• Journal of the Korean Society of Visualization
• /
• v.2 no.1
• /
• pp.12-17
• /
• 2004

The physical characteristics of soot near the soot inception point were investigated with various measurements. In-situ measurements of particle size and volume fraction were introduced based on time resolved laser-induced incandescence (TIRE-LII) and laser-induced ion mobility (LIIM). The one has more convenience and accuracy than conventional LII technique and the other works best for particle sizes of a few nanometers at high concentrations in a uniform concentration field. A complementary ex-situ measurement of particle size is nano differential mobility analyzer (Nano-DMA), which recently developed for measuring particle sizes between 2nm and 100nm and provides high-resolution size information for early soot. Particles will be also collected on transmission electron microscope (TEM) grids using rapid thermophoretic sampling and analyzed for morphology. These measurements will allow fresh and original insight into the characterizing soot inception process. The measured physical properties of incipient soot will clarify the controlling growth mechanism combined with chemical ones, and the dominant mechanism for soot modeling can be deduced from the information.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.607-612
• /
• 2008

The groove rolling is a process that transforms the bloom or billet into a shape with circular section through a series of rolling. Inhibition of surface defect generation in groove rolling is a matter of great importance and therefore many research groups proposed a lot of models to find the location of surface defect initiation. In this study, we propose a model for maximum shear stress ratio over equivalent strain to catch the location of surface defect onset. This model is coupled with element removing method and applied to box groove rolling of POSCO No.3 Rod Mill. Results show that proposed model in this study can find the location of surface defect initiation during groove rolling when finite element analysis results is compared with experiments. The proposed criterion has been applied successfully to design roll grooves which inhibit the generation of surface defect.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.12-16
• /
• 2011

최근 정부의 녹색성장(Green Growth) 정책으로 대규모의 풍력발전소 단지가 배전계통에 적극적으로 도입, 운용되고 있다. 풍력발전기의 대표적인 타입 중에 DFIG(Doubly-Fed Induction Generation)는 MSC와 GSC라는 2가지 요소로 구성된다. MSC(Machine-Side Converter)는 발전량을 이용하여 발전기의 토크 또는 회전속도를 제어하며, 발전기에 여자 전류를 공급함으로써 고정자에서 유입되는 무효전력 제어를 담당한다. 그리고 GSC(Grid-Side Converter)는 전력변환 장치의 직류단 전압을 제어하고, GSC와 배전계통 사이의 무효전력도 제어한다. 본 논문에서는 상기의 이론을 바탕으로 PSCAD/EMTDC를 이용한 DFIG 모델링을 수행하여, 다양한 Simulation으로 모델링의 유효성을 확인하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.62-76
• /
• 1995

The safety analysis becomes very essential in the crash environment with the growth of automobile industry. Recently, an airbag system is required to protect the occupant. The effects of an airbag can be evaluated exactly from the barrier or sled test which is quite expensive. The airbag system in a passenger car is analyzed with the occupant analysis program. The modeling of the passenger car including an airbag is established and the results are verified by comparisons with real crash tests. However, the solution of an airbag design can not be obtained easily with the conventional method such as an optimization due to the nonlinearity and complexity of the problem. An iterative design algorithm using the orthogonal array is proposed to overcome the difficulties. The design trend of an airbag is recommended to minimize the injury of an occupant with the proposed design algorithm and the results are discussed.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.204-205
• /
• 2001

Manful algae, Cochlodinium polykrikoides has damaged to fisheries organisms by making massive blooms mainly in the South Sea during the higher water temperature season since 1995 in Korea. Ecological and hydrodynamic studies of the species offer useful information in understanding its bloom mechanism giving promising data for the modeling and prediction of the blooms. (omitted)

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2002.11a
• /
• pp.65-68
• /
• 2002

몇 개 농업관련 시험장에서 북한 벼 품종의 출수반응을 관찰한 결과 북한에서 조생종으로 분류된 품종들은 온도에 민감한 반응을 보여 기준품종인 남한의 오대벼에 비해 출수가 빨랐고, 중생종은 그보다 출수가 늦어 전체적으로 남한 품종의 조만성과 유사하였다 (양 등, 2000). 또한 유전자 분석을 통해 북한품종 및 계통 101개를 남한품종과 비교해 본 결과 40% 유사도 수준에서 남한 품종과 같이 통일형과 자포니까형으로 나눌 수 있었으며, 자포니카형 품종들간 유사도는 80%에 달했다.(정 등, 2001)(중략)

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.938-941
• /
• 2006

Continuous fermentation process for the production of soluble glucan using mutant Agrobacterium sp. ATCC31750 has been developed in this research. When the concentration of soluble glucan was higher than 6 g/l, the viscosity of the fermented broth was too high and it needs complex separation process to separate from culture broth. Mathematical models which describe the cell growth and glucan production was developed and they kinetic parameters were estimated with experimental data. They are used for the optimization of continuous fermentation process and calculate optimal dilution rate for easy separation of glucan 4 g/l. With continuous fermentation, glucan production rate was increased 1.8 times more than that with batch fermentation.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.209-216
• /
• 2013

RFID/USN, are recognized as the new growth engines for the future, regardless of the advanced and developing countries. RFID, in particular, already entered practical stage by global companies. EPCIS, which is the one of the EPC golabal network components, makes a huge load on the system due to the large amount of entering data by following events. In this study, a data model developed based on ER-WIN by collecting four kind information that occurred in the EPC global networks. This model supports both in processing of high performance and huge capacity of data by a considerable storage capacity and input speed. A simulation was developed in order to verify the performance. Each model tested several times and results were compared.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.111-120
• /
• 1994

Cracks in rubber bonded to a rigid material such as steel are analyzed with the aid of a mixed finite element technique. Firstly the weak form is derived for finite element analysis of an incompressible material, and the Mooney-Rivlin form is assumed for the constitutive modeling of rubber. The numerical results from finite element analysis is examined to confirm the accuracy and convergence of solution by way of comparison to other numerical results. The interpretation of the J-integral for large elastic deformation as the energy release rate is confirmed, and the J-integral is calculated for varing crack length. The crack growth stability is discussed using the result of finite element analysis.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.17-26
• /
• 2005

HAZ (Heat Affected Zone) which occurs during welding thermal cycle has an important effect on the mechanical properties of the weld metal. So there were many efforts to develop the model which is able to predict the microstructure and mechanical properties in weld HAZ and lots of metallurgical models have reported since early 1940. These models are justifiable based on the reasonable assumption and analytical approach, but they also have limitation by interesting alloying system and assumption in each literature. Therefore, this study summaries the previous models for prediction of properties in weld HAZ. Then several issues to solve for developing the more reliable model were proposed.