• The Journal of Asian Finance, Economics and Business
• /
• 제8권8호
• /
• pp.325-334
• /
• 2021

The study investigates the effectiveness of the macroprudential policy on credit growth in Vietnam. The authors use the logic of the transmission mechanism of macroprudential policy on credit growth. Research variables include economic growth, inflation, interest rate, and quarterly bank-level data from 28 commercial banks in Vietnam during 2011-2018. The results reveal that: (i) GDP growth had a positive impact on credit growth of small banks but had no impact on large banks, (ii) Domestic Systemically Important Banks (D-SIBs) and small banks respond differently to macroprudential measures of imposing different credit growth targets for different bank groups, (iii) Restrictions on foreign currency loans are found to be effective in curbing credit growth for the full sample and small banks, (iv) Inflation and economic cycle have significantly impacted credit growth at bank-level in Vietnam and (v) Interestingly, a significant positive relationship between interest rates and credit growth is found for the full sample and D-SIBs in Vietnam. The findings suggest that a stable macroeconomic environment should be good conditions for financial stability, and monetary authority should pay more attention to small banks' behaviors than D-SIBs behavior, toward such "administration" tools since small banks tend to prefer "breaking the rules" to make profits.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1083-1089
• /
• 2002

알루미나 세라믹스에 MgO와 $TiO_2$를 각각 단독으로 첨가했을 때의 치밀화와 소결 거동을 수축률-소결 밀도 관계를 통해 비교 조사하였다. MgO가 첨가되었을 때는 소결 전과정을 통해 입성장은 억제되고 치밀화는 촉진되었으나, $TiO_2$가 첨가되었을 때는 입성장은 촉진된 반면 치밀화는 떨어졌다. 또한 입자 크기, 밀도, 수축률등을 통해 수축률-소결 밀도 관계를 구하여 최대 수축률을 나타내는 밀도값(Density of Maximum Shrinkage Rate:${\rho}$J.S.R)을 조사해 보았다. 이때 최대 수축률을 나타내는 밀도값보다 낮은 밀도를 보이는 영역에서는 치밀화가 입성장보다 우세하게 진행되었으며 최대 수축률을 나타내는 밀도값보다 높은 밀도의 영역에서는 입성장이 보다 우세하게 진행되는 것으로 추정하였다. 이때 최대 수축률을 나타내는 밀도값은 $TiO_2$가 첨가된 알루미나 < 순수 알루미나 < MgO가 첨가된 알루미나의 순서로 높은 값을 보였다.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2020

The grain growth behavior of M-type Sr hexaferrite (SrM) grains is investigated with the addition of MnCO₃. First, the SrM powder is synthesized by a conventional solid-state reaction. The powder compacts of SrM are sintered at 1250℃ for 2 h with various amounts of MnCO₃ (0, 0.5, 1.0, and 4.0 mol%). There is no secondary solid phase in any of the sintered samples. Relative density increases when MnCO₃ is added to the SrM. Obvious abnormal grain growth does not appear in any of the SrM samples with MnCO₃. The average grain size increases when 0.5 mol% MnCO₃ is added to the SrM. However, as the amount of MnCO₃ increase to over 0.5 mol%, the average grain size decreases. These observations allow us to conclude that the growth of SrM grains is governed by the two-dimensional nucleation grain growth mechanism, and the critical driving force for the growth of a grain decreases as the amount of MnCO₃ increases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권5호
• /
• pp.655-658
• /
• 2004

Heat stress is known to affect physiological systems in goats. This study investigated changes in nutrient digestibility, behavior and growth hormone secretion among goats in a hot environment (H; 35${\pm}$ 1.2$^{\circ}C$, [RH] 80${\pm}$7.2%, 13 d), and in a thermoneutral environment (T; 20${\pm}$0.6$^{\circ}C$, [RH] 80${\pm}$3.4%, 20 d), and accompanied by the same restricted diet as provided in the hot environment. The following results were obtained: rectal temperature and water intake were higher in the H treatment than in the T treatment or TR treatment, while hay consumption was lower. CP, NDF and ADF digestibility was highest in H treatment. Time spent eating in the H treatment was also the highest, followed in order by T treatment and TR treatment. Ruminating time was lower in H treatment than in T treatment or TR treatment, and reposing time was highest in the TR treatment. Growth hormone concentrations in T increased 4.5 h after feeding. In H, growth hormone concentrations increased 0.5 h after feeding. However, growth hormone concentrations were not changed following TR feeding. In conclusion, heat exposure in goats decreased feed intake, but increased digestibility. However, when goats in a thermoneutral environment received the same restricted feeding as they received in the hot environment, digestibility increased. Between the H treatment and TR treatment, the changes in digestibility were accomplished by coordinate changes in hormone secretion in order to maintain body homeostasis. To maintain energy balance under a hot temperature or a restricted feeding condition, goats may control their metabolism by changing growth hormone release.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.87-92
• /
• 2014

The Notched Ring Test(NRT) has proven to be very useful in determining the slow crack growth behavior of polyethylene pressure pipes. In particular, the test is simple and an order of magnitude shorter in experimental times as compared to the currently used Notched Pipe Test(NPT), which makes this method attractive for use as the accelerated slow crack growth test. In addition, since the NRT specimen is taken directly from the pipe, having maintained the cross-section, processing induced artifacts that would affect the slow crack growth behavior are not altered. This makes the direct comparison to the slow crack growth specimen in pipe from more meaningful. In this study, for comparison with other available slow crack growth methods, including the NPT, the stress intensity factor equation for NRT specimen was developed and demonstrated of its accuracy within 3% of that obtained from the finite element analysis. The equation was derived using a flexure formula of curved beam bending along with numerically determined geometric factors. The accuracy of the equation was successfully tested on 63, 110, 140, 160, 250, and 400 mm nominal pipe diameters, with crack depth ranging from 15 % to 45 % of the pipe wall thickness, and for standard dimensional ratio(SDR) of 9, 11, and 13.6. Using this equation the slow crack results from 110SDR11 NRT specimen were compared to that from the NPT specimen, which demonstrated that the NRT specimen was equivalent to the NPT specimen in creating the slow crack, however in much shorter experimental times.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.341-346
• /
• 2002

In this study, an effect that compressive residual stress formed by shot-peening the surface of spring steel(JISG SUP-9) at each shot velocity(1800, 2200, 2600, 3000rpm) on the fatigue crack growth property and threshold stress intensity factor, ${\Delta}K_{th}$, was examined. Followings are the result (1) Compressive residual stress on surface of specimen was determined at each -601 MPa(1800rpm), -638 MPa(2200rpm), -587 MPa (2600rpm), -550 MPa(3000rpm) by shot velocity of shot peening and threshold stress intensity factor, ${\Delta}K_{th}$, fatigue crack growth rate, da/dN, on fatigue crack growth is obstructed by the compressive residual stress was determined at each $5.619\;MPa\sqrt{m}$(Un-peening), $8.319\;MPa\sqrt{m}$(1800rpm), $8.797\;MPa\sqrt{m}$(2200rpm), $7.835\;MPa\sqrt{m}$(2600rpm), $7.352\;MPa\sqrt{m}$(3000rpm) (2) Existing compressive residual stress by effect of shot velocity of shot-peening on relation of crack length. a, and number of cycle, N, was 2 times progressed in case of 2200rpm than specimen of Un-peening on fatigue life. And fatigue life was 1.6 times progressed incase of 3000rpm by Over peening. (3) Fatigue life of Material on Paris' law, $da/dN=C({\Delta}K)^m$, that effect of material constant, C, and fatigue crack growth exponent, m, was influenced by effect of. C and m.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.191-197
• /
• 1987

본 논문에서는 이상과 같이 그 중요성이 인정되는 작은 표면피로균열의 성장 특성을 조사하기 위하여 연강과 중탄소강에 두 종류의 작은 표면결함을 가공한 네가지 종류의 시험편을 제작하고, 응력비 R=-1인 소야식 회전굽힘 피로시험을 통하여 작은 표면결함이 피로강도에 미치는 영향과 그 성장특성을 조사한 후 응력확대계수 K를 사 용하는 방법과 반복전스트레인 확대계수범위 .DELTA. $K_{\epsilon}$t/를 비교 검토하여 그 유효성 을 조사하고 이를 파괴역학적 측면에서 고찰하였다.다.

• 한국수산과학회지
• /
• 제56권4호
• /
• pp.541-548
• /
• 2023

Behavior serves as an important indicator of the effects of environmental stressors on organisms. In this study, one-year-old abalone Haliotis discus hannai (15.1±0.8 mm) were used and each 0.34 m2 tank was stocked with 100, 150, 200, 250, and 300 juvenile abalone. After 328 days, we found that the low stocking density treatment showed significantly higher growth, whereas the high stocking density treatment showed significantly lower growth. In addition, abalone showed a lower rate of movement, distance moved, and velocity at higher stocking densities, but only velocity differed significantly. In contrast, In the Supplied the feed tanks significant difference between the moving distance and velocity. When the two groups of different sizes were mixed in tank, the rate of movement, distance moned, and velocity showed significant differences between differently-sized indivisuals. Our study indicates that breeding abalone at high densities has a negative effect on their growth and survival, which is thought to primarily be caused by spatial competition, and secondarily by differences in body size, ultimately affecting growth and productivity.

• 한국표면공학회지
• /
• 제57권1호
• /
• pp.22-30
• /
• 2024

This study reports a direct growth of carbon nanotubes (CNTs) on the surface of LiCoO₂ (LCO) powders to apply as highly efficient cathode materials in lithium-ion batteries (LIB). The CNT synthesis was performed using a thermal chemical vapor deposition apparatus with temperatures from 575 to 625 ℃. Ferritin molecules as growth catalyst of CNTs were mixed in deionized (DI) water with various concentrations from 0.05 to 1.0 mg/mL. Then, the LCO powders was dissolved in the ferritin solution at a ratio of 1g/mL. To obtain catalytic iron nanoparticles on the LCO surface, the LCO-ferritin suspension was dropped in silicon dioxide substrates and calcined under air at 550℃. Subsequently, the direct growth of CNTs on LCO powders was performed using a mixture of acetylene (10 sccm) and hydrogen (100 sccm) for 10 min. The growth behavior was characterized by scanning and transmission electron microscopy, Raman scattering spectroscopy, X-ray diffraction, and thermogravimetric analysis. The optimized condition yielding high structural quality and amount of CNTs was 600 ℃ and 0.5 mg/mL. The obtained materials will be developed as cathode materials in LIB.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권3호
• /
• pp.165-175
• /
• 2006

사면거동 및 파괴를 분석하기 위하여, 일반적으로 암반사면에는 Polynomial model, 토사사면에는 Growth model을 별도로 적용하여 사용하여 왔다. 이 기법은 사면의 파괴예측보다 사면의 누적변위를 묘사하기 위한 그래프 형태 위주이다. 따라서 본 연구에서는 사면의 거동보다는 파괴 예측에 초점을 맞추어 일반적으로 사용되는 두 모델을 병합하여 파괴예측을 위한 Asymptote(점근선)과 누적변위량도 같이 묘사할 수 있는 3차 방정식 모델 (3-degree polynomial model)로 단일화 할 것을 제안하여 현장 계측 data를 분석하였다. 국도 절취 사면부인 단양군 고수재 사면과 영덕군 축산면에 위치한 영덕 사면에 본 해석 모델을 적용하였다. 고수재는 토사사면으로 Growth model에 다른 거동을 나타내었고, 영덕사면은 Polynomial model에 따른 거동을 나타내었다. 분석결과, Polynomial model 과 Growth model로 구분된 해석 모델 형태를 $y=ax^3+bx^2+cx+d$ 의 형태를 가지는 3차 방정식을 사용하면, 하나의 모델로 사면의 거동 및 파괴를 해석할 수 있으며, 그 거동 해석 및 파괴 예측능력이 더 우수하다는 것이 증명되었다. Polynomial model의 경우, 방정식의 차수를 증가시켜도, 그래프의 $R^2$값과 형태가 유사함을 알 수 있었다.