• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.115-121
• /
• 2012

Sapphire single crystals have been highlighted for epitaxial gallium nitride films in high-power laser and light emitting diode (LED) industries. Among the many crystal growth methods, the Kyropoulos process is an excellent commercial method for growing larger, high-optical-quality sapphire crystals with fewer defects. Because the properties and growth behavior of sapphire crystals are influenced largely by the temperature distribution and convection of molten sapphire during the manufacturing process, accurate predictions of the thermal fields and melt flow behavior are essential to design and optimize the Kyropoulos crystal growth process. In this study, computational fluid dynamic simulations were performed to examine the effects of the crucible geometry aspect ratio on melt convection during Kyropoulos sapphire crystal growth. The results through the evolution of various growth parameters on the temperature and velocity fields and convexity of the crystallization interface based on finite volume element simulations show that lower aspect ratio of the crucible geometry can be helpful for the quality of sapphire single crystal.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.133-140
• /
• 1991

Weight-loss, general-appearante, yellowing, and compositions such as chlorophyll, carotenoid, vitamin C and nitrate, were studied to investigate the influence of pre-(cultivar and growing season) and post-(low-temperature and high-density polyethylene film packaging) harvest factors on the shelf-life and quality of leaf lettuce(Lactuca sativa L). Weight-loss was reduced by the treatment of high-density polyethylene film packaging, and more at $0{\sim}1^{\circ}C$ than $4{\sim}5^{\circ}C$. Leaf-lettuce grown in Winter lost less fresh weight than that grown in Autumn. In experiment on difference between cultivars, the reduction of weight-loss in 'Cheongchima' lettuce was somewhat significant than that in 'Jeokchukmyeon' lettuce. The tendency of changes in general appearance was similar to that of weight-loss. The yellowing of leaf lettuce during the storage was caused by chlorophyll degradation. Vitamin C content before the storage was 128.0 mg/100 g FW. in lettuce grown in Winter, 123.8 mg/100g FW. in that grown in Autumn, and more 'Cheongchima' lettuce than 'Jeokchukmyeon' lettuce. In all treatment, vitamin C content decreased rapidly, and this tendency was more obvious at $4{\sim}5^{\circ}C$ than $0{\sim}1^{\circ}C$. The nitrate content of 'Jeokchukmyeon' was 3812.6 ppm and that of 'Cheongchima' was 2855.6 ppm before the storage. Nitrate content decreased more at $4{\sim}5^{\circ}C$ than $0{\sim}1^{\circ}C$ during the storage.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2010

Although the demand of ready-to-eat (RTE) foods such as Kimbab is growing, large quantities and wide distribution of these foods is difficult due to their short shelf-life, exposed packaging with hygienic risk, and decreased quality at refrigerator temperatures. This study was undertaken to develop preservation and storage methods to extend the shelf-life of RTE rice products using microwave and packaging methods such as vacuum and modified atmosphere packages. RTE rice ball samples inoculated with Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes, Staphylococcus aureus or Bacillus cereus were microwave treated for 0, 30, 60, 90 and 120 seconds. Populations of pathogens on the rice balls were significantly reduced with an increase in treatment time. There were more than 5 log reductions of all pathogens when the samples were microwave treated for 60 seconds. RTE rice balls inoculated with two pathogens (S. aureus and B. cereus) were packaged via air, vacuum, $N_2$ gas, and $CO_2$ gas following microwave treatment for 90 seconds. The initial S. aureus and B. cereus concentration before treatment was 7.60 and 6.59 log CFU/g, and these levels were reduced by 3.37 and 2.18 log CFU/g after microwave treatment. The levels of pathogens were significantly increased during storage time at room temperature. $CO_2$ packaging was the most effective at inhibiting microbial growth among the tested packaging methods. The levels of total mesophilic count, S. aureus and B. cereus after 5 days of storage were 7.7, 8.8 and 9.3 log CFU/g in air packaged samples and 2.4, 3.2 and 8.3 log CFU/g in $CO_2$ gas packaged samples, respectively. However, after 3 days of storage higher levels of B. cereus were observed in all samples, indicating that the samples were not safe to be consumed. Base on these results, microwave treatment and MAP packaging methods using $CO_2$ gas could be used as a potential method for extending the shelf-life of RTE foods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2008

Sodium is known to reduce a plant growth and yields. However, the relationships between physiological response of seedling and salinity stress caused by growing media are not well understood yet. We conducted experiments to investigate change of some parameters including Na, EC, moisture content in media under different air temperature ($15^{\circ}C$, $25^{\circ}C$), and the response of fruit-vegetables such as cucumber, oriental melon on saline conditions originated from horticultural substrate. Volumetric moisture content of media at $15^{\circ}C$ was 70%, but at $25^{\circ}C$ was decreased by 45% within 22 hrs, showing below optimal matric potential, approximately. During reaction time, the increase of Na concentration was significantly greater in saline substrate than in control. The decrease rate of Na concentration according to supplying irrigation water was higher in saline substrate than in control. $CO_2$ assimilation rate and transpiration rate of Korea melon grown in low temperature were decreased with a Na/cation ratio in hydroponic solution. Water saturation deficit was also increased significantly at $15^{\circ}C$ as compare to $25^{\circ}C$. Saline stress during nursery stage induced a reduction of seedling quality, growth and cucumber yield. The results suggest that the relationship between uncontrolled Na uptake of seedling from saline substrate and meteological condition is responsible for saline stress.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.17-26
• /
• 2010

Recently, yellow poplar (Liriodendron tulipifera L.) is getting attention in Korea due to the fast growing and high yield and quality of lumber. But, it is thought that the color difference between heartwood and sapwood may restrict the practical use of it. This study was aimed to enhance the value of yellow poplar lumber by the color control using high temperature heat-treatment, which had been tried for domestic cedar (Kim et al., 2009). The material properties including surface color of yellow poplar lumber were evaluated according to heat treatment conditions. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature about $200^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent of the control. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition. The durability against wood rotting fungi also increased by the heat-treated, but it was not so effective as the case of cedar. The changes of mechanical properties of heat-treated yellow poplar were very similar to that of heat-treated cedar. In order to develop new use of heat-treated yellow poplar, the changes of mechanical properties should be considered. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study of heat-treated wood is needed to scrutinize the causes of changes of material properties.

• Korean Journal of Organic Agriculture
• /
• v.11 no.4
• /
• pp.103-115
• /
• 2003

In order to investigate the possibility for use to control environmental pollution, Kenaf(Hibiscus cannabinus L.) was used to obtain information of their growth and $CO_2$ response under different temperatures and $CO_2$ concentration. The highest percentage of germination and aboveground dry mass of Kenaf were found at 30$^{\circ}C$ and 35$^{\circ}C$ by 89.0% and 3.2g, respectively under different temperatures. The amount of $CO_2$ absorption and aboveground dry mass production of Kenaf were higher than those of maize during the whole growing period and the last sampling of aboveground dry mass of Kenaf and maize were 252.9g and 200.8g, respectively. The highest plant height was found at 400ppm by 131.0cm and the next was in the order of 600ppm by 1293cm, and 800ppm by 108.8cm. Leaf area was higher in the order of 400ppm > 600ppm > 800ppm, whereas leaf dry mass was in the order of 800ppm > 600ppm > 400ppm under different $CO_2$ concentration, showing that leaf became thicker as $CO_2$ concentration was increased. Days from seeding to flowering became shorter by 13 days in 35/25$^{\circ}C$ compared with 25/15$^{\circ}C$ between two temperature regimes and they also became shorter as $CO_2$ concentration was increased. Aboveground dry mass was higher in 35/25$^{\circ}C$ than that of 25/15$^{\circ}C$ between two temperature regimes. while it was increased in the order of 800ppm > 600ppm > 400ppm as CO2 concentration was increased. Temporal changes of leaf dry mass during growth period showed no difference between $CO_2$ concentration in 25/15$^{\circ}C$ , but the highest of it was found at 800ppm in 35/25$^{\circ}C$. The highest temporaI increase of root dry mass was found at 800ppm in 25/15$^{\circ}C$, but 35/25$^{\circ}C$ showed no difference between different $CO_2$ concentration.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.783-789
• /
• 2010

The effective method for heating root-zone during winter season was studied in the aspects of growth, yield and economics for tomato ($Solanum$ $lycopersicum$) in perlite bag culture. There were four root-zone heating treatments: two hours heating from one hour before to one hour after sunrise, four hours from two hours before to two hours after sunrise, 15 hours after sunset, and no heating. The growth characteristics of the upper parts of plants were not significantly different among the treatments, but root volume increased with longer heating of the root zone. The Plant Development Index, using stem diameter and the length between growing tip and the upper flowering truss, showed relation between yield per cluster and growth pattern. The treatment heating for four hours was the most economic in terms of growth and yield of tomato.

• Korean Journal of Ecology and Environment
• /
• v.39 no.4 s.118
• /
• pp.481-488
• /
• 2006

The field scale experiment was performed to examine the performance of the constructed wetland for nonpoint source (NPS) pollution loading reduction. Four sets (0.88 ha each) of wetland and pond system were used. After three growing seasons of the wetland construction, plant coverage increased to about 90% even without plantation from bare soil surfaces at the initial stage. During the start up period of constructed wetlands, lower water levels should be maintained to avoid flooding newly plants, if wetland plants are to start from germinating seeds. The average removal rate of $BOD_5$, TSS, T-N and T-P during the first two years was 5.6%, 46.6%, 45.7%, and 54.8%, respectively. The $BOD_5$ removal rate was low and it might be attributed to the low influent concentration. The early stage of wetland performance demonstrated the effectiveness of water quality improvement and was satisfactory for treating polluted stream waters. From the first-order analysis, T-P was virtually not temperature dependent, and $BOD_5$ and TSS were more temperature dependent than T-N. A pond-wetland system was more effective than a wetland-pond or a wetland alone system in water quality improvement, particularly to reduce T-P. Overall, the wetland system was found to be an adequate alternative for treating a polluted stream water with stable removal efficiency and recommended as a NPS control measures.

• Korean Journal of Ecology and Environment
• /
• v.39 no.4 s.118
• /
• pp.471-480
• /
• 2006

The field scale experiment was performed to examine the performance of the constructed wetland for nonpoint source (NPS) pollution loading reduction. Four sets (each set of 0.88 ha) of wetland (0.8 ha) and pond (0.08 ha) systems were used. Water flowing into the Seokmoon estuarine reservoir from the Dangjin stream was pumped into wetland systems. Water depth was maintained at 0.3-0.5 m and hydraulic retention time was managed to about 2-5 days; emergent plants were allowed to grow in the wetland. The wetland effluent concentrations of $BOD_5$, TSS, and T-N were higher in winter than in the growing season excepting the T-P, and effluent $BOD_5$ concentration was higher than influents in winter. Mass retention of T-N and T-P was stable throughout the year, whereas mass retention of $BOD_5$ and TSS was decreased in winter. $BOD_5$, TSS, T-N, and T-P performance of the experi-mental system was compared with the existing database (North American Treatment Wetland Database), and was within the range of general system performance. From the first-order analysis, T-P was virtually not temperature dependent, and $BOD_5$ and TSS were more temperature dependent than T-N. Overall, the wetland system was found to be an adequate alternative for treating polluted stream water with stable removal efficiency and recommended as a NPS control measures.