• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.146-152
• /
• 2001

The fractal geometry is a non-Euclidean geometry which discribes the naturally irregular or fragmented shaps, so that it can be applied to fracture behavior of materials to investigate the fracture process. Fractal curves have a characteristic that represents a self-similarity as an invariant based on the fractal dimension. This fractal geometry was applied to the crack growth of cementitious composites in order to correlate the fracture behavior to microstructures of cemposite composites. The purpose of this study was to find relationships between fractal dimensions and fracture energy. Fracture test was carried out in order to investigate the fracture behavior of plain and fiber reinforced cement composites. The load-CMOD curve and fracture energy of the beams were observed under the three point loading system. The crack profiles were obtained by the image processing system. Box counting method was used to determine the fractal dimension, D$_{f}$. It was known that the linear correlation exists between fractal dimension and fracture energy of the cement composites. The implications of the fractal nature for the crack growth behavior on the fracture energy, G$_{f}$ is appearent.ent.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2223-2233
• /
• 1993

An engineering method is suggested to calculate the applied load versus crack extension in the elastic-plastic fracture. The condition for an increment of crack extension is set by a critical increment of crack-up opening displacement(CTOD). The ratio of the CTOD increment to the incremental crack extention is a critical crack-tip opening angle(CTOA), assumed to be constant for a material of a given thickness. The Dugdale model of crack-tip deformation in an infinite plate is applied to the method, and a complete solution for crack extension and crack instability is obtained. For finite-size specimens of arbitrary geometry in general yielding, an approximate generalization of the Dugdale model is suggested so that the approximation approaches the small-scale yielding solution in a low applied load and the finite-element solution in a large applied load. Maximum load is calculated so that an applied load attains either a limit load on an unbroken ligament or a peak load during crack extension. The proposed method was applied to three-point bend specimens of a carbon steel SM45C in various sizes. Reasonable agreements are found between calculated maximum loads and experimental failure loads. Therefore, the method can be a viable alternative to the J-R curve approach in the elastic-plastic fracture analysis.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.3
• /
• pp.19-24
• /
• 2003

The experimental and simulation study of insulator failure by cement growth on suspended insulators (16,500kgf) for transmission line was discussed. To get more practical and analytic calculation results, the advanced program was used. This analysis tool was possible to calculate stress behaviors with mechanical loading when cement displacement happened. From simulation results, the. cement displacement changed with linear according to temperature. The shear stress was about $7 kgf/mm^2$ at $0.07\%$ displacement provided from $200^{\circ}C$, then it could be seen that the cement would be fractured even if $0.07\%$ displacement acted, because the cement had about $7-9 kgf/mm^2$ flexure strength. The curve patterns of shear stress with the increase of mechanical loading were changed at $0.02\%$ as a turning point, when the cement displacement was over $0.02\%$ the shear stresses decreased reversely with the increase of mechanical loading. From analysis on porcelain body it was known that there were enough margin to protect the fracture of porcelain body before the cement

• Human Ecology Research
• /
• v.59 no.3
• /
• pp.341-351
• /
• 2021

The purpose of this study was to examine the longitudinal relationships between Korean adolescents'mobile phone dependency, trajectories of depression, and self-regulated learning abilities. To achieve these goals, structural equation modeling analysis was conducted, using the 3rd, 5th and 7th wave of the data on 4th graders taken from the Korean Children and Youth Panel Survey. The results can be summarized as follows. First, growth-curve longitudinal analysis indicates that depression in 6th through 10th grade has increased. Second, mobile phone dependency among adolescents at 6th grade has a significant effect on both the initial value and the rate of change in depression. Also, the initial value and the rate of change in depression have significant relationships with mobile phone dependency at 10th grade. Moreover, both increased levels of mobile phone dependency and the rate of change in depression significantly influence adolescents'self-regulated learning abilities at 10th grade. Based on a longitudinal data set, these findings demonstrate the causal relationships between Korean adolescents'trajectories of depression and their mobile phone dependency. The findings also provide a comprehensive framework with implications for adolescents'development through an understanding of the relationships between adolescents'depression and mobile phone dependency, which impact their self-regulated learning abilities.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.71-75
• /
• 2003

The highway is greatly changed by the constant economic growth for a long times the traffic situation such as the large volumes and the performance vehicles, the performance enlargement of vehicles, the high speedization, etc., due to growth economic. A study of an optimal route selection model is researched over late 1980s by development of computer and GSIS, and consisted including research about the optimal route that uses digital terrain model in domestic such as the earth volume calculations, the mass curve output and the automation system construction. Lately, the study of the driving simulation of the highway and the virtual reality using VGIS(Virtual Geographic Information System) is researched. This study shows when the alternative highway selection considered surrounding facilities, development plan and according to estimate amount of traffic and the additional possibility of view analysis and environment effect analysis element will study through 3D simulation method.

• Natural Product Sciences
• /
• v.25 no.1
• /
• pp.38-43
• /
• 2019

Microbial wound infection prolonged the hospitalization and increase the cost for wound management. Silver is commonly used as antimicrobial wound dressing. However, it causes several adverse side effects. Hence, this study was aimed to evaluate the antimicrobial efficiency of Swietenia macrophylla seed extract on clinical wound pathogens. Besides, the bioactive constituents of the seed extract were also determined. S. macrophylla seeds were extracted with methanol by maceration method. The seed extract inhibited 5 test bacteria and 1 yeast on disc diffusion assay. The antibacterial activity was broad spectrum, as the extract inhibited both Gram positive and Gram negative bacteria. On kill curve analysis, the antibacterial activity of the seed extract was concentration-dependent, the increase of extract concentration resulted in more reduction of bacterial growth. The extract also caused 99.9% growth reduction of Bacillus subtilis relative to control. A total of 21 compounds were detected in gas chromatography- mass spectrometry analysis. The predominant compounds present in the extract were oleic acid (18.56%) and linoleic acid (17.72%). In conclusion, the methanolic extract of S. macrophylla seeds exhibited significant antimicrobial activity on clinical wound pathogens. Further investigations should be conducted to purify other bioactive compounds from the seeds of S. macrophylla.

• Korean Journal of Environment and Ecology
• /
• v.28 no.4
• /
• pp.432-441
• /
• 2014

April, 2005 to October, 2013. The collected species during the survey period were 17 species belonging to 6 families. Dominant species was Zacco koreanus(Relative abundance 59.9%) and subdominant species Pungtungia herzi(8.5%). Korea endemic species were 12, including Coreoleuciscus splendidus. The species of Hemibarbus mylodon was identified as natural monument, and Pseudopungtungia tenuicorpa and Gobiobotia brevibarba were endangered species. Water quality assessment of Gapyeong Stream, had lately maintained the rating of "very good" for nine years, based on the Ministry of the Environment standards notice. It was found that there was a tendency for populations which is Coreoperca herzi carnivorous species decreases, increases omnivorous species Zacco platypus. As a result of community analysis, dominant index was 0.58~0.86, diversity index was 0.94~1.77 and richness index was 0.99~2.39. As a result of using the Rarefaction curve, were analyzed occurrence species expected each year, number of species is estimated from a sample of 151 individuals, up to 12(2005) was at least 5(2007) species. The regression coefficient (b) in relation to length-weight on Z. koreanus population were annual average $3.29{\pm}1.11$, condition factor slope $0.0034{\pm}0.0021$, which maintained good growth condition and stabilized population.

• Korean Journal of Materials Research
• /
• v.15 no.10
• /
• pp.671-677
• /
• 2005

Ti and Ti alloys are known to have excellent corrosion properties, which is an important aspect for biocompability of these implants in human body. In our study, four types of samples (Cp-Ti, Ti-6Al-4V, $0.5wt.\%$ Fe-Ti and ECAP Ti) were tested for their apatite forming ability and corrosion properties. The micropolished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. Each samples was gently washed with distilled water and heat-treated at 600"C for 1 hour. The heat-treated samples were soaked in Simulated Body Fluid (SBF) solution at $36.5^{\circ}C$ in an incubator for different period of time. The test revealed that $0.5 wt.\%$ Fe-Ti showing faster apatite growth on the surface (7th day) compared to other samples. Polarization curve test (PCT) was also carried out to determine the corrosion resistance of each samples in SBF solution. ECAP-Ti showed highest corrosion resistance compared to any other samples. $0.5wt.\%Fe-Ti$ showed higher corrosion potential and corrosion current compared to other samples.

• The Korean Journal of Pharmacology
• /
• v.30 no.2
• /
• pp.205-215
• /
• 1994

It is well known that chronic stimulation with CCK gives rise to growth of exocrine pancreas and to increased content of enzyme proteins in pancreas. However, littls Is known about changes of the secretory function of exocrine pancreas which has been chronically stimulated with CCK, especially about the responsiveness to secretagogues such as CCK, caerulein and carbachol. The present study was performed to investigate the effect of camostat on secretory profiles and the responsiveness to secretagogues of exocrine pancreas by observing in vitro amylase release stimulated by cholecystokinin-octapeptide(CCK-8) and carbachol in dispersed isolated pancreatic acini from camostat-treated rats for 4 or 10 days. The results summarized as follows : 1) The maximal effective concentration of CCK-8 in amylase release in the camostat treated group was greater than control group, but that of carbachol was not different between groups. 2) Analysis of the stimulated amylase release as the percentage of the maximal response revealed that camostat treatment caused right-shift of the dose-response curve of CCK-8. Camostat did not cause significant changes in the dose-response curve of carbachol. 3) There were considerable increases in the amylase release in the camostat-treated group, compared to the control when acini were stimulated with CCK-8 $10^{-9}\;M$ and carbaochol $10^{-6}\;M$, and higher concentrations. 4) There was a reverse correlation between the tissue content and the maximal release(percent of the total content) of amylase. These results suggest that chronic exposure of exocrine pancreas to increased endogenous CCK can enhance the responsiveness of exocrine enzyme secretion to secretagogues, especially at higher concentrations of CCK and carbachol.

• Korean Journal of Microbiology
• /
• v.53 no.3
• /
• pp.193-199
• /
• 2017

This study was aimed to evaluate the antimicrobial activity of Penicillium purpurogenum ED76 on several clinically important microorganisms. The endophytic fungus P. purpurogenum ED76 was previously isolated from Swietenia macrophylla leaf. The antimicrobial efficacy of P. purpurogenum ED76 dichloromethane extract was determined via disc diffusion and broth microdilution assay. A kill curve study was conducted and the morphology of extract treated bacterial cells were viewed under scanning electron microscope. The dichloromethane extract showed significant inhibitory activity on 4 test bacteria and 2 test yeasts. The minimal inhibitory concentration of the extract ranged from 125 to $1,000{\mu}g/ml$, which indicates the different susceptibility levels of the test microorganisms to the fungal extract. The kill curve study has revealed a concentration-dependent inhibition for all test microorganisms. With the increase of the extract concentration, the microbial growth was significantly reduced. The scanning electron micrograph of dichloromethane extract-treated Staphylococcus aureus cells showed the total damage of the cells. The cell wall invagination of the bacterial cells also indicates the loss of cellular materials and metabolic activity. The gas chromatography mass spectrometry analysis of the extract also showed that the major compound was stigmasterol, which constitutes 45.30% of the total area. The dichloromethane extract of P. purpurogenum ED76 exhibited significant inhibitory activity on several clinically important bacteria and yeasts. The study proposed a possible mode of action that the extract cause significant damage to the morphology of S. aureus cells.