• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.131-134
• /
• 2001

Vertically aligned carbon nanotubes are grown on iron-deposited silicon oxide substrates by thermal chemical vapor deposition of acetylene gas at the temperature range 750∼950$^{\circ}C$. As the growth temperature increases from 750 to 950$^{\circ}C$, the growth rate increases by 4 times and the average diameter also increases from 30 nm to 130 nm while the density increases progresively with the growth temperature and a higher degree of crystalline perfection can be achieved at 950$^{\circ}C$. This result demonstrates that the growth rate, diameter, density, and crystallinity of carbon nanotubes can be controlled with the growth temperature.

• Mycobiology
• /
• v.42 no.2
• /
• pp.158-166
• /
• 2014

In this study, bacterial strains were isolated from soils from 30 locations of Samcheok, Gangwon province. Of the isolated strains, seven showed potential plant growth promoting and antagonistic activities. Based on cultural and morphological characterization, and 16S rRNA gene sequencing, these strains were identified as Paenibacillus species. All seven strains produced ammonia, cellulase, hydrocyanic acid, indole-3-acetic acid, protease, phosphatase, and siderophores. They also inhibited the mycelial growth of Fusarium oxysporum f. sp. radicis-lycopersici in vitro. The seven Paenibacillus strains enhanced a range of growth parameters in tomato plants under greenhouse conditions, in comparison with non-inoculated control plants. Notably, treatment of tomato plants with one identified strain, P. polymyxa SC09-21, resulted in 80.0% suppression of fusarium crown and root rot under greenhouse conditions. The plant growth promoting and antifungal activity of P. polymyxa SC09-21 identified in this study highlight its potential suitability as a bioinoculant.

• Journal of Plant Biology
• /
• v.25 no.4
• /
• pp.161-168
• /
• 1982

The activities of auxins and cytokinins have been examined in the growth of callus tissue derived from Phaseolus vulgaris L. cv. Damyang. The synthetic auxin, picloram was the most effective in promoting callus growth and the range of effective concentrations (0.1$\mu{M}$ to 32$\mu{M}$) was broad. 2, 4-D also enhanced callus growth at the optimal concentration of 3.2$\mu{M}$. NAA promoted callus growth at relatively higher concentrations than other auxins tested. IAA was less effective in supporting callus growth. Cytokinin bearing saturated side chain ($N^6$-isopentyladenine) was approximately 30 times more active than the corresponding unsaturated compound, $N^6$-($\D^2$-isopentenyl) adenine. The abilities of cytokinin-autonomous growth were also examined. Callus tissues previously grown on concentrations lower and/or higher than optimal concentrations of cytokinins were better habituated in the subsequent passage. It was suggested that the development of cytokinin autonomy may be related to dosage-concentrations of cytokinin in the previous passage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.527-531
• /
• 2005

Fully coherent self-assembled InAs quantum dots(QDs) grown on Si (100) substrates by atmospheric pressure metalorganic chemical vapor deposition(APMOCVD) were grown and the effect of growth conditions such as growth rate and growth time on quantum dots' morphology such as densities and sizes was investigated. InAs QDs of 30 - 80 nm in diameters with densities in the range of (0.6 - 1.7) x $10^{10}\;cm^{-2}$ were achieved on Si substrates and InAs layer was changed from 2 dimensional growth to 3 dimensional one at a nominal thickness less than 0.48 ML. This is attributed to the higher ambient pressure of APMOCVD suppressing of In segregation from the 2 dimensional InAs layer. This In segregation looked to disturb the dot formation especially when the growth rate was low so that the dots became less dense and bigger as the growth rate was lower.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.797-804
• /
• 2001

To obtain representative fatigue crack growth characteristic curve in residual stress field, fatigue crack growth test was carried out at various stress ratio and fatigue crack growth characteristic curve was represented using crack closure concept. Obtained results are as follows;K(sub)op/K(sub)max was independent of K(sub)max when R was lower than 0.5 and crack closure phenomenon was not observed when R is higher than 0.5. therefore neglecting crack closure behaviour, actual fatigue crack growth rate can be underestimated. Thus, considering crack closure phenomenon, fatigue crack growth characteristics curve of A 106 Gr B Steel weldment can be effectively estimated.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.23 no.1
• /
• pp.28-32
• /
• 2012

Vocal fold scar disrupts structure of lamina propria and causes significant change in vocal fold tissue biomechanics, resulting in a range of voice problems that often significantly compromise patient quality of life. Although several therapeutic management have been offered in an attempt to improve vocal fold scar, the ideal treatment has not yet been found. Recently, several tissue engineering technique for vocal fold scar using growth factors, several cells, and scaffolds have been described in tissue culture and animal models. Several growth factors such as hepatocyte growth factor, basic fibroblast growth factor, and transforming growth factor beta 3 for therapy and prevention of vocal fold scar have been studied. Cell types to regenerate vocal folds in scarring tissue have been introduced autologous or scarred vocal fold fibroblast and adult mesenchymal stem cells. Decellularized organ matrix and several hyaluronic acid materials have used as scaffolds for vocal fold scar.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.47-54
• /
• 1998

Various equipments in plants are welded with two different materials and it is required to investigate the effects of fatigue crack propagation on the neighborhood of a welded portion. The characteristics of fatigue crack growth in the base metal of carbon and stainless steel, in the carbon and stainless steel sides located in the neighborhood of welded portion (carbon/stainless steel), respectively and welded portion, are investigated. The results show that the crack growth in the welded portion (carbon/stainless steel) is an average value of the crack growths in the carbon and stainless steel respectively located in the neighborhood of the welded portion. It is found that the crack growth in the welded portion is not significantly different from those in the carbon and stainless steel sides. Hence it can be concluded that the structure welded with two different materials wold not impede the integrity based on the fatigue crack growth.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2000

In fatigue crack growth test, it is important not only to analyze characteristics of fatigue crack growth but also to determine the threshold stress intensity factor, ${\Delta}K_{th}$. which is the threshold value of fatigue crack growth. Linear regression analysis using fatigue test data near the threshold is suggested to determine the ${\Delta}K_{th}$ in the standard test method but the ${\Delta}K_{th}$ can be affected by a fitting method. And there are some limitations on the linear regression analysis in the case of small number of test data near the threshold. The objective of this study is to investigate differences of the ${\Delta}K_{th}$ due to regression analysis method and to evaluate the relative error range of the ${\Delta}K_{th}$ in same fatigue crack growth test data.

• Journal of the Korean Vacuum Society
• /
• v.9 no.1
• /
• pp.16-23
• /
• 2000

The epitaxial growth of $CeO_2$ films has been investigated on three different substrates-Si(111), $SrTiO_3$(001), and MgO(001)-over wide range of growth parameters using oxygen-plasma-assisted molecular beam epitaxy. Pure-phase, single-crystalline epitaxial films of $CeO_2$ (001) have been grown only on $SrTiO_3$(001). We discuss the growth conditions in conjunction with the choice of substrates required to synthe-size this oxide, as well as the associated characterization by menas of x-ray diffraction, reflection high-energy electron diffraction, low-energy electron diffraction, and x-ray photoelectron spectroscopy and diffraction. Successful growth of single crystalline $CeO_2$ depends critically on the choice of substrate and is rather insensitive to the growth conditions studied in this investigation. $CeO_2$(001) films on $SrTiO_3$exhibit the sturcture of bulk $CeO_2$ without surface reconstructions. Ti outdiffusion is observed on the films grown temperatures above $650^{\circ}C$.

• Mycobiology
• /
• v.36 no.2
• /
• pp.88-92
• /
• 2008

Vegetative growth of four different strains of Hericium erinaceus was observed. The temperature suitable for optimal mycelial growth was determined to be $25^{\circ}C$, with growth observed in the extend temperature range of $20{\sim}30^{\circ}C$. The different strains of this mushroom showed distinct pH requirements for their optimum vegetative growth, with the most favorable growth observed at pH 6. Considering vegetative mycelial growth, PDA, YM, Hennerberg, Hamada, and Glucose peptone were the most favorable media, and Czapek Dox, Hoppkins, Glucose tryptone, and Lilly were the most unfavorable media for these mushroom strains. With the exception of lactose, most of the carbon sources assayed demonstrated favorable vegetative growth of H. erinaceus. For mycelial growth, the most suitable nitrogen source was alanine and the most unsuitable was histidine. Oak sawdust medium supplemented with $10{\sim}20%$ rice bran was the best for mycelial growth of the mushroom.