• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.19-25
• /
• 2020

This article describes the automated incubator designs for white mushrooms growing. Mongolia has a very long and cold winter, so the process of growing mushrooms is short. Therefore, we aim to design an automated incubator system that has created a favorable artificial environment for mushroom growing by examining the necessary conditions for mushroom growing. This system was designed to be able to hold for some time the required levels of soil moisture, air humidity, soil temperature, air temperature, and CO2 levels. This article presents the results of a system-based experiment that allows you to grow mushrooms for 30 days without human interference.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.539-543
• /
• 1992

The continuous growth method was developed for Mn-Zn Ferrite single crystals. It is a new process that the polycrystalline MnχZn1-χFe2O4 raw materials are supplied continuously from the powder feeding system to the crucible heated by R.F. induction and melted in the crucible, and after the single crystals seed is attached to crucible's hole, the crystals are pulled downward with rotation. Growing the crystals by using the growth method different from the conventional Bridgman or Floating Zone method, we defined the factors having effect on the crystal growing through the pre-experiments. They are temperature distribution in the crucible, melt velocity according to its height, wettability between the crucible's bottom and melt. Therefore, Mn-Zn Ferrite single crystals were to be grown by attaining the appropriate melt height in the crucible, powder feeding rate, temperature gradient between the crucible and interface, crystal growing speed, and this method was confirmed to have possibility for single crystal growing.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.259-270
• /
• 2022

The paper investigates the residual stresses arising in a thermoviscoelastic cylinder as a result of layer-by-layer deposition of material on its lateral surface. Internal stresses are caused by incompatible deformations that accumulate in the assembly as a result of joining parts with different temperatures. For the analysis of internal stresses, an analytical solution to the axisymmetric quasi-static problem of thermoelasticity for a growing cylinder is constructed. It is shown that the distribution of residual stresses depends on the scenario of the surfacing process. In this case, the supply of additional heat to the growing body can significantly reduce the unevenness of temperature fields and reduce the intensity of residual stresses. The most effective is uneven heating, which can be realized, by the action of an alternating current with a tunable excitation frequency. The temperature and residual stresses fields on the growing surface is analyzed numerically for Titanium and Copper materials.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.1063-1068
• /
• 2000

Water treeing in underground distribution power cable is not easy to observe by nondestructive method and it has very complex patterns. This study describes the principles and practices of a continuous observation of initiation and growth of tree in polymeric insulation material using an image measurement technique. Using this technique we could observe water tree and the growing process of electrical tree due to the water tree and the growing process of electrical tree due to the water tree. All of these growing process is analyzed quantitatively by image measurement program composed of borland c++. We fabricated the thin film type specimen to observe water tree easier and also the needle electrode was prepared by etching method using electrolytes. Initiation and the growth of three was observed somewhat different depending on the applied voltage and the water electrode. AgNO$_3$solution electrode accelerates the initiation and the growth of water tree, compared to those of distilled water electrode. The water and the electrical tree occurred by water tree has discontinuous growth characteristic.

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.484-487
• /
• 2009

$SiC_f$/SiC composites with whiskers and pyrolytic carbon (PyC) coated whiskers in the matrix were fabricated for enhancement of the fracture behaviors by the whisker growing assisted chemical vapor infiltration (WA-CVI) process, respectively. $SiC_f$/SiC composites were also prepared by the conventional CVI process as reference material. The mechanical properties and fracture behaviors were analyzed by comparison of the two types of composites prepared by WA-CVI and conventional CVI. The densities of $SiC_f$/SiC composites were in the range of $2.6{\sim}2.65g/cm^3$. The flexural strengths of composite with whiskers and with those coated by PyC were 650 MPa and 600 MPa, respectively. The tensile strength of composites with whiskers was ${\sim}285$ MPa.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.39-45
• /
• 1974

The objects of this study are to induce the experimental equation suitable to estimate the height growing process, and to get some information that could be to reduce the error percent on determining the site index. The height growing process per sample plot were made up from the height age curve getted through the stem-analysis of the dominant tree. The 11 equations were calculated in the functional formulas between the age and the dominant height of Alnus hirsuta, Larix leptolepsis, L. Gmelini, P. koraiensis, Abies holophylla, P. rigida, Q. acutissima and Q. aliena. The suitable equation for estimating the guide curve were selected with the highest correlation and the low standard error with comparision on the age-height distributed map as Fig. 2. The suitable equation is different between the species as their calculated results as follows; The growing process of tree height are occasionally found to be polymorphous in the growth pattern as Fig. 3. By this result, the site index are practically found to be always not constant but shows variation to age in same plot as example 5. So, that the site index are estimated from the height-growth curve to age drawing by the stem-analysis or the polymorphic-curve, are concluded to be suitable on the study of site evaluation.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.709-710
• /
• 2002

Cancer angiogenesis is simulated using a two dimensional model. Governing equation of angiogenesis is a TAE (Tumor angiogenesis factor) conservation equation in time and space. A stochastic process model is utilized to simulate vessel formation, proliferation, and migration to a cancer pellet. Numerical results are presented especially in case of growing cancer.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.1
• /
• pp.17-23
• /
• 2019

The diesel engine generate many pollutants such as PM(Particulate matter) and NOx(Nitrogen oxide). So the SCR(Selective catalytic reduction) must be required to meet the emission standard. The SCR catalyst market is growing rapidly, and the automobile markets using alternative energy sources are growing rapidly. This study deals with optimization of the calcination process the manufacturing process of SCR catalyst to be competitive. The calcination process is a bottleneck and it is required to optimize productivity and accept to be safety, But we cannot trade off anything in terms of safety. We applied DOE(Design of experiments) among many research methods performed in various fields. In order to achieve quality and productivity optimization. The dependent variables in the DOE were selected as NO Conversion(%). The independent variables were selected as the calcination temperature, soaking time and fan speed RPM. the CCD(Central composite designs) constructs response surface using the data onto experience and finds optimum levels within the fitted response surfaces. Our tests are our stability guarantee and efficient together with operation.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1085-1095
• /
• 2024

Objective: The main objective of this study was to determine available energy and nutritional digestibility of extruded cereals and the effect of extrusion on the nutritional value of feed ingredients, aiming to provide scientific basis for efficient application of extrusion in the diets of growing pigs. Methods: In Exp. 1, 48 crossbred growing pigs (Duroc×Landrace×Yorkshire) with an initial body weight (BW) of 34.6±2.2 kg were selected and fed with eight diets (non-extrusion or extrusion) to determine the digestible energy (DE), metabolizable energy (ME), and nutrients digestibility. Eight diets included extruded grains (barley, wheat, sorghum, or broken rice), while four had unprocessed grains. In Exp. 2, 9 diets were formulated including 4 cereals with extrusion or non-extrusion and a N-free diet. In addition, 9 growing pigs (BW = 22.3±2.8 kg) were fitted with T-cannula in the distal ileum and arranged in a 9×6 Youden square design. Results: Results show that apparent total tract digestibility of gross energy, dry matter, organic meal, ether extract, neutral and acid detergent fiber was not affected by the extrusion process and there was no interaction between cereal type and extrusion treatment on DE, ME. However, the apparent total tract digestibility for crude protein (CP) increased markedly (p<0.05). The standardized ileal digestibility (SID) of all amino acids (AA) except for leucine remarkably increased by extrusion (p<0.05). There was an interaction on the SID of arginine, leucine, isoleucine, methionine, phenylalanine, cystine, and tyrosine in growing pigs between type of grain and extrusion treatment (p<0.05). Conclusion: Extrusion increased the ileal digestibility of CP and most AA in cereals, however, the DE and ME of cereals were not affected in growing pigs.

• International Journal of Contents
• /
• v.10 no.4
• /
• pp.83-89
• /
• 2014

This study suggests an effective online guide for foreign teachers who want to teach English in Korean schools. When designing this guide for overseas applicants, there should be a consistent analysis to reflect the process of the system. Thus, this paper provides an analysis and results for an integrated online guide to increase the efficiency based on the pedagogical framework for analysis of the 'ADDIE' model (Analyze, Design, Development, Implementation, and Evaluation). The number of job applicants who wish to teach English in Korea is growing rapidly because Korea is one of the fastest growing economies in the world and the 'Korean Wave' has especially been experiencing significant changes with the development of social network services and digital technologies. As a result, overseas applicants' expectations regarding Korea when they are seeking information and applying is very high, but the aspects of the procedure provided by the government are somewhat disappointing. The paper presents customer needs and specific recommendation for each step of the application process to improve the guide's effectiveness.