• 소성∙가공
• /
• 제9권2호
• /
• pp.128-139
• /
• 2000

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of wrinkles are influenced by many factors such as stress state, mechanical properties of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show a wide variation for small deviations of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth. All the above mentioned factors are conveniently considered by the finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing a column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• 한국지능시스템학회논문지
• /
• 제13권5호
• /
• pp.621-626
• /
• 2003

In this paper, we modeled a virtual life (VL) that reacts to the user s action according to its own behavioral characteristics and grows itself. We established some conditions with which such a VL is designed. Genetic Algorithm is used for the growth process that changes the VL s properties. In this process, the parameter values of the VL s properties are encoded as one chromosome, and the GA operations change this chromosome. The VL s reaction to the user s action is determined by these properties as well as the general expectation of each reaction. These properties are evaluated through 5 fitness measures so as to deal with multi-objective criteria. Here, we present the simulation of the growth Process, and show some experimental results.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.93-97
• /
• 2003

Fatigue crack growth test or low alloy steel was performed in high temperature water. Test parameters were dissolved oxygen content. loading frequency and R-ratio ($P_{min}/P_{max}$). Since the sulfur content or the steel was low, there were no environmentally assisted cracks (EAC) in low dissolved oxygen(DO) water. At high DO, the crack growth rate at R = 0.5 tests was much increased due to environmental effects and the crack growth rate depended on loading frequency and maximized at a critical frequency. On the other hand, R = 0.7 test results showed an anomalous decrease of the crack growth rate as much different behavior from the R = 0.5. The main reason of the decrease may be related to the crack tip closure effect. All the data could be qualitatively understood by effects of oxide rupture and anion activity at crack tip.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.83-90
• /
• 2004

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature and low temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$,$-100^{\circ}C$, and $-150^{\circ}C$, in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I)was increased but stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to decrease temperature. It is assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerably higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.379-384
• /
• 1997

Al-15Cu-lMg alloys have been directionally solidified in 3mm diameter alumina tubes under the conditions of $760^{\circ}C$ of furnace temperature and 12 cm/hr of furnace moving velocity(V). By analyzing the evolution of the temperature profiles along the alloy length, the position of the solid/liquid interface, temperature gradient(G) and local growth velocity (R) were determined. These growth characteristics were compared for 6, 10, 14 cm length alloys. Steady state growth region was obtained in 15 cm length alloy, not in 6, 10 cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.174-175
• /
• 2005

Initial growth stage was investigated for SiC homoepitaxial film growth using 'step controlled epitaxy' technique. When the off angel direction is located parallel along to the gas flow direction, the smoother surface can be obtained. On the on axis substrates, selective etching was detected both the etching and growth condition. It was deduced that the high ratio of C/Si in the source gas results in well developed steps and etched spiral around micropipes.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.291.2-291.2
• /
• 2013

Growth behavior of b-Ga2O3 nanowires (NWs) on sapphire(0001) substrates during radio-frequency magnetron sputtering is reported. Upon fabrication, flat thin films grew initially, subsequent to which, NW bundles were formed on the surface of thin film with increasing film thickness. This transition of the growth mode occurred only at temperatures greater than ${\sim}450^{\circ}C$. The b-Ga2O3 NWs were grown through the self-catalytic vapor-liquid-solid mechanism with self-assembled Ga seeds. Secondary growth of NWs, which occurred from the sides of primary NWs resulting in branched NW structures, was also observed. Finally, the room temperature photoluminescence properties of as-grown and annealed b-Ga2O3 NW samples were investigated.

• 소성∙가공
• /
• 제33권1호
• /
• pp.12-17
• /
• 2024

Aluminum-zinc-magnesium alloy is a well-known alloy that is both strong and lightweight. Precipitation strengthening plays a significant role in the strength mechanism of this alloy, with nano-sized η-based precipitates being the representative precipitates. However, the growth of η precipitates can lead to a decrease in strength, necessitating research into ways to control their growth. In this study, we observed the atomic-level behavior of η₂ precipitates and discovered that the precipitates grew through a combination with magnesium after a zinc segregation layer was formed around them.

• 복식문화연구
• /
• 제6권4호
• /
• pp.50-61
• /
• 1998

This study aims to make clear how consumer's characteristic and involvement in infant's clothing effect on the purchasing behavior. Using questionnaire as a researching tool, I collected the date from 366 housewives who live in Seoul and have kids aged from two to six year-old. The results of the study were as follows : First, they showed a significance on the correlation between sub-variants of involvement in their child's clothing like interest, importance and cognition of danger and those of purchasing behavior like directions to trademark, beauty and practicality, and so that, ti was realized that the involvement have a great effect on their purchasing behavior like. This was of the same opinion that when they think economic significance seriously, they also think practical function importantly. It seems that such a result derived from the fact that infant's clothing is most involved in practicality and economy rather than in trademark, beauty and popularity which are important on adult's clothing because infant's growth is so rapid that it requires to change sooner. Second, as for the correlation between the involvement in their child's clothing and the purchasing behavior according with the consumer's characteristics, they showed a significant correlation according with the consumer's characteristics like husband's profession, average monthly income and monthly expense to purchase infant's clothing. I found, therefore, economic factors like husband's profession, average monthly income and monthly expense to purchase infant's clothing were of most important. It suggests that the higher the consumer's income is, the grater it have an effect on the purchasing behavior.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.116-120
• /
• 2011

With population growth and quality of life improvement, household energy use also has increased. Under this circumstances, consumers are increasingly required to seek for efficient ways of energy saving. However, precedent studies have largely overlooked energy consumers' consumption behavior, and particularly little research has been conducted on energy consumption or saving patterns of residents living in apartments, which account for over 50% of the Korean housing market. Therefore, this study examined apartment residents' energy use behavior according to apartment residents' characteristics in order to efficient energy use and management. To this examination, survey was conducted of housewives living in apartments in Busan, and 403 data were analyzed by the SPSS WIN 12.0 program. With respect to their energy behavior according to characteristics of subjects, it was different depending on income, housing size, age, the length of residence, and the education standard. When higher income group and larger housing size group, residents were not doing 'passive saving' and 'comfort oriented.' When younger, they were 'comfort oriented.' When well-educated, they were 'comfort oriented.' Also, with regard to the length of residence, significant difference was found. The results of this study can be utilized as effective guidelines in efficient management, policy making, and education method reflecting energy use behavior of energy users.