• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1437-1449
• /
• 2023

The purpose of this study is to analyze whether pervious and impervious areas in urban areas affect tree growth. In order to determine the differences in the growth of six species of trees planted simultaneously, the effects of pervious and impervious surfaces on tree growth were analyzed using the Normalized Difference Vegetation Index (NDVI) produced using Sentinel-2 and sub-divided land cover map from the Ministry of Environment. For this purpose, the Geospatial eXplainable Artificial Intelligence(GeoXAI) concept was applied. As a result of the analysis, the explanatory power of the model was found to be the best when considering the area of land cover included in the 10m range for Pinus densiflora, the 20 m range for Zelkova Serrata, Metasequoia glyptostroboides, and Ginkgo biloba, the 30 m range for Platanus occidentalis, and the 40 m range for Yoshino cherry trees. In addition, the wider the pervious area, the more active the growth of trees,showing a positive correlation, and the wider the impervious area, such as nearby artificial ground, showed a negative correlation with tree growth. This shows that surrounding pervious and impervious areas affect the growth of trees and that the scope of influence varies depending on the tree species.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.4
• /
• pp.47-55
• /
• 2016

Purpose: Growth and change are the most important things in planning of hospital architecture. It is especially necessary for countless changes taken place since the hospital opens to be adapted to the planning of hospital architecture phase. The space depth in the hospital serves a very crucial role in accepting these changes. The purpose of this study is to provide basic data necessary to space depth planning to prepare for change through analyzing space depth's change in hospital architecture chronologically. Methods:: The method of this study is analyzing space depth's change in cases of 19 hospitals in total, from the 1980's, which is the quantitative growth period, until recently. Especially this study is analyzing Max & Min space depth focusing change of medical environment. Based on this, this study suggests an form of space depth and optimum range of space depth response to growth and change of hospital architecture. Results: The conclusions of this study are as follows. Considering these conclusion, double linear system is most appropriate for space depth for hospital architecture planning focused on system. Optimal range of space depth is at least 21.6m or more in case of clinic room and from 27 meter to 37meter in case of examination & treatment room. Implications: Space of Depth is a key element determining system for hospital architecture planning focused on system. The results of this paper can be data for planning system of hospital architecture which copes with the change.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.768-778
• /
• 1996

Iron oxide (hematite, $\alpha$-${Fe}_{2}{O}_{3}$) particles were prepared directly from aqueous solution using a crystal growth controller. Paticles properties and reaction mechanisum of products as a function of basicity, formation process and mechanism of needle-lkie hematite were investigated. hexagonal hermatite particles were formed in teh range below pH 9.0, ellipsoidal or rectangular hematite particles in the range of pH 10.75-11.75 respectively. In the range above pH 12.50, acicular $\alpha$-FeOOH was formed. Basicity of product solution produced in the range of pH 10.7511.75 was increased slightly as compared with basicity of reastants due to hydroxly ion(OH-) formed by dissociation crystal growth controller. Citric acid which is acted as a crystal growth controller was adsorbed in the form of itrate anion(R-COO-) on the ferric hydroxide and exerted important role on the formation to the needle-like $\alpha$-${Fe}_{2}{O}_{3}$ particles in this reaction system.

• Journal of Yeungnam Medical Science
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2005

Normal growth and development is of prime concern during childhood. The treatment of children with growth hormone deficiency has been revolutionized by growth hormone therapy. An improved height outcome with a final height within the target height range has been achieved. However, close follow-up with regular clinical and laboratory monitoring is essential for achieving the desirable height outcome. The theoretical unlimited supply of growth hormone has led to its wide spread use in a variety of disorders other than a growth hormone deficiency. Initially used in children with Turner syndrome, growth hormone is now used to treat chronic renal failure, an idiopathic short stature and intrauterine growth restrictions in addition to a wide array of newly emerging indications. This review summarizes the basics for a proper growth assessment, the differentiation of normal and abnormal growth causes of a short stature, and the indications for growth hormone treatment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.247-253
• /
• 2003

In this study, a numerical analysis of the deposition of gallium arsenide from TMGa and arsine in a horizontal MOCVD reactor is performed to investigate the effect of inlet diffuser shape of reactor on the flow and deposition characteristics. The effects of two geometric parameters (diffuser angle, diffuser shape) on the growth rate, growth rate uniformity, flow uniformity and pressure loss are presented. As a results, it is found that the optimum linear diffuser angle is in the range of $50^{\circ}$∼$55^{\circ}$ and parabolic diffuser in the range of $40^{\circ}$∼$45^{\circ}$ from the viewpoint of growth rate uniformity, flow uniformity and average growth rate. It is also found that variation of diffuser angle has greater impact on growth rate uniformity than average growth rate particularly in parabolic diffuser.

• Korean Journal of Microbiology
• /
• v.15 no.3
• /
• pp.123-130
• /
• 1977

In previous paper, it was reported that antibiotic substance such as tetracycline and streptomycin were produced by S'. albus subsp. and S'. globosus. And increase of mycelial growth of two strains, antibiotic production, and changes of pH range are extended to approximately 110-130 hrs in fermenting medium, there-after they decreased with culture period exception of pH range. Two Streptomyces spp. required commonly 4-5% starch as carbon sources and 1.5-2.0% soybean meal as nitrogen sources. However, 0.005-0.01M potassium phosphate dibasic, calcium carbonate (6mg/ml in S.albus subsp. and 2mg/ml in S. globosus), 0.01-0.03M, magnesium sulgate and 0.01M ferric chloride showed as optimal concentration for the growth of 2 strains. Mineral compoments such as zinc, manganese, cobalt, sodium and copper at the level of 10/sup -4/ -10/sup -6/M were observed. Especially, zinc ion showed toxicity to the growth of 2 strains at 0.005M. In relation with pH, there is a little difference in mycelial growth with cultural initial pH.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.81-87
• /
• 1991

We propose the crack growth rate equation which will model fatigue crack growth rate behavior such that constant stress amplitude fatigue crack growth behavior can be predicted. Constant stress amplitude fatigue tests are conducted for four materials under three stress ratios of R＝0.2, R＝0.4 and R＝0.6. Materials which have different mechanical properties i.e. stainless steel, low carbon steel, medium carbon steel and aluminum alloy are used. Through constant stress amplitude fatigue test by using unloading elastic compliance method, it is confirmed that crack closure is a close relationship with fatigue crack propagation. We describe simply fatigue crack propagation behavior as a function of the effective stress intensity factor range ($\Delta$ $K_{eff}$＝U .$\Delta$K) for all three regions (threshold region, stable region). The fatigue crack growth rate equation is given by da / dN＝A($\Delta$ $K_{eff}$­$\Delta$ $K_{o}$ )$^{m}$ / ($\Delta$ $K_{eff}$­$\Delta$K) Where, A and m are material constants, and $\Delta$ $K_{o}$ is stress intensity factor range at low $\Delta$K region. $K_{cf}$ is critical fatigue stress intensity factor.actor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1364-1370
• /
• 2002

The objective of this study was to examine the effect of compensatory growth nutritional regimen on mammary gland growth and lactation. One hundred twenty-two Sprague Dawley female rats (35 days of age) were randomly assigned to either a control or a stair-step compensatory nutrition (SSCN) feeding regimen or an alternating 2-2-3-3-week schedule beginning with 40% energy restriction for 2 weeks followed by re-alimentation (control diet) for 2 weeks. Pup weight gain and milk yield were improved 8% and 8 to 15%, respectively, by the SSCN regimen. The gene expression of $\beta$-casein was 2.3-fold greater in the SSCN group than in the control group during early lactation, but they were greater at all stages of the second lactation. The gene expression of insulin-like growth factor-I was 40% lower in the SSCN group than in the control group during early lactation of the second lactation, but during late lactation it was 80% greater than in the control group. The concentration of serum corticosterone tended to be higher in the SSCN group during the late stage of the first lactation. These results suggest that the stair-step compensatory nutrition regimen improves lactation performance and persistency by modulation of cell differentiation and apoptotic cell death.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.130-139
• /
• 1996

The silicon carbide particles reinforced aluminium 6061($SiCp/A\ell$) composites are generally known have wild range of applications from automobiles to airospaces. But, by the results of existing study for $SiCp/A\ell$ composites, there are reports that the fatigue life of $SiCp/A\ell$ composites has improved than $A\ell$matrixes and has not improved then $A\ell$ matrixes. Consequently, in order to perform the reliable life prediction for $SiCp/A\ell$, the properties of probability distribution of fatigue crack initiation life & fracture life, crack growth length in constant number of cycles, crack growth rate in constant stress intensity factor range and m & C value in Paris's fatigue crack growth law and the estimation of statistical parameters have been evaluated by the statistics method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.141-142
• /
• 2015

Environmental temperature is an important factor that affects the growth of mushrooms. Mushrooms grow well in a certain temperature range, but if mushrooms deviate from the appropriate temperature range, mushrooms growth and development quality will become worse, and even stop growing. In this paper, the status of the mushroom bacteria, the growth of the mycelium, the occurrence of the fruiting bodies and the growth of the fungus were investigated, o as to provide reference for cultivation management technology of mushroom precise cultivation.