Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

Prediction Model for the Microstructure and Properties in Weld Beat Affected Brine : I. Trends in The Development of Model for the Prediction of Material Properties in the Weld HAZ

용접 열영향부 미세조직 및 재질 예측 모델링 : I. 용접부 재질 예측 모델 기술 개발 연구 동향

  • Published : 2005.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

HAZ (Heat Affected Zone) which occurs during welding thermal cycle has an important effect on the mechanical properties of the weld metal. So there were many efforts to develop the model which is able to predict the microstructure and mechanical properties in weld HAZ and lots of metallurgical models have reported since early 1940. These models are justifiable based on the reasonable assumption and analytical approach, but they also have limitation by interesting alloying system and assumption in each literature. Therefore, this study summaries the previous models for prediction of properties in weld HAZ. Then several issues to solve for developing the more reliable model were proposed.

Keywords

References

  1. K. Easterling : Introduction to the physical metallurgy of Welding, Butterworths, (1983), 104
  2. Stephen Liu, Fang Chun Liao : Mat Sci & Eng A244 (1998) 273-283
  3. Sangho UHM, Joonoh MOON, Changheel LEE, Jihyun YOON and Bongsang LEE : ISIJ Int, 44-7(2004), 1230-1237
  4. Y. Li, D, N. Crowther, M. J. W. Green, P. S. Mitchell and T. N. Baker : ISIJ Int, Vol. 41
  5. O. Grong : Metallurgical Modeling of Welding, The Institute of Materials
  6. Sysweld+ User Manual(Ver. 10), Framasoft+CSI. 1996
  7. J. B. Leblond and J. C : Devaux, Acta Metall., 32, 1984
  8. Rosenthal : D., 2eme Congress National des Science, Brussels, (1935), 1277
  9. R. R. Rykalin : Welding in the World, 1012(1974) 227 (10)
  10. P. S. Myers, O. A. Uyehara and G. L. Borman : Welding Research Council Bulletin (1967), 123
  11. V. Pavelic, R. Tanbakuchi. O. A. Uyehara and P. S. Myers : Welding Journal, 48(1969), 295
  12. S. Kou : Metall. Trans. A, 13A(1982), 363
  13. J. A. Goldak, A. Chakravarti and M. J. Bibby Trans. AIME, 15B(1984), 299
  14. J. F. Key, H. B. Smartt, J. W. Chan and M. E. Mcilwain : Proceedings Int. Conf. on 'Welding Technology for Energy Applications', Gatlingburg, TN, 1982
  15. A. Bejan : Heat Transfer, (1966), 211
  16. C. Wagner : Z. Electrochem., 65(1961), 581
  17. M. J. Whelan : Metal Sci. J., 3(1969), 95 https://doi.org/10.1179/msc.1969.3.1.95
  18. J. Agren : Scand. J. Metall., 19(1990), 2
  19. R. E. Reed Hill : 'Physical Metallurgy of Principles (3th Ed.).' Boston, PWS, 1996
  20. W. C. Leslie : 'Physical Metallurgy of Steels(4th ed.),' Elsevier Science, 1982
  21. B. B. Rath and H. hu : Trans. TMS AIME, 245(1969), 1243
  22. B. B. Rath and H. hu : Trans. TMS AIME, 245(1969), 1577
  23. P. A. Manohar, D. P. Dunne, T. Chandra and C. R. Killmore. : ISIJ Int, 36 (1996), 194 https://doi.org/10.2355/isijinternational.36.194
  24. C. A. Dube, H. I. Aaronson and R. F. Mehl: Rev. Met., 55(1958), 201 https://doi.org/10.1051/metal/195855030201
  25. 일본 철강협회 : 제 128회 서산 기념 기술 강좌, 접합 기술 최근 진보(1989)
  26. W. T. Reynolds, Jr., M. Enomoto and H. I. Aaronson : Phase Transformations in Ferrous alloys, TMS AIME, Warrendale PA, (1984), 155
  27. J. Barford and W. S. Owen: J. Iron Steel Inst., 197(1961), 146
  28. M. Umemoto, K. Horiuch and I. Tamura: Trans. ISIJ, 22(1982), 855
  29. L. W. Graham and H. J. Axon: J. Iron Steel Inst., 191(1959), 361
  30. A. D. Davenport: Trans. AIME, 145(1941), 301
  31. R. M. Dey: Trans. Ind. Inst. of Metals, 39(1986), 169
  32. A. Matsuzaki and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 15(1999), 519
  33. F. V. Goler and G. Sach: Zeit. F. Phys., 77(1932), 281 https://doi.org/10.1007/BF01348916
  34. W. A. Johnson and R. F. Mehl: Trans. AIME, 125(1939), 416
  35. M. Avrami: J. Chem. Phy., 7(1939), 1103 https://doi.org/10.1063/1.1750380
  36. J. W. Cahn: Acta Metall., 4(1956), 449 https://doi.org/10.1016/0001-6160(56)90041-4
  37. M. Umemoto: Control and Prediction of Structure and Property, ISIJ, Tokyo, Japan, (1988), 105
  38. K. Lorenz and C. Duren: Conf. on Steels for Pipe and Pipeline Fittings, London, Oct. 21-23(1981)
  39. K. Satoh and T. Terasaki: General Assembly of JWS, 25(1979), 98
  40. K. Lorenz and C. Duren: IIW Doc. IX-B-II-82, (1982)
  41. M. Beckert and R. Holz: Schweisstechnik, 23(1973), 344
  42. W. C. Leshie: The Physical Metallurgy of Steels, Mcgraw Hill, New York, (1982)
  43. N. Yurioka, M. Okumura, T. Kasuya and H. J. U. Cotton: Metal Const., 19(1987), 44. 217R
  44. P. Maynier, J. Dollet and B. Jungmann: Proc. Of AIME Symposium, Oct. 24 26, (1977), 518