• 설비공학논문집
• /
• 제14권3호
• /
• pp.261-267
• /
• 2002

The integral boundary layer equation for the air side and the diffusion equation for the frost layer are numerically analyzed in order to predict the behavior of frost layer growth. The thickness and density of the frost layer obtained from the present study agree well with those of previous numerical results and experimental data with a maximum error of 13%. The characteristics of heat and mass transfer within the frost layer and the frost layer growth along the flow direction are investigated by performing numerical analysis. The effects of operating conditions on the frost layer growth are also examined.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권3호
• /
• pp.30-34
• /
• 2006

We investigated fatigue crack growth behavior in laser-welded sheet metal caused by a single applied overload The fatigue specimens were made using butt jointed cold rolled sheet metal that was welded with a $CO_2$ laser, The effects of the specimen thickness and overload ratio were determined from fatigue crack propagation tests, These tests were performed in such a way that the fatigue loading was aligned parallel to the weld line while the crack propagated perpendicular to the weld line, Overload ratios of 1.0, 1.5, and 2. 0 were applied near the tip of the fatigue crack at points located 6, 4, and 2 mm from the weld line. The specimens were either 0.9 or 2.0 mm thick. The size of the plastic zone at the crack tip due to the single applied overload was also determined using finite element analysis.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.55-64
• /
• 1990

The fatigue crack growth behavior of physically-short cracks(0.2${\Delta}K$ with $da/dN<1{\times}10^{-7}m/cycle$. The transition crack lengths where similtude with ${\Delta}K$ existed was between 1 and 2mm. The effective stress intensity factor range based on COD measurements gave better correlation between the physically-short and long cracks. Thus it can be considered that the crack closure effect is one of the main factors which causes the differences between these two cracks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.205-210
• /
• 2001

Fatigue crack growth tests were carried out using high manganese cast steel under constant amplitude loading. Average crystal grain sizes of the material are $200{\mu}m$ and $1000{\mu}m$. For this material, ${\Delta}K_{th}$ is about $8MPa{\sqrt{m}}$ which is quiet large as compared to the general structural steels and the crack growth rate is lower than the general structural steels especilly in the low ${\Delta}K$ regsion. The reason of this behavior is crack closure due to fracture surface roughness and fretting oxide. The relationship between da/dN and the ${\Delta}K_{eq}$ was represented by narrow band regardless of the stress ratio.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.820-823
• /
• 2002

The asymptotic problem of a semi-infinite conducting crack parallel to the poling direction in ferroelectric ceramics subjected to electric fields is analyzed. The main mechanism for the conducting crack growth behavior is thought to be ferroelectric domain switching leading to the development of a process zone around the crack. The shape and size of the switching zone is shown to depend strongly on the relative magnitude on the ratio of the coercive electric field to the yield electric field. It is shown that the crack growth can be either enhanced or retarded depending on the ratio of the coercive electric field to yield electric field.

• 오토저널
• /
• 제12권4호
• /
• pp.75-82
• /
• 1990

To study on the behavior of the early stage of the spark kernel at constant pressure condition, the expressions of the thermal properties such as compressibility factor, thermal conductivity, and electrical conductivity of the high temperature air were newly suggested. The newly suggested simple expressions of the thermal properties of the high temperature air showed good results. Under the assumption of constant pressure, one dimensional numerical analysis was executed by varying surrounding conditions and discharging current of electrical spark. Numerical results show tat high surrounding pressure suppresses the growth of the spark kernel but supplies much electrical energy into the air, on the other hand high surrounding temperature increases the growth of the spark kernel but supplies less electrical energy. Also the result shows that , in case of direct current discharge, deposited electrical energy is able to be expressed in linear function of time approximately.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.95-102
• /
• 1992

In this study, we tried to describe the quantitative model of TiN film structure which was deposited by PECVD process. The macro-grain growth behavior was studied at the various deposition pressures and times. As a result, It was confirmed that TiN films had the typical Zone 1 structure, and macro-columnar grains were, without reference to the deposition pressure, grown ballistic type by the growth-death competition following the equation, $Y=aX^2$, approximately obtained by regression analysis. Also, the thickness and the crystallization of TiN thin films were increased, the chlorine contents were decreased according to the decreasing of deposition pressure.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.11-23
• /
• 1998

Many empirical research surveys have supported that Organizational Citizenship Behavior (OCB) is influnced by or closely related with leadership styles. The first purpose of this study is to review the relationship between 2 leadership styles(employee-centered style, job-centered style) and 2 OCB factors(altruism, conscientiousness) as a criterion variable, and the second and primary purpose is to test the moderating effects of structural factors(formalization, centralization) and personal factors(growth needs, sex, age, tenure, rank, occupation, school career) between 2 leadership styles and 2 OCB factors. For the analytical purpose of this article, Fisher's Z-transformation and SGC(split groups correlations) methods were introduced. Generally 2 leadership styles are found to influence on altruism and conscientiousness respectively. Out of 36 cases, only 2 cases were significant in moderating effects. Based on empirical results, there is no moderating effects in conscientiousness. But altruism is found to more closely related with employee-centered leadership in low centralized group than on high centralized group, and more closely related with job-centered leadership in low growth-needs group than in high growth-needs group.

• International Journal of Railway
• /
• 제5권2호
• /
• pp.71-76
• /
• 2012

Recently, axle load, operating speed and traffic density on railroads have had a tendency to increase and thereby cause additional pressure applied on used track. These operating conditions frequently result in service failure due to wear caused by wheel-rail contact and fatigue damage under cyclic loading. Among rail defects, the transverse crack, which has been the most dangerous type of fatigue damages, is developed from the subsurface crack near the rail running face and grows perpendicular to the rail surface. Therefore, it is necessary to investigate systematically the growth behavior of transverse crack for rail steel under mixed mode. In this study, the fatigue crack growth behavior of the transverse crack in rail steel was experimentally investigated under mixed-mode variable amplitude loadings.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.89-95
• /
• 2000

Creep-fatigue crack growth behavior at the heat affected zone of 1Cr-0.5Mo steel weldment has been experimentally studied. Load hold times of the tests for trapezoidal fatigue waveshapes were varied among 0, 30, 300 and 3,600 seconds. Time-dependent crack growth rates were characterized by the {TEX}$C_{t}${/TEX} estimated with the equation proposed by the previous finite element analysis work. It was concluded that the {TEX}$C_{t}${/TEX} values calculated from the properties of parent metal were quite comparable to the accurate {TEX}$C_{t}${/TEX} values calculated from both of weld and parent metals. Scatter of data was claimed due to the difference of exact location of the cracks in HAZ. The cracks have a tendency to change their path from the original location eventually to the relatively soft HAZ(ie, near-FGHAZ region, fine grained heat affected zone).