• 제목/요약/키워드: growth conditions

검색결과 6,781건 처리시간 0.041초

Effect of $CO_2$ Enrichment on Photosynthetic Rates, Enzyme Activity rind End Products of toro Poplar Clones, 1-214 (Populus euramericana) and Peace (P. Koreana x P. trichocarpa)

  • Shin-Young Park;Akio Furukawa
    • 한국환경과학회지
    • /
    • 제1권1호
    • /
    • pp.51-59
    • /
    • 1992
  • Two comparative poplar clones (I-214: Populus euramerinm, Peace: P koreana x p. trihocarpa) were exposed to two $CO_2$ concentrations (350 or 2, 000 ${\mu}L L^{-1} CO_2$) for 21 days. When both poplar clones were compared at growth conditions, the net photosynthetic rate ($P_N$) in $CO_2$-enriched ($2, 000{\mu}L L^{-1} CO_2 = C_{2, 000}$) plants become about 50-60% higher than that of 350 ${\mu}L L^{-1} CO_2 (=C_{350}$ Plants on 7 days treatment. But the enhancement of PN by high $CO_2$ was not maintained throughout all the experimental period. At 21 days, there was no difference of photosynthetic rates between $C_{350}$ and $C_{2000}$ plants. In contrast with photosynthesis, the response of leaf conductance to the elevated $CO_2$ concentration was very different between I-214 and Peace. During all experimental period, leaf conductance ($g_{s}$) of $C_{2000}$ plants is 50% lower than that of the $C_{350}$ plants for I-214, while there is no difference of gs between the plants of $C_{350}$ and $C_{2, 000}$ for Peace. The results of gs in Peace indicate that decreased photosynthetic rate after 21 days in $C_{2, 000}$ Plants for two poplar clones is possibly due to non-stomatal factors. To investigate the non-stomatal factors, starch accumulation and ribulose-1, 6-bisphosphate carboxylase (RuBPCase) were measured. We found significant accumulation of starch in two poplar clones exposed to high $CO_2$, especially starch of I-214 in $C_{2, 000}$ become 3.5 times higher than in $C_{350}$ plants at 21 days. This suggests that high proportion of photosynthates was directed into starch. After 21 days, the activity of ribulose-1, 6-bisphosphate carboxylase of $C_{2, 000}$ plants become decreased in 40-50% compared with that of the $C_{350}$ plants. Two poplar clones show the same trend to RuBPCase declines under high $CO_2$ concentration, although the decline is more significant for I-214. The results reported here suggest that starch accumulation and decreased RuBPCase activity in $C_{2, 000}$ plants can be partly ascribed to the loss of photosynthetic efficiency of high $CO_2$-grown poplar plants.

  • PDF

식품의 동결중에 생성되는 빙결정에 미치는 동결조건의 영향 (Effect of Freezing Conditions on the Formation of Ice Crystals in Food during Freezing Process)

  • 공재열;김정한;김민용;배승권
    • 한국식품영양과학회지
    • /
    • 제21권2호
    • /
    • pp.213-218
    • /
    • 1992
  • 식품의 동결중에 생성되는 빙결정의 크기에 미치는 동결조건의 영향을 조사하고 그 관계를 정량적으로 평가함과 아울러 동결조건과 빙결정 분산구조와의 관계를 이론해석에 의해 조사한 결과, 1. 동결이동속도 u는 생성빙결정의 평균경 d$_{p}$와 u .d$_{p}$/D~constant의 관계에 있음을 간단한 차원해석에 의해 예측이 가능하였다. 2. 2% 한천 겔, 5%한천 겔, 20% 젤라틴 겔, 돈육의 순서로 동결점에 도달하는 시간이 빨라지며 동결시간 및 최대빙결품 생성대의 통과시간은 냉매온도와 선형적인 관계를 나타내었다. 3. 대두 단백질 겔중에 생성되는 빙결정의 평균경 d$_{p}$와 동결계면 이동속도 u 는 반비례 관계를 나타내었으며, 이로부터 구해진 u .d$_{p}$의 값은 3.4$\times$$10^{-6}$ $\textrm{cm}^2$/sec로 예측 이론식이 유효한 것으로 사료되었다. 4. 동결보존중의 대두 단백질 겔 내부에 생성된 빙결정의 성장에 미치는 보존온도의 영향을 조사한 결과, 양자가 빙결정의 성장에 미치는 영향은 거의 없는 것으로 나타났다. 5. 동결조건과 동결계면구조와의 사이에 Moving velocity of freezing front= (Mass transfer rate of water at freezing front)$\times$ (Surface area of freezing front) 의 관계를 나타내었다.

  • PDF

Bacillus subtilis JS-17이 생산하는 Collagenase의 정제 및 특성 (Purification and Characterization of Bacillus subtilis JS-17 Collagenase.)

  • 임경숙;손승희;강호영;전홍기
    • 생명과학회지
    • /
    • 제15권4호
    • /
    • pp.657-663
    • /
    • 2005
  • Collagnase는 천연 collagen의 triple-stranded helix를 분해할 수 있는 protease로서 조직의 수복과 재생 과정에서 collagen의 재형성과 세포의 이동에 아주 중요한 역할을 하고, 숙주 감염시에는 collagen 기질을 빠르게 분해함으로써 감염을 돕는다. 본 연구에서는 일반가정에서 식용하는 김치로부터 collagenase를 생산하는 균주를 분리하여 Bacillus subtilis로 동정하였으며 이를 Bacillus subtilis JS-17이라 명명하였다. Bacillus subtilis JS-17이 생산하는 collagenase의 최적 생산 조건은 $1.5\%$ fructose, $1\%$ yeast extract, $0.5\%\;K_2HPO_4,\;0.4\%\;KH_2PO_4,\;0.01\%\;MgSO_4{\cdot}4H_2O,\;0.1\%\;citrate,\;0.1\%\;CaCl_2(pH\;7.0)$의 배지에서 $30^{\circ}C$, 200 rpm으로 72시간 동안 배양하는 것이다. 최적 조건에서 Bacillus subtilis JS-17이 생산하는 collagenase를 Amberlite IRA-900 column chromatography, Sephacryl S-300 HR column chromatography, DEAE-Sephadex A-30 column chromatography를 거쳐 분리 정제하고, 얻어진 정제 효소의 특성에 대하여 검토하였다. 정제된 collagenase의 비활성은 growth medium에서 192.1 units/mg였고, $1.1\%$의 수율로 얻어졌으며 분자량은 28 kDa이었다. 정제된 collagenase는 $55^{\circ}C$까지는 $100\%$의 활성을 유지하였고 $65^{\circ}C$에서도 $60\%$ 정도의 활성을 유지하였다. 또한 pH $6.0\~9.8$에서 $60\%$ 이상의 활성을 유지하였다. 정제된 collagenase는 metalloprotease inhibitor인 EDTA와 O-phenanthroline에 의해 효소 활성이 감소하였을 뿐만 아니라 Ammoninum persulfate, L-cysteine, N-ethylmaleimide, SDS, $NaN_3$, NaF, $KMnO_4$, PMSF에 대해서도 활성이 감소하였다. 정제된 collagenase를 여러 가지 기질에 대해 효소 활성을 비교한 결과 collagen (type I)에 대해 기질 특이성을 가지고 있었다.

진공용기를 이용한 포장두부의 개봉 후 저장성 연장 (Effects of Vacuum Container on the Storability of Leftover Tofu)

  • 이지윤;장시훈;이윤석;박수일
    • 한국식품과학회지
    • /
    • 제41권1호
    • /
    • pp.11-15
    • /
    • 2009
  • 본 연구는 개봉 후 남은 두부의 보관에 이용되는 용기 및 저장방법에 따른 두부의 저장성을 평가하고자, 진공용기, 밀폐용기, 그리고 두부제조사의 두부 포장용 트레이를 이용하였다. 냉장온도($5^{\circ}C$)에서는 진공용기를 적용하였을 때 미생물 생장을 일부 억제한 반면, 상온($25^{\circ}C$)에서는 용기간 유의적 차이가 없었다. 이는 온도 상승에 의한 미생물 생육이 진공을 적용함으로 억제되기는 어렵다는 것을 보여준다. 두부의 색도 변화는 온도와 저장기간에 따른 차이가 거의 없어 침지에 의해 색변화가 억제되는 것으로 사료된다. $5^{\circ}C$에 저장한 두부 침지액의 pH는 진공용기에서는 15일째까지 초기값을 유지하였으며 밀폐용기 및 트레이는 각각 12일 및 9일 이후 감소하여 진공용기와 차이를 보였다. 상온 저장에서는 12시간 이후 침지액의 pH 및 탁도 변화가 모든 용기에서 급격히 일어나 두부의 보관수명이 12시간을 넘지 못하였다.

Optimization and characterization of biodiesel produced from vegetable oil

  • Mustapha, Amina T.;Abdulkareem, Saka A.;Jimoh, Abdulfatai;Agbajelola, David O.;Okafor, Joseph O.
    • Advances in Energy Research
    • /
    • 제1권2호
    • /
    • pp.147-163
    • /
    • 2013
  • The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

전기도금법을 이용한 FCCL용 구리박막 제조시 레벨러의 영향 연구 (The Effects of Levelers on Electroplating of Thin Copper Foil for FCCL)

  • 강인석;구연수;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제19권2호
    • /
    • pp.67-72
    • /
    • 2012
  • 최근에 전자 산업 분야에서 장치의 고용량을 구현 하기 위해 구동 drive IC의 선폭은 좁아지고 집적도는 증가하고 있다. 이러한 반도체, 전자 산업 분야의 초소형화, 고밀도화에 따라 FCCL(Flexible Copper Clad Laminate)의 표면 품질이 더욱 중요해 지고 있다. FCCL의 표면 결함으로는 돌기, 스크레치, 덴트 등이 있다. 특히 돌기가 표면에 존재할 경우 후속 공정에서 쇼트와 같은 불량을 유발할 수 있으며, 제품의 품질 저하를 야기 시킬 수 있다. 하지만 표면에 돌기가 존재한다 하더라도, 전해액의 레벨링 특성이 우수하다면 돌기의 성장을 막을 수 있다.평탄하고, 결함이 없는 도금표면을 얻기 위해서는 첨가제의 역할이 필수적이다. 평탄한 구리 표면을 형성하기 위해서 stock solution에 가속제, 억제제, 레벨러를 첨가하였다. 레벨러를 첨가하는 이유는 평탄한 표면을 얻고, 돌기의 형성을 억제하기 위함이다. 구리도금 표면 형상을 향상시키기 위한 레벨러로는 SO(Safranin O), MV(Methylene Violet), AB(Alcian Blue), JGB(Janus Green B), DB(Diazine Black) and PVP(Polyvinyl Pyrrolidone)가 사용되었다. 도금 첨가제와 도금 조건의 변화를 통해 도금시레벨링 특성을 향상시키고, 레벨링 특성 측정을 위해 니켈 인공돌기를 제작 한 후 레벨링 특성을 측정하였다.

강우 및 태양광 씨뮤레이터를 이용한 침식방지 브랑켓들의 침식방지 효과와 식물성장의 촉진효과 확인을 위한 실험 (Tests of Different Erosion Control Blankets for Erosion Control and Plant Growth Enhancement under Simulated Rain and Sunlight)

  • 장창학
    • 한국환경복원기술학회지
    • /
    • 제1권1호
    • /
    • pp.133-140
    • /
    • 1998
  • The following conclusions are based upon data collected and visual observations made during the performance of the tests : 1. The performance of the erosion control products tested was for a particular set of conditions, and may be expected to differ if any or all of the test parameters were to be changed. If even just one parameter is changed from one test to the next, the results can be expected to be different. 2. Due to the fact that only two replications of each product were tested, we believe that the results presented herein are indicative only and not conclusive. 3. The ECB SC produced the least amount of soil erosion followed by ECB S, ECB C, and Coir No. 2, in that order. 4. All of the erosion control blankets tested significantly reduced soil erosion rates with respect to the bare soil controls. 5. The ECB S produced the smallest water runoff rate, followed closely by ECB SC. Next in order were ECB C and Coir No. 2. 6. All of the erosion control blankets reduced the water runoff rate with respect to the bare soil control. 7. Mesh 2cm There was not much difference in plant height for the four erosion control blankets and the bare soil control plots. the ECB S produced slightly taller plants than the rest of the materials tested. 8. The four erosion control blankets(ECB C, ECB SC, ECB S, and Coir No. 2) produced a larger plant mass than the bare soil plots. The difference between the plant mass for the four erosion control blankets, however, is minimal. 9. The ECB C produced the least percentage of lost seed and the largest percentage of germinating seed. 10. The ECB SC had the second smaller percentage of seed lost, followed closely by ECB S, and then by Coir No. 2. 11. All erosion control blankets had a smaller percentage of seed lost than the bare soil control plots. 12. The ECB C had the second largest percentage of germinating seed, followed closely by ECB SC and Coir No. 2. 13. All erosion control blankets had a larger percentage of germinating seed than the bare soil control plots. 14. The ECB C had the smallest percentage of non-germinating seed, followed by ECB S, Coir No. 2, and ECB SC, in that order. 15. All erosion control blankets had smaller percentages of non-germinating seed than the bare soil control plots.

  • PDF

잡곡 및 사료 생산 수급전망과 대책 (Perspectives and Strategies of Production of Miscellaneous Crops and Animal Feeds)

  • 정승근
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 1998년도 21세기 한반도 농업전망과 대책(한국작물학회.한국육종학회 공동주관 심포지움 회보)
    • /
    • pp.266-287
    • /
    • 1998
  • Environmental conditions and expected profit are the major criteria to select crops to be cultivated in any region. Traditionally, miscellaneous crops have been cultivated as alternative crop in case of unfavorable climate or supplementary crop in marginal lands. Since the successful breeding of high yielding varieties of staple crops and development of cultural techniques in 1970s in Korea, production of miscellaneous crops decreased markedly due to the rapid commercialization of agriculture and increased productions of horticultural crops, although yields have been doubled during the last $2\~3$ decades. On the other hand, animal husbandry has been developing remarkably parallel with national economic development and the increased consumption of animal products. As a result, imports of feed grains such as corn have increased rapidly, while roughage production became lower than demand. Among miscellaneous crops, corn production increased markedly through the development of hybrids and due to its importance as silage crops. Acreage of corn production including grains, fresh corns and feeding is about 120,000 ha, while acreage of buckwheat is about 5,000 ha and those of other miscellaneous crops decreased to a level of about 1,000 ha. Although miscellaneous crops have low yield potential and are unprofitable due to low price and imports of cheap foreign products, they should be kept to cultivate. Miscellaneous crops are important components that maintain diversity among upland crops as well as alternative crops in case of unfavorable climate. The low yield potential of miscellaneous crops might be due to lack of efforts to breed high yielding varieties and to develope cultural techniques. Continuous investment in research, exploitation of new utilization for miscellaneous crops as sustainable crop, honey crop and sightseeing crop, and development of healthy and special foods will promote their cultivation. Animal feeding in Korea depends mainly on formula feeds. As the number of animals increases to meet demand of animal products, there is no alternative way but to import grains to feed them. But roughage production, which is necessary for normal growth of ruminant animals, should be increased. However, lack of arable land and pasture land limits the production of good roughages. It is estimated that number of course for meat and milk production will be $2.5{\~}2.6$ million and total of $6.2{\~}7.5$ million tons of roughages should be produced. This implies that more than 1 million tons of roughage are needed, although pasture land, upland for forage crops, forage crops after rice cultivation and rice straw are utilized. Therefore, new reclamation of pasture land, increased roughage production in cultivating land, increased cultivation of forage crops after rice, more utilization of rice straw and active exploration of indigenous plant species as roughage resources should be promoted

  • PDF

수도 유묘기 내냉성의 품종간 차이에 관한 연구 (Studies on the Varietal Differences of Tolerance to Cold Damage in Seedling Stage of the Rice Plant)

  • 조정익;배성국
    • 한국작물학회지
    • /
    • 제21권1호
    • /
    • pp.35-42
    • /
    • 1976
  • 주 야간의 온도를 각각 20-1$0^{\circ}C$, 25-1$0^{\circ}C$, 20-15$^{\circ}C$, 25-15$^{\circ}C$ 및 온실조건의 환경하에서 본엽 1.5엽기와 본엽 출현시로부터 31일간 온도 처리하여 유신외 5 품종의 생육반응에 대하여 조사한 결과를 요약하면 다음과 같다. 1) 처리온도가 높아 짐에 따라 초장, 엽령, 건물중, 근장, 엽록소 함량 등은 점차 증가하고, 실소의 함유율은 오히려 저온에서 높았으며, 분얼은 유신, 만경, 이리 32002에서만 발생하였는데, 온실배재에서는 분얼을 하지 않았으며, 온도가 낮고 주 야간의 온도차가 큰 구에서는 분얼이 더 많았었다. 2) 평균기온이 동일한 20-15$^{\circ}C$, 25-1$0^{\circ}C$구에서 엽령과 질소함량 이외의 초장, 건물중, 엽록소 함량 및 근장 등은 20-15$^{\circ}C$구에서 모두 높았다. 따라서 주간온도가 5$^{\circ}C$ 낮은 20-15$^{\circ}C$구보다 야간온도가 낮은 25-1$0^{\circ}C$구에서 그 영향이 크게 나타났고, 20-1$0^{\circ}C$의 저온구에서는 이리 32002, 만경, 유신이 생육 정도가 아주 작게 나타났다. 3) 저온 장해는 본업 1.5엽기 처리구보다 본엽 출현시 처리구가 모든 품종에서 심하게 나타났으므로 유묘기간중 최아후 약 10일 정도의 온도관리가 대단히 중요하게 작용한다. 따라서 20-1$0^{\circ}C$ 저온하에서 생육 억제가 적은 유신은 최아후 파종하여 10일 동안 관리를 주의한다면 보통못자리에서도 육묘가 가능하다고 본다. 4) 일반적으로 japonica형은 indica$\times$japonica형보다 내냉성이 강하고, indica$\times$japonica 품종중 이리 31006는 가장 약한 만면 유신은 가장 강하게 나타난점으로 보아 다수성 신 품종의 생육기별 내냉성의 검토가 요청된다. 5) 품종간 내냉성은 이리 32002>만경>유신>통일ㆍ이리 32005>이리 31006 순으로 나타났다. 그러나 이것은 단순히 유묘기의 냉해 정도만을 조사하였으므로 앞으로 본답기의 지연형, 장해형냉해의 종합적인 연구가 필요하다고 본다.

  • PDF

선단무산소조를 이용한 영양소제거공정(Bio-NET)의 질소·인 제거 특성 (Nitrogen and Phosphorus Removal Characteristics of a New Biological Nutrient Removal Process with Pre-Denitrification by Pilot Scale and Computer Simulation Program)

  • 오영기;오성민;황연상;이경수;박노연;고광백
    • 대한환경공학회지
    • /
    • 제22권1호
    • /
    • pp.121-132
    • /
    • 2000
  • TCODcr 380mg/L이며 TKN이 65mg/L, TP 12mg/L가량인 도시하수의 질소, 인 제거를 위하여 $13{\sim}28^{\circ}C$에서 선단무산소조를 설치한 영양소제거공정(Bio-NET)을 $10m^3/d$ 규모의 pilot plant를 설치하여 내부반송율과 SRT를 변화시켜 운전하여 질소, 인 제거 특성을 살펴 보고 이를 시뮬레이션 프로그램을 이용하여 모사한 결과를 상호 비교하였다. SS, CODcr의 경우 각각 94%, 87%의 제거효율을 안정적으로 보였으며, 질소의 경우 52%~89%로 평균 75%의 제거효율을 보였다. 또한 인의 경우 안정적으로 평균 90% 이상의 높은 제거효율을 보여주었다. 또한 선단무산소조에서는 유입수내에 높은 $COD/NO_3-N$가 유지되어 비탈질속도는 평균 9.04mgN/gMv/hr로 분석되었다. 인의 거동은 유입수의 SCOD부하에 의해 큰 영향을 받는 것으로 나타났으며 비인용출속도는 평균 6.25mgP/gMv/hr를 보였다. 혐기조에서 비인용출속도는 평균 1.0mgP/gMv/hr를 보였고 폭기조에서 비질산화속도는 평균 2.9mgN/gMv/hr로 분석되었다. GPS-X 프로그램을 이용하여 모델의 내부인자 중 종속영양미생물군의 최대비중식속도, 인의 용출에 관련된 Short Chain Fatty Acid(SCFA) limit, 인의 섭취와 관련된 COD 이용당 인용출량을 반응조 특성에 맞게 보정하여 시뮬레이션을 실시한 결과와 pilot plant 실측치가 유사한 것으로 나타났다.

  • PDF