired by the famous SDN framework. The main contribution of this paper is the end-to-end resource reservation and flow scheduling algorithm, which always gives priority to delay sensitive flows. Simulation results confirm the advantage of the proposed solution, which improves the average throughput of ultra-low latency flows.

• 연구논문집
• /
• s.33
• /
• pp.123-135
• /
• 2003

Using the residence time calculated by computer simulation for temperature and gas velocity distribution in CVC reactor, the kinetics on the formation of $TiO_2$ nano powder was analyzed for coagulation process, After abrupt increase of particle size at initial growth stage (< 0.2 $\mus$ ), the particle grew in proportion of cubic root to time. The numerically calculated particle sizes well agreed with the experimental results. However, the coarse rutile $TiO_2$ powders having the particle size of over 40 nm were formed on the surface of quratz rod in the reactor. it is thought that the fine anatase particles condensed on quratz rod were sintered in a heated CVC reactor to grow and transform to coarse rutile phase, and the critical size for phase transformation anstase-to-rutile was around 25 nm tn this study.

• Molecules and Cells
• /
• v.25 no.3
• /
• pp.397-406
• /
• 2008

Computational modeling of signal transduction is currently attracting much attention as it can promote the understanding of complex signal transduction mechanisms. Although several mathematical models have been used to examine signaling pathways, little attention has been given to crosstalk mechanisms. In this study, an attempt was made to develop a computational model for the pathways involving growth-factor-mediated mitogen-activated protein kinase (MAPK) and phosphatidylinositol 3'-kinase/protein kinase B (PI3K/Akt). In addition, the dynamics of the protein activities were analyzed based on a set of kinetic data. The simulation approach integrates the information on several levels and predicts systems behavior. The in-silico analysis conducted revealed that the Raf and Akt pathways act independently.