• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.9-17
• /
• 2010

최근 들어, 차세대 무선 광대역 통신 시스템의 전송 방식으로 큰 관심을 받고 있는 OFDM (Orthogonal Frequency Division Multiplexing) 시스템은 다수 반송파 전송의 특수한 형태로 볼 수 있으며 하나의 데이터열이 보다 낮은 데이터 전송률을 갖는 부반송파를 통해 전송된다. OFDM을 사용하는 중요한 이유 중 하나는 OFDM을 사용하면 주파수 선택적 페이딩이나 협대역 간섭에 대한 강건함이 증가하기 때문이다. 하지만 출력 신호의 크기가 Rayleigh 분포를 갖기 때문에 무선 통신 환경에서 SSPA (Solid State Power Amplifier)와 같은 고출력 증폭기 (High Power Amplifier; HPA)의 비선형 특성으로 인하여 단일 반송파 전송 방식보다 심각한 비선형 왜곡이 발생하게 된다. 본 논문에서는 OFDM 신호의 높은 PAPR (Peak-to-Average Power Ratio)과 HPA의 비선형성에 의한 신호의 왜곡과 스펙트럼의 확산을 방지하기 위해 canonical piecewise-linear (PWL) 모델 기반의 디지털 사전왜곡기를 제안한다. 제안된 사전왜곡기의 성능평가를 위해 AWGN (Additive White Gaussian Noise) 채널 하에서 QPSK, 16-QAM, 64-QAM 변조 방식을 이용하고, 1024-point FFT/IFFT로 구현된 OFDM 시스템에 대한 모의실험을 실시한 결과, 비트오율과 비선형성 개선측면에서 우수한 성능을 나타내었다.

• 대한화학회지
• /
• 제61권1호
• /
• pp.29-33
• /
• 2017

Formation of Au particles in nonstoichiometric $Cu_{2-x}{^I}Cu{_2}^{II}O_{3-{\delta}}$ ($x{\approx}0.20$; ${\delta}{\approx}0.10$) oxide from aniline + hydrochloric acid mixtures and chloroauric acid in the ratios 30 : 1; 60 : 1; 90 : 1 (S1-S3) by volume and 0.01 mol of copper acetate, $Cu(OCOCH_3)_2.H_2O$, in each case is performed by sol-gel growth. Powder x-ray diffraction (XRD) results show Au particles are dispersed in tetragonal nonstoichiometric dicopper (I) dicopper (II) oxides, $Cu_{2-x}{^I}Cu{_2}^{II}O_{3-{\delta}}$ ($x{\approx}0.20$; ${\delta}{\approx}0.10$). Average crystallite sizes of Au particles determined using Scherrer equation are found to be in the approximate ranges ${\sim}85-140{\AA}$, ${\sim}85-150{\AA}$ and ${\sim}80-150{\AA}$ in S1-S3, respectively which indicate the formation of Au nano-micro size particles in $Cu_{2-x}{^I}Cu{_2}^{II}O_{3-{\delta}}$ ($x{\approx}0.20$; ${\delta}{\approx}0.10$) oxides. Hysteresis behaviour at 300 K having low loop areas and magnetic susceptibility values ${\sim}5.835{\times}10^{-6}-9.889{\times}10^{-6}emu/gG$ in S1-S3 show weakly ferromagnetic nature of the samples. Broad and isotropic electron paramagnetic resonance (EPR) lineshapes of S1-S4 at 300, 77 and 8 K having $g_{iso}$-values ${\sim}2.053{\pm}0.008-2.304{\pm}0.008$ show rapid spin-lattice relaxation process in magnetic $Cu^{2+}$ ($3d^9$) sites as well as delocalized electrons in Au ($6s^1$) nano-micro size particles in the $Cu_{2-x}{^I}Cu{_2}^{II}O_{3-{\delta}}$ ($x{\approx}0.20$; ${\delta}{\approx}0.10$) oxides. Broad and weak UV-Vis diffuse reflectance optical absorption band ~725 nm is assigned to $^2B_{1g}{\rightarrow}^2A_{1g}$ transitions, and the weak band ~470 nm is due to $^2B_{1g}{\rightarrow}^2E_g$ transitions from the ground state $^2B_{1g}$(${\mid}d_{x^2-y^2}$>) of $Cu^{2+}$ ($3d^9$) ions in octahedral coordination having tetragonal distortion.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.715-723
• /
• 2006

Perovskite oxide materials are very important for the electronics industry, because they exhibit promising properties. With an interest in the obvious applications, significant effort has been invested in the growth of highly crystalline epitaxial perovskite oxide thin films in our laboratory. And the desired structure of films was formed to achieve excellent properties. $Y_1Ba_2Cu_3O_{7-x}$ (YBCO) superconducting thin films were simultaneously deposited on both sides of 3 inch wafer by inverted cylindrical sputtering. Values of microwave surface resistance R$_2$ (75 K, 145 GHz, 0 T) smaller than 100 m$\Omega$ were reached over the whole area of YBCO thin films by pre-seeded a self-template layer. For implementation of voltage tunable high-quality varactor, A tri-layer structured SrTiO$_3$ (STO) thin films with different tetragonal distortion degree was prepared in order to simultaneously achieve a large relative capacitance change and a small dielectric loss. Highly a-axis textured $Ba_{0.65}Sr_{0.35}TiO_3$ (BST65/35) thin films was grown on Pt/Ti/SiO$_2$/Si substrate for monolithic bolometers by introducing $Ba_{0.65}Sr_{0.35}RuO_3$ (BSR65/35) thin films as buffer layer. With the buffer layer, the leakage current density of BST65/35 thin films were greatly reduced, and the pyroelectric coefficient of $7.6\times10_{-7}$ C $cm^{-2}$ $K^{-1}$ was achieved at 6 V/$\mu$m bias and room temperature.

• The Plant Pathology Journal
• /
• 제18권6호
• /
• pp.313-316
• /
• 2002

Systemic virus symptoms caused by a Potexvirus were observed on leaves of infected hosta (Hasta spp.) plants cultivated in Seoul, Korea. Symptoms on diseased hosta plants include mosaic, mottle, irregular blotchy patches, and chlorotic spots on or distortion of the leaves. No other viruses, such as Cucumber mosaic virus, Lily symptomless virus, or Potyvirus, were detected from the same plants by electron microscopy and by Western blot and RT-PCR analyses, indicating that they were singly infected by the potexvirus. The symptoms differed among cultivars and species of hosta, and affected the quality of plants for commercialization, as well as, plant growth and flowering of susceptible cultivars. Most of the cultivars and species investigated were susceptible to the virus, while some were not infected by the virus at all. Purified virus particles were of filamentous type with unaggregated forms 540 nm in length, which is a typical potexviral morphology. The virus consisted of a single-stranded RNA molecule of 6 kb long for genome and single component of coat protein (CP) about 27 kDa. The CP strongly reacted with the antiserum against Hosta vims X (HVX), suggesting that the virus is an isolate of HVX. This is the first report of the occurrence and identification of HVX from hosta plants in Korea.

• 한국통신학회논문지
• /
• 제34권4C호
• /
• pp.403-413
• /
• 2009

본 논문에서는 OFDM 신호의 높은 PAPR과 전력 증폭기의 비선형성에 의한 신호의 왜곡과 스펙트럼의 확산을 방지하기 위한 전치 보상기의 설계 기법으로 디지털 영역에서 구현 가능한 p차 역필터를 이용한 방법, 간접 학습 구조를 이용한 방법 그리고 룩업 테이블을 이용한 방법 등 3가지 방식을 설명하고 각각의 성능을 비교 분석하였다. 앞의 두 방법은 다항식을 이용한 방법으로, 계수의 개수가 적어 많은 메모리가 필요 없고 수렴 속도가 빠르고, 진폭과 위상의 보상을 나누어서 구성하므로 복소 계산이 필요 없어 계산도 간단하다. 룩업 테이블 방법은 연산 과정이 간단하기 때문에 구현이 가장 쉬운 장점을 가지지만 위의 두 방식에 비해 많은 메모리를 필요로 하는 단점을 가진다. 모의 실험 결과 간접 학습 구조가 가장 좋은 성능을 가지지만 64QAM 변조 방식을 기준으로 $BER=10^{-4}$에서 최대 SNR 1 dB 정도의 차이를 가지므로 거의 같은 성능을 가진다고 볼 수 있다. 위의 세가지 전치보상기는 증폭기의 에이징(aging)과 환경 변화에 적응적으로 동작하며 구현 상의 요구에 따라 선택될 수 있다.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2585-2593
• /
• 2020

Swift heavy ion (SHI) beam irradiation can generate desirable defects in materials by transferring sufficient energy to the lattice that favours huge possibilities in tailoring of materials. The effect of Ag¹⁵⁺ ion irradiation with energy 200 MeV on spray deposited V₂O₅ thin films of thickness 253 nm is studied at various ion doses from 5 × 10¹¹ to 1 × 10¹³ ions/㎠. The XRD results of pristine film confirmed orthorhombic structure of V₂O₅ and its average crystallite size was found to be 20 nm. The peak at 394 cm^-1 in Raman spectra confirmed O-V-O bonding of V₂O₅, whereas 917 cm^-1 arise because of distortion in stoichiometry by a loss of oxygen atoms. Raman peaks vanished completely above the ion fluence of 5 × 10¹² ions/㎠. Optical studies by UV-Vis spectroscopy shows decrement in transmittance with an increase in ion fluence up to 5 × 10¹² ions/㎠. The red shift is observed both in the direct and indirect band gaps until 5 × 10¹² ions/㎠. The surface topography of the pristine film revealed sheath like structure with randomly distributed spherical nano-particles. The roughness of film decreased and the density of spherical nanoparticles increased upon irradiation. Irradiation improved the conductivity significantly for fluence 5 × 10¹¹ ions/㎠ due to band gap reduction and grain growth.

• 한국통신학회논문지
• /
• 제31권2C호
• /
• pp.191-199
• /
• 2006

본 논문에서는 OFDM 신호의 높은 PAPR과 전력 증폭기의 비선형성에 의한 신호의 왜곡과 스펙트럼의 확산을 방지하기 위하여 $rho$차 역필터 구조를 사용하는 전치 보상기를 구현하는 방안을 제시한다. 메모리가 없는 고전력 증폭기를 다항식으로 모델링 하고 전치 보상기로써 비선형 증폭기 특성의 역모델인 $rho$차 역필터 구조를 이용한다. $rho$차 역필터 구조는 비선형 시스템이 다항식으로 모델링 된다면 다항식의 계수만으로 구현될 수 있으므로 많은 메모리가 필요 없다. 비선형 전력 증폭기 모델의 계수 갱신을 위하여는 LMS, RLS 알고리듬을 모두 사용할 수 있으며 계수의 개수가 적어 수렴 속도가 빠르고 복소 계산이 필요 없으므로 계산도 간단하다.

• 천문학회보
• /
• 제41권1호
• /
• pp.45.1-45.1
• /
• 2016

Spatially rotating magnetic fields have been observed in the solar wind and in the Earth's magnetopause as well as in reversed field pinch (RFP) devices. Such field configurations have a similarity with extended current layers having a spatially varying plasma pressure instead of the spatially varying guide field. It is thus expected that magnetic reconnection may take place in a rotating magnetic field no less than in an extended current layer. We have investigated the spontaneous evolution of a collisionless plasma system embedding a rotating magnetic field with a two-and-a-half-dimensional electromagnetic particle-in-cell (PIC) simulation. In magnetohydrodynamics, magnetic flux can be decreased by diffusion in O-lines. In kinetic physics, however, an asymmetry of the velocity distribution function can generate new magnetic flux near O- and X-lines, hence a dynamo effect. We have found that a magnetic-flux-reducing diffusion phase and a magnetic-flux-increasing dynamo phase are alternating with a certain period. The temperature of the system also varies with the same period, showing a similarity to sawtooth oscillations in tokamaks. We have shown that a modified theory of sawtooth oscillations can explain the periodic behavior observed in the simulation. A strong guide field distorts the current layer as was observed in laboratory experiments. This distortion is smoothed out as magnetic islands fade away by the O-line diffusion, but is soon strengthened by the growth of magnetic islands. These processes are all repeating with a fixed period. Our results suggest that a rotating magnetic field configuration continuously undergoes deformation and relaxation in a short time-scale although it might look rather steady in a long-term view.

• 농업과학연구
• /
• 제47권3호
• /
• pp.533-544
• /
• 2020

In this paper, we conducted a dynamic ex-post assessment on the grape business cessation support System. Based on the analysis results, in the short term, there was an increase in grape price due to a decrease in production and accompanying increases in the prices of consumption substitution items. However, in the long run, grape prices fell again due to an increase in grape production because of the entry of new grape farmers and the growth of adult grape trees. In addition, the analysis showed that the balloon effect caused by the conversion of crops caused indirect damage such as an increase in the production volume of substitution crops and a decrease in prices. When analyzing the social welfare measurement, the results showed that the support system for business cessation increased the overall social welfare due to an increase in producer welfare because of a price increase in the short term, but in the long term, both producer and consumer welfare decreased. In the end, it is necessary to review the system because the government's intervention may cause market distortion and inefficient resource allocation. Above all, it is necessary to minimize the indirect effect of the industry's contraction and balloon effect due to excessive business cessation. For this, conditional support should be provided in parallel with post management rather than unconditional support. In addition, it is necessary to provide a strategic support system that considers substitution items in addition to those items to be supported.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.53-64
• /
• 2012

Deep and narrow welds can be produced by laser welding at high welding speeds with a narrow heat-affected zone (HAZ) and little distortion of the workpiece. This study aims to evaluate the usefulness of laser welding at automobile component manufacture. Microstructure observation, hardness test, tensile test and fatigue life test are performed by using the fiber laser welded SPFC590 steel sheets which is used widely in the manufacture of automotive seat frame. Three kinds of specimens are only a SPFC590 steel plate, quasi-butt joint plate and lap joint plate by laser welding. The following results that will be helpful to understand the static strength, fatigue crack initiation and growth mechanism were obtained. (1) The tensile strength of quasi butt joint specimens nearly equal to base metal specimens, but lap joint specimens fractured in shear area of weld metal. (2) The fatigue strength of quasi-butt joint specimen was approximately 8 percent lower than that of the base metal specimens. Furthermore, the lap joint specimens were less than 86 percent of the base metal specimens. (3) The lap joint fatigue specimens fractured at shear area in high level stress amplitude, while fractured at normal area in low level stress amplitude. From these results, the applicability of the laser welding to the automobile component is discussed.