• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.325-328
• /
• 2020

This paper demonstrated a voltage-controlled oscillator (VCO) using cost-effective (1-poly 6-metal) mixed signal standard CMOS process. To have the high-quality factor inductor in LC resonator with thin metal thickness, patterned-ground shields (PGS) was adopted under the spiral to effectively reduce the ac current of low resistive Si substrate. And, because of thin top-metal compared with that of RF option (2 ㎛), we make electrically connect between the top metal (M6) and the next metal (M5) by great number of via array along the metal traces. The circuit operated from 2.48 GHz to 2.62 GHz tuned by accumulation-mode varactor device. And the measured phase noise of LC VCO has -123.7 dBc/Hz at 1MHz offset at 2.62 GHz and the dc-power consumption shows 2.07 mW with 1.8V supply voltage, respectively.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.112-116
• /
• 2022

The demand for a rear reflective material is continuing according to the expansion of the bifacial soar module and the effect on the re-reflection of the ground using a back sheet that is not used due to the increase in the supply of the bifacial solar module was confirmed. For analysis, a bifacial solar module with an output of 445W was connected to a single inverter of 49.84kW, and analysis of each two inverters was carried out. In the analysis of the results, it was confirmed that the generation amount increased by 5.25% compared to the case where the back sheet reflective film was not installed and it was confirmed that the increase in the generation amount was the noon time when strong solar radiation was irradiated, not the time of sunrise and sunset.

• 한국철도학회논문집
• /
• 제17권2호
• /
• pp.94-99
• /
• 2014

최근의 신 교통시스템 개발 동향은 주로 지속가능하고 친환경적인 교통수단을 제공하는데 초점이 맞춰져 있다. 그 중에서도, 수요응답형 순환교통(PRT: Personal Rapid Transit) 시스템은 그 가능성 때문에 주목을 받고 있으며, 첨단 전기 자동차(EV) 개발 기술과의 융합을 통해서 경쟁력은 보다 향상되고 있다. 하지만 전기 배터리에 의해 구동되는 차량의 경우 안정적이고 효율적인 운영의 측면에서 기술적인 어려움에 직면하고 있다. 본 논문에서는, 기술적인 난제를 극복하고 전기에너지를 기반으로 한 교통수단의 보급을 증대하기 위하여 태양전지에 의한 보조 전력 공급을 위한 설계적 접근방법에 대해서 모형실험을 통해서 논한다. 그 결과, 실제 차량에 적용했을 시 보조 전원 공급장치로서 일부 서비스 기기에 소요되는 전력량의 대략 11% 정도를 감당할 수 있을 것으로 예측되었다. 특히, 유연소재 태양전지의 장점은 저렴하고 가벼우며 디자인 의도를 최대한 살릴 수 있다는 데 있다. 무엇보다도 유연함과 용이한 부착성은 다양한 분야에서의 확대 적용 가능성을 보여준다.

• 한국농공학회지
• /
• 제14권1호
• /
• pp.2535-2548
• /
• 1972

Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life agriculture and various machincs played a main role in the land reclamation. The best method of land clearing, the time and capacity in the operation and the effect of growing crops should systematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivate 210,000ha of wasteland or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The first stage of productive power increases when weeds were mixed soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning or just removing. 2) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 3) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up of the straight roots was most difficult. But before the roots are pulling-up we do not know the forms of roots. 4) The cutting of soil from upside to under side land clearing method (II) Spent 6 hr 7 min 43 sec per 1 Danbo in doing land clearing and control method spent 4 hr 52 min 30 sec per 1 Danbo in doing land cearing. No significant difference could be found between II treatment type and I treatment type. 5) The volume of soil carried by bulldozer $270.38m^3$ per 1 Danbo in I type and in II type, $368.58m^3$ per 1 Danbo or about 36% increased in II type then in I type. But that is not a significant difference when considering the whole productive power of soil. 6) The land clearing of terrace by bulldozers cannot escape making the embankment slope of about $45^{\circ}$, and 25.3% should be decreased in the area. It is recommended to make use of the embankment slope by planting grass for cows. 7) The time of retary tilling increased 2.3 times or 1 hr 42 min 22 sec per 1 Danbo compared to the timesrequired in the harrowing. Because it mixed the Organic matter on ground and the harrowing of subsoil. 8) The havest of pasture growing on the land reclamation in natural slope is as follows. (a) The none fertilizers with reclaimed block of productivity decresed 1/10 than that of the farmland. Therefore the none fer tilizing in the cultivated pasture is unprofitable. (b) The havest of the manured IV treatment block was the best not only in the kinds of fertilizers but also in the kinds of pasture grass.

• 한국방재학회 논문집
• /
• 제10권4호
• /
• pp.63-68
• /
• 2010

지하공동구는 도시 및 공동주택 단지에 반드시 필요한 전력, 통신, 가스, 송유관, 급 배수, 에너지시설 등을 효과적으로 수용하고 도시기반시설의 확장에 따라 파생되는 여러 가지의 문제점을 해결하기 위한 방안으로 시설물을 한곳으로 모아 유지 및 관리하는 시설이다. 지하공동구가 훼손될 경우 국가안보는 물론 사회전반에 미치는 파장이 지대하므로 화재예방 활동 및 진압대 책상 취약점 등을 분석하여 우리 실정에 맞는 방재 대책을 도출하여 공동구의 설계, 제도적인 문제, 방화시설의 문제, 화재확산현상 등을 분석하여 종합적인 화재위험을 분석하여 화재예방활동과 진압대책을 수립하여야 한다. 지하공동구는 밀폐 폐쇄된 공간이므로 산소공급 부족으로 인한 불완전 연소 등으로 농연, 일산화탄소 등 유독성연소생성물의 발생과 열기의 충만 및 시야장해로 진입이 곤란 하는 문제점이 있다. 이러한 현상은 지상화재보다는 지하 화재의 특수성에 비추어 볼 때 화재예방활동은 물론이고 소방전술에서 취약하므로 화재의 효율적인 소방전술이 되기 위해서는 화재의 특이성을 감안하여 유관기관에서는 현장대응 지휘체제를 확립하고, 대응기관에서는 평상시 공동구에 대한 구조파악과 필요한 각종 정보를 수집 기록하고 24시간 관리공조체제 유지 및 대응기관에서 가상종합훈련을 강화하여야하며 근본적으로 공동구내에 설치되어 있는 케이블의 난연화 불연화 및 연소 확대 방지를 위한 대책 등이 필요하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.269-269
• /
• 2012

A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.220-237
• /
• 2004

China, as a developing country with a great number of population and relatively less energy resources, reasonably emphasizes the nuclear energy utilization development. For the long term sustainable energy supply, as for nuclear application the basic strategy of PWR-FBR-Fusion has been settled and envisaged. Due to the economy and experience reasons the nuclear power and technology development with a moderate style are kept in China up to now. In China mainland apart from two NPPs with the total capacity of 2.1 GWe in operation, four NPPs are under construction and two NPPs are planned for the Tenth Five Year Plan(2001-2005). Also another one or two NPPs are still in discussion. It could be foreseen that the total nuclear power capacity will reach 8.5GWe before the year 2005 and 14-15 GWe before 2010 respectively. As the first step for the Chinese fast reactor engineering development the 65MWt China Experimental Fast Reactor(CEFR) is under construction. The main components of primary, secondary and tertiary circuits and of fuel handling system have been ordered. The reactor building under construction has reached the top namely 57m above the ground. More than one hundred components and shielding doors have been installed. It is planned that the construction of reactor building with about 40,000$m^2$ floor surface will be completed in the end of the year 2002 and envisaged that the first criticality of the CEFR will be in the end of 2005. The second step of the Chinese fast reactor engineering development is a 300MWe Prototype Fast Breeder Reactor which is only under consideration up to now. Some important technical selections have been settled, but its design has not yet started.

• 전자공학회논문지SC
• /
• 제43권4호
• /
• pp.53-59
• /
• 2006

본 논문에서는 새로운 정밀 계측기용 전파 정류 회로를 제안하고 설계하여, 칩으로 구현 후 검증한 것에 대해 기술하였다. 기존의 회로는 회로가 복잡하고, 신호의 출력범위가 공통모드 (VDD/2) 전압부터 제한된 크기의 출력 전압 까지만 동작하는 문제점이 있었다. 제안된 회로에서는 2개의 2x1 먹스, 1개의 차동 차이 증폭기, 1개의 고속비교기를 이용하여 간단하게 구현하였다. 특히 하나의 차동 차이 증폭기를 이용하여 입력된 신호를 접지(Ground) 레벨로 낮추는 기능과 2배 증폭 기능을 동시에 수행하게 함으로서 신호 전압 전 영역 (Vss 부터 전원 전압 VDD 까지)으로 동작하도록 설계하였다. 기존의 회로에 비해 50% 이상의 하드웨어 면적과 소모전력 감소 효과를 얻었다. 제안된 전파정류회로는 0.35 um 1-poly 2-metal 표준 CMOS 공정을 이용하여 구현하여 검증하였다. 칩 면적은 $150um{\times}450um$ 이며 전력 소모는 3.3V 전원 전압에서 840uW이다

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.586-592
• /
• 2014

본 논문에서는 DT-CMOS(Dynamic Threshold voltage Complementary MOSFET) 스위칭 소자를 사용한 DC-DC Buck 컨버터를 제안하였다. 높은 효율을 얻기 위하여 PWM 제어방식을 사용하였으며, 낮은 온 저항을 갖는 DT-CMOS 스위치 소자를 설계하여 도통 손실을 감소시켰다. 제안한 Buck 컨버터는 밴드갭 기준 전압 회로, 삼각파 발생기, 오차 증폭기, 비교기, 보상 회로, PWM 제어 블록으로 구성되어 있다. 삼각파 발생기는 전원전압(3.3V)부터 접지까지 출력 진폭의 범위를 갖는 1.2MHz의 주파수를 생성하며, 비교기는 2단 증폭기로 설계되었다. 그리고 오차 증폭기는 70dB의 이득과 $64^{\circ}$의 위상여유를 갖도록 설계하였다. 또한 제안한 Buck 컨버터는 current-mode PWM 제어회로와 낮은 온 저항을 갖는 스위치를 사용하여 100mA의 출력 전류에서 최대 95%의 효율을 구현하였으며, 1mA 이하의 대기모드에도 높은 효율을 구현하기 위하여 LDO 레귤레이터를 설계하였으며, 또한 2개의 IC 보호 회로를 내장하여 신뢰성을 확보하였다.

• 수산경영론집
• /
• 제24권2호
• /
• pp.1-16
• /
• 1993

Because of the radical changes in the domestic and foreign economic circumstances Koreaa fisheries is confronted with difficulties. Along the end of the UR marine products of other nations are rushing into Korea. Also migration of labor to other industries and rise of wage level in Korean fisheries deteriorate managerial conditions. But in Korea which has little natural resourses fisheries is still more important. That is \circled1 creating job opportunites \circled2 increase of income \circled3 supply of foodstuffs and animal protein \circled4 acquisition of foreign currency \circled5 enlargement of domestic market for industrial products \circled6 development of other interrelated industries \circled7 rational use of domestic resourses \circled8 diversification of population and production activites \circled9 contribution to balanced growth of national economy by the developing regional economy. These roles of fisheries in national economy mentioned above are to be excuted forward. In spite of the radical change in the economic circumstances at the end of the UR fisheries if crucial in Korea as a industry. For this our fisheries is to be made to compete with foreign fisheries. Through the cheap price and high quality our fisheries must be came to compete with foreign fisheries and meet the people's needs for marine products. For this it is necessary to maintain high productivity and competitive power. Now with the exception of a portion of the deep - sea fishing, our fisheries is generally paltry, Especially inshore fishery which is the main stock in our fisheries is very paltry and so productivity and competetive power are very low. So to develop our fisheries which has s comparative disadvantage active polices that follows below are to be promoted on a large scale. \circled1 improvement of structure \circled2 augmentation of productivity in fishing ground by making fisheries resourses \circled3 enlargement of finantial and monetary assistance \circled4 effective administration of fisheries cooperative union \circled5 activation of R&D etc These polices which need to be scientific and comprehensive are very valuable. Especially without making fishieries resources we cannot expect economy of scale, promotion of productivity and development of fisheries. And we do also endeavour to gather the results of the study and investigation about fisheries domestic and foreign and do ceaselessly put these to practical use systimatically.