• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1230-1237
• /
• 2018

Objective: The present study was undertaken to determine an optimal balance between the amount of physically effective neutral detergent fiber (peNDF) to metabolizable glucose (MG) on rumen fermentation, blood metabolites and growth performance of 8 to 10-month-old heifers. Methods: A total of 15 healthy Holstein heifers weighing an average of 256 kg (8 month of age) were randomly assigned to three groups of five. Treatment diets consisted of the following three $peNDF_{8.0}/MG$ levels: 1.46 (Treatment A), 1.74 (Treatment B), and 2.08 (Treatment C). Results: The results showed that the ratio of $peNDF_{8.0}/MG$ affected rumen fermentation, blood metabolites and growth performance of heifers. The average daily gain of heifers tended to decrease as the ratio of $peNDF_{8.0}/MG$ increased (p = 0.07). The concentrations of blood urea nitrogen, triglyceride, and cholesterol increased significantly (p<0.05), while the high-density lipoprotein concentration decreased (p<0.05). After feeding 2 h and 4 h, insulin concentration in Treatment A was greater than Treatment C (p<0.05). Propionate concentration had decreasing trend (p = 0.07); acetate to propionate ratio and non-glucogenic to glucogenic volatile fatty acid (NGR) increased significantly (p<0.05). In addition, the digestibility of dry matter, crude protein, neutral detergent fiber, and acid detergent fiber decreased significantly (p<0.05). Conclusion: The present investigation indicated that dietary $peNDF_{8.0}/MG$ ratio can affect the growth and development, blood metabolites, rumen fermentation and apparent digestibility of heifers, and the optimal dietary $peNDF_{8.0}/MG$ ratio for 8 to 10-month-old heifers in the present study was 1.46.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.271-279
• /
• 2012

9-12% Cr steels have been used in thermal power plants which repeat start and stop operations. Major factors of fatigue life are temperature, frequency, stress ratio, holding time, microstructure, and environment. Normally, fatigue life decreases at high temperature, low frequency, high stress ratio, and long holding time conditions. A Mod.9Cr-1Mo steel, called G91, was developed at ORNL (Oak Ridge National Laboratory, USA) and was adopted as a high-temperature structural material in the ASME Code in 2004. However, its low-cycle fatigue and fatigue crack growth characteristics have been rarely studied. In this work, we have investigated the low-cycle fatigue crack growth behaviors of G91 steel under various test conditions in terms of temperature and stress ratio. As temperature and stress ratio increase, the crack growth rate becomes faster and striation distance also increases. On the other hand, the number of branch cracks decreases.

• 한국방사선학회논문지
• /
• 제15권5호
• /
• pp.649-656
• /
• 2021

본 연구는 태아의 자궁 내 성장제한을 평가하는 변수로 소뇌횡직경과 복부둘레비(TCD/AC ratio)의 적절성을 평가하고자 하였다. 2019년 4월부터 2021년 3월까지 부산소재 I 병원에서 정기검진으로 초음파를 실시한 784명의 임산부를 대상으로 진행하였으며 소뇌횡직경과 복부둘레 측정값을 통해 후향적으로 분석하였다. 단순회귀분석에서 임신주수에 소뇌횡직경은 97.2%, 복부둘레는 97.5%의 영향력을 보였으며(p<0.001) 정상태아의 TCD/AC ratio는 임신주수에 상관없이 13.2로 결정되었다. 또한 빈도분석을 통해 임신주수 그룹별 TCD/AC ratio의 백분위수를 산출하였으며 자궁 내 성장제한 예측의 95 백분위수는 14.2로 나타났다. 결과적으로 TCD/AC ratio는 태아의 정상적인 성장을 평가하고 IUGR을 예측하는 유용한 변수로 활용될 수 있을 것으로 사료된다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.92-97
• /
• 1996

The fatigue crack propagation behavior in SA106 Gr.C main steam pipe weld joint was investigated in air environment. Crack growth rate tests were conducted on base metal and weld metal at load ratio of 0.1 and 0.3 and at frequency of 10Hz. The fatigue crack growth rates of the base metal and the weld metal were above the ASME reference line and the fatigue crack propagation rate of the weld metal was higher than those of the base metal. Fatigue crack growth rate increased with increasing the load ratio and the effect of the load ratio was more significant in the weld metal. The post weld heat treatment increased the fatigue crack growth rates of the base metal by reducing compressive residual stress and decreased those of the weld metal by reducing weld defects.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.153-158
• /
• 2000

Atomic Force Microscope (AFM) was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths (SW) and heights $(SH,\;SH_h)$ were measured from the cross sectional Profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) Coincidence of the crack growth rate with the striation width was found down to the growth rate of $10^{-5}$ mm/cycle. (2) The relation of $SH={\alpha}(SW)^{1.2}$ was obtained. (3) The ratio of the striation height to its width SH/SW and did not depend on the stress intensity factor range ${\Delta}K$ and the stress ratio R. From these results, the applicability of the AFM to nano-fractography is discussed.

• 한국미생물·생명공학회지
• /
• 제22권6호
• /
• pp.565-570
• /
• 1994

The pullulan production and morphological change of Aureobasidium pullulans ATCC 9348 were investigated both in batch fermentation and in continuous fermentation. The best carbon source for pullulan production was sucrose among seven different carbon sources. The pullulan production of A. pullulans was increased with increasing the carbon to nitrogen ratio of the medium using sucrose as a carbon source. In batch fermentation, production of pullullan occurred following exhaustion of the nitrogen source from the medium. The continuous fermentation showed that the pullulan production was closely parallelled with cell growth and was most effective at a dilution rate of 0.06~0.07 hr$^{-1}$-. The ratio of yeast-like cells(blastospores) of A. pullulans increased with the increase of growth rate, and reached 100% over the growth rate of 0.07 hr$^{-1}$. The growth rate, within a certain range, affected not only on the cell morphology, but on the specific pullulan productivity of A. pullulans.

• The Korean Journal of Ecology
• /
• 제5권2_3호
• /
• pp.123-131
• /
• 1982

The growth and the resistance of Amorpha fructicosa L. under water control was experimented in frames out of doors. The plant grew in a wagner's pot under water control. The soil moisture content was controlled at 5%, 10%, 15% and 20%. The growth of leaf, stem and root in the groups of 5% and 10% soil moisture content were different from values in the groups of 15% and 20%. The T/R ratio in the groups of 5% and 10% soil moisture content were different from the ratio in the groups of 15% and 20% soil moisture content. The T/R ratio of former was lower than the latter, but the C/F ratio of the former was higher than the latter. RGR and NAR of Amorpha fructicosa decreased in 5% and 10% soil moisture content but increased in 15% and 20% soil moisture content during growing period. The maximum values of RGR and NAR were respectively 0.089 and 0.080 at 20% soil moisture content. The highest value of LAR was 1.560 at 5% soil moisture content. RGR and NAR were comparatively affected by soil moisture content.

• 한국자원식물학회지
• /
• 제11권2호
• /
• pp.131-135
• /
• 1998

Cathamus tinctorius, Coptis japonica and Asarum sieboldii were tested as substrate for the production of Flammulina velutipes. Among the C. tinctoris , C. japonica and A. sieboldii , C. tinctoris was the best substrate for the production of fruitbody. The effects of addition of C. tinctoris to sawdust substrate resulted in the increased mycelial growth on inoculum culture, 3.1% in ratio of fully culture and shorted one day in culture period. C. tinctoris was decreased 6.1% in ratio of fully culture, 11.0% in ratio of fruitbody productive culm. The addition of C.tinctoris, C.japonica to sawdust substrate increased 134.6%, 114.1% on the yield of the mushroom fruitbody respectively . But A. sieboldii decreased the mycelial growth and pineheading ratio delayed the production of fruitbody.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.446-450
• /
• 2013

Growth mechanism of GS-MBE(Gas source-Molecular Beam Epitaxy) has been investigated. We observed that the growth rate of GaN films is changing from 520 nm/h to 440 nm/h by the variation of V/III ratio under nitrogen-rich growth condition. It was explained that the amount of hydrogen on the growth front varies by the ammonia flow, and gallium hydrides are generated on the surface by a reaction of hydrogen and gallium, resultantly the amount of gallium supplying is changing along with the $NH_3$ flow. Reflection high energy electron diffraction (RHEED) observation was used to confirm the N-rich condition. The crystal quality of GaN was estimated by photoluminescence (PL) and X-ray diffraction (XRD).

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.699-705
• /
• 2020

This study aims to examine the antecedent factors of debt policy on the influence of firm growth on firm value. There was a total of 19 companies involved accounting for 95 observational data from a population of 169 companies listed on the Kompas 100 Index of the Indonesia Stock Exchange from 2014 to 2018. The data were analyzed through descriptive statistics, classic assumption tests, multiple regression, and hypothesis testing. The results prove that the firm growth, proxied by asset growth or sales growth, did not have a significant influence on the debt policy. Further, there was no significant influence of debt policy on firm value when using debt ratio and also dividend policy as a control variable. In contrast, there was a positive and significant influence on the firm value when using debt to equity ratio proxy, both with or without using the control variable. Therefore, the debt policy was not proven as an antecedent on the influence of firm growth on firm value. This finding implies that there was a tendency for the company management to adopt the policy, which would increase the debt ratio to increase the investors' confidence in the stock market and investors neglect the company's dividend policy.