• Structural Engineering and Mechanics
• /
• 제53권2호
• /
• pp.311-324
• /
• 2015

The purpose of this study was to investigate experimentally the fatigue performance of reinforced concrete (RC) beams with hot-rolled ribbed fine-grained steel bars of yielding strength 500MPa (HRBF500). Three rectangular and three T-section RC beams with HRBF500 bars were constructed and tested under static and constant-amplitude cyclic loading. Prior to the application of repeated loading, all beams were initially cracked under static loading. The major test variables were the steel ratio, cross-sectional shape and stress range. The stress evolution of HRBF500 bars, the information about crack growth and the deflection developments of test beams were presented and analyzed. Rapid increases in deflections and tension steel stress occured in the early stages of fatigue loading, and were followed by a relatively stable period. Test results indicate that, the concrete beams reinforced with appropriate amount of HRBF500 bars can survive 2.5 million cycles of constant-amplitude cyclic loading with no apparent signs of damage, on condition that the initial extreme tensile stress in HRBF500 steel bars was controlled less than 150 MPa. It was also found that, the initial extreme tension steel stress, stress range, and steel ratio were the main factors that affected the fatigue properties of RC beams with HRBF500 bars, whose effects on fatigue properties were fully discussed in this paper, while the cross-sectional shape had no significant influence in fatigue properties. The results provide important guidance for the fatigue design of concrete beams reinforced with HRBF500 steel bars.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1089-1095
• /
• 2011

열전달 향상을 위한 방법으로 많이 사용되고 있는 마이크로 핀을 포함한 표면 위에서의 핵비등을 액상과 기상에서 질량 및 운동량, 에너지에 대한 지배 방정식을 풀어 수치해석을 수행하였다. 핵비등에서의 기포거동을 계산하기 위해 sharp-interface 레벨셋(level-set) 방법을 상변화 효과와 핀과 캐비티와 같은 잠긴 고체에서의 점착 조건 및 접촉각, 마이크로 액체층에서의 증발 열유속을 포함하도록 수정하였다. 핀과 캐비티를 포함한 표면에서의 기포 생성, 성장, 이탈에 대한 해석을 통하여 핀-캐비티 배열, 핀-핀 간격이 핵비등에서의 기포거동에 중요한 역할을 하는 것을 확인하였다.

• 한국자기학회지
• /
• 제19권3호
• /
• pp.94-99
• /
• 2009

Pulsed Laser Deposition 방법으로 합성된 $La_{0.7}Ca_{0.3}MnO_3$ 박막의 물리적 특성을 증착 조건에 따라 조사하였다. 기존에 알려진 바와는 매우 달리 매우 낮은 산소 분압 ($1.0{\times}10^{-5}$, $1.0{\times}10^{-6}Torr$)에서도 큐리 온도가 높은 박막의 합성이 이루어졌으며 이는 박막의 합성 과정에서 쳄버 내부의 산소 분압보다는 플라즈마 plume의 모양과 그 내부 물질들의 운동에너지가 박막의 질을 결정하는 매우 중요한 요소임을 의미한다. 이러한 양질 박막의 합성 증착 조건을 이용하여 $La_{0.7}Ca_{0.3}MnO_3$ 을 Nb가 도핑된 $SrTiO_3$ 기판위에 증착함으로써 p-n 접합을 제작하였으며 이의 전류-전압곡선이 정류 특성을 보였고 그 모양은 자기장에 의해 바뀔 수 있음을 확인하였다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1993년도 제27차 학술대회 초록집
• /
• pp.85-85
• /
• 1993

후두 편평세포암은 종양세포의 생물학적 특성과 발생부위별 미세환경이 다르기 때문에 임상적 병기만으로 예후를 추정하는 것은 다소 문제점이 있다. 이에 저자들은 종양세포의 유전정보에 의한 증식능이 예후와 연관성이 있는지 규명하고자 EGFR, p53 단백 및 pRB의 표현양상을 후두 편평세포암 40례의 임상적 특성과 비교 검토하여 다음과 같은 성적을 얻었다. 1. p53 단백의 양성 표현율은 임상적 병기, 원발병소의 병기, 경부 림프전이절의 병기, 병리조직학적 분화도, 재발이나 원격전이 흑은 이차암이 있었던 경우와 연관성이 높았다. 2. pRB의 음성 표현율은 침습성이 강한 성문상분, 임상적 병기, 원발병소의 병기, 병리 조직학적 분화도, 재발이나 원격전이 혹은 이차암, 치료에 실패한 경우와 연관성이 높았다. 3. 3년생존율은 p53의 양성표현율과 관계가 있었다. 4. EGFR은 특별한 상관관계가 없었다. 이상의 결과로 보아 p53 단백과 pRB의 암억제유전자 단백의 면역조직화학적 염색을 통한 표현양상은 후두 편평세포암의 생물학적인 특성을 잘 반영하고 있을 뿐만 아니라 종양 즉 인자들과 밀접한 상관관계가 있어 후두 편평세포암의 악성도를 예측하는데 도움을 주는 예후인자로서 적용시킬 수 있을 것으로 생각된다.

• Imaging Science in Dentistry
• /
• 제36권3호
• /
• pp.169-175
• /
• 2006

The Inflammatory myofibroblastic tumor (inflammatory pseudotumor) is a rarely occurring soft tissue lesion of unknown etiology. It can be of any location, but commonly it is found in lungs. It has been considered as a nonneoplastic reactive inflammatory lesion, but nowadays, confusion and dispute about its character is increasing due to its high recurrence rate and metastasis. We present a patient who had been diagnosed with an inflammatory pseudotumor in the right maxilla area, 1 year before visiting our hospital. After that, her pain and swelling did not resolved and she visit our hospital. On radiographic examination, aggressively infiltrative growth of the lesion with destruction of adjacent bony structure was noted. We found unusual aggressiveness of the inflammatory myofibroblastic tumor of the head and neck region. Because the typical behavior of the inflammatory myofibroblastic tumor is not defined yet, we recommend the surgical excision of the lesion and close follow-up.

• Tuberculosis and Respiratory Diseases
• /
• 제38권1호
• /
• pp.74-82
• /
• 1991

Bronchial carcinoid is one of the unusual tumors of the lung, accounting for 1 percent of all lung tumors. Carcinoids, like small cell carcinomas, are generally considered to be derived from a neurosecretary type of cell of the respiratory epithelium, the Kulchtsky's cell. So, they are no longer classified as bronchial adenoma, and are recently grouped into the neuroendocrine group of tumors, the so-called APUD (Amine Precursor Uptake Decarboxylase) group of tumors. Although usually characterized by a slow growth pattern and a low incidence of metastatic disease, bronchial carcinoids should no longer be considered as beingn, and a much higher malignant behavior has been described with a special destignation of 'atypical carcinoid'. Bronchial carcinoids are histologically confirmed by the azurophil staining and the presence of the characteristic neurosecretary granule on electron microscopy. Recently we experienced two cases of bronchial carcinoid, the first case, being peripheral-located and histologically proven as atypical carcinoid, and the second, being central-located and hitologically typical. So we report these cases with a review of the literature.

• Child Health Nursing Research
• /
• 제2권2호
• /
• pp.5-18
• /
• 1996

The purposes of this study were to measure the degree of perceived uncertainty and to identify the rearing attitudes of mothers with chronically ill children, and to examine the relationship between the perceived uncertainty and the rearing attitude of these mothers. The subjects of this study consisted of 133 mothers with chronically ill children, registered at 2 university hospitals in Seoul. Data was collected from April 1 to May 31, 1996. The Parents' Perception of Uncertainty Scale(28-item 4 point scale) and the Maternal Behavior Research Instrument (49-item 5 point scale) were used. Data was analyzed by Cluster analysis, ANOVA MANOVA and t-test. Results of this study are summarized as follows : 1. Mothers perceived their uncertainty to be slightly high (Mn 2.48). The degree of perceived uncertainty by the four components slightly differed unpredictability(2.72), lack in clarity(2.58), vagueness (2.52) and lack of information(2.04) . The degree of perceived uncertainty of mothers with ill children revealed to be influenced significantly by the age of the ill children, duration of illness after the diagnosis, and the experience of hospitalization. 2. Among the rearing attitudes : moderatlely high affective(Mn 3.98) and resrictive(Mn 3.58) attitudes of mothers toward their ill children were identified. Mothers tend to give positive evaluations of their childrens' behaviors (Mn 3.38) and less rejection(Mn 2.81). 3. Mothers' rearing attitude were correlated with the degree of perceived uncertainty in illness ; mothers in the Low Perceived Uncertainty Group (Mn 1.99) revealed the highest affective (Mn 4.08), the lowest resrictive(Mn. 2.72) attitudes and tendency to give positive evaluations of their childrens' behaviors (Mn 3.54) compared to the High Perceived Uncertainty Group(Mn 3.26) and Moderate Perceived Uncertaity Group(Mn 2.57). 4. The degree of perceived uncertainty, the duration of illness after the diagnosis and the experience of hospitalization revealed to be significantly influential to the rearing attitude of mothers with chronically ill children. From the above results, it can be concluded that predicting and controlling mothers' uncertainty are necessary for improved, efficient nursing interventions and normal growth & development of the chronically ill children.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.847-858
• /
• 2013

Since 2001, a series of five irradiation test campaigns for atomized U-Mo dispersion fuel rods, KOMO-1, -2, -3, -4, and -5, has been conducted at HANARO (Korea) in order to develop high performance low enriched uranium dispersion fuel for research reactors. The KOMO irradiation tests provided valuable information on the irradiation behavior of U-Mo fuel that results from the distinct fuel design and irradiation conditions of the rod fuel for HANARO. Full size U-Mo dispersion fuel rods of 4-5 $g-U/cm^3$ were irradiated at a maximum linear power of approximately 105 kW/m up to 85% of the initial U-235 depletion burnup without breakaway swelling or fuel cladding failure. Electron probe microanalyses of the irradiated samples showed localized distribution of the silicon that was added in the matrix during fuel fabrication and confirmed its beneficial effect on interaction layer growth during irradiation. The modifications of U-Mo fuel particles by the addition of a ternary alloying element (Ti or Zr), additional protective coatings (silicide or nitride), and the use of larger fuel particles resulted in significantly reduced interaction layers between fuel particles and Al.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1327-1334
• /
• 1988

본 연구에서는 회전굽힘응력하에서 비관통노치를 갖는 재료의 피로거동을 분 석하기 위하여 우선 시험편의 반지름에 해당한 심공노치를 갖는 시험편을 준비하고 이 시험편이 고, 중간, 저응력을 받는경우 작용응력의 대소에 의한 표면 및 내부크랙전파 특성과 함께 크랙면형상변화 관계를 검토하였다.

• 한국재료학회지
• /
• 제5권6호
• /
• pp.627-632
• /
• 1995

고출력 IC회로의 방열재료 및 전기접점재료로 이용되고 있는 W-Cu복합재료를 기계적합금화법으로 제조하였다. 기계적합금화한 분말을 300MPa로 폭 16mm, 높이 4mm의 원반형으로 제조하였다. 소결은 120$0^{\circ}C$에서 140$0^{\circ}C$까지 수소분위기에서 행하였다. 이렇게 제조된 시편의 절단된 면을 연마하여 SEM으로 관찰하였다. 균질한 W-Cu복합재료를 10시간 기계적합금화를 행한 후에 얻을 수 있었고, 133$0^{\circ}C$에서 1시간 소결한 시편의 경우 거의 99%에 가까운 치밀한 조직을 얻을 수 있었다. 또한 기계적합금화시간이 증가함에 따라서 Fe의 혼입은 직선적으로 증가하였으며, 이로 인한 금속간화합물상의 형성은 W입자 성장을 방해하고 경도를 증가시켰다.