• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.114-122
• /
• 2002

착륙장치 시스템의 개발은 설계특성상 충격흡수 성능에 대한 설계 파라메터, 최소한의 작동공간, 복잡성 및 중량과 비용 등의 복합적인 관계를 가지고 있다. 특히 항공기 착륙에 따른 지상충격하중 및 동적거동은 착륙장치 자체 구성품 뿐만 아니라 장착구조물의 설계 하중으로 적용되는 중요한 설계분야이다. 본 연구에서는 T-50 착륙장치를 모델로 ADAMS를 이용하여 지상 충격하중 및 동적거동을 해석할 수 있는 프로그램을 개발하였다. 항공기 운용/환경조건을 고려한 충격흡수특성 해석은 다양한 설계경험을 토대로 수행하였다. 설계변수 설정, 완충기에 작용하는 내력정의, 운동방정식을 유도하여 착륙 수직속도, 착륙 자세, 착륙 수평속도, 완충효율, 장착위치 작용하중 등을 고려한 해석결과와 동적거동 특성을 분석하고 제시하였다. 이러한 해석 결과를 바탕으로 향후 새로운 착륙장치 개발시 범용적인 해석이 용이할 뿐만 아니라 지상/비행시험의 문제점 발생시 고장탐구 해결에 활용할 수 있다.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.435-455
• /
• 2012

An impact on the ground surface may represent several phenomena, such as a crash of an airplane or an explosion or the passage of a train. In order to analyze and design structures and equipment to resist such a type of shocks, the response spectra for an impact on the ground must be given. We investigated the half-space motions due to impact using the finite element method. We performed extensive parametric analyses to define a suitable finite element model and arrive at displacement time histories and response spectra at varying distances from the impact point. The principal scope of our study has been to derive response spectra which: (a) provide insight and illustrate in detail the half-space response to an impact load, (b) can be readily used for the analysis of structures resting on a ground subjected to an impact and (c) are a new family of results for the impact problem and can serve as reference for future research.

• Geomechanics and Engineering
• /
• 제30권3호
• /
• pp.293-312
• /
• 2022

Cantilever sheet pile walls having section thinner than masonry walls are generally adopted to retain moderate height of excavation. In practice, a surcharge in the form of strip load of finite width is generally present on the backfill. So, in the present study, influence of strip load on cantilever sheet pile walls is analyzed by varying the width of the strip load and distance from the cantilever sheet pile walls using finite difference based computer program in cohesionless soil modelled as Mohr-Coulomb model. The results of bending moment, earth pressure, deflection and settlement are presented in non-dimensional terms. A parametric study has been conducted for different friction angle of soil, embedded depth of sheet pile walls, different magnitudes and width of the strip load acting on the ground surface and at a depth below ground level. The result of present study is also validated with the available literature. From the results presented in this study, it can be inferred that optimum behavior of cantilever sheet pile walls is observed for strip load having width 2 m to 3 m on the ground surface. Further as the depth of strip load below the ground surface increases below the ground level to 0.75 times excavation height, the bending moment, settlement, net earth pressure and deflection decreases and then remains constant.

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.451-457
• /
• 2015

본 논문은 강체간의 충돌에 의한 충격력에 대한 수학적 정해 및 고준위폐기물 처분용기의 지면 추락낙하사고 시의 충돌충격에의 응용 논문으로 강체간 충돌에 의해 발생하는 충격력 특히 고준위폐기물 처분용기의 지면 추락낙하 충격사고 시 처분용기에 가해지는 충격력을 구하는 기구동역학 수치해석 연구를 수행하였다. 이를 통하여 고준위폐기물 처분용기의 구조안전성 설계과정에서 요구되는 처분용기 처분 시 사고로 추락낙하 하여 지면과 충돌하는 경우 처분용기에 가해지는 충격력을 수치적으로 구하였다. 수치해석 연구의 주된 내용은 기구동역학해석 상용 컴퓨터코드를 이용하여 처분장에서 운반차량으로 처분용기 운반중 사고로 추락낙하 하여 지면과의 충돌 시에 처분용기에 가해지는 충격력을 구하는 기술적인 방법에 관한 것이며 이를 토대로 지면과 충돌하는 처분용기에 발생하는 충격력을 구하는 문제를 수치적으로 다루었다. 이렇게 수치적으로 구한 충격력을 이론적으로 구한 값들과 비교하였다. 비교결과 이론값들과 잘 일치함을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.153-160
• /
• 2016

Purpose: This study was conducted to experimentally investigate the structural safety of and identify critical locations in a front-end loader under impact loads. Methods: Impact and static tests were conducted on a commonly used front-end loader mounted on a tractor. In the impact test, the bucket of the front-end loader with maximum live load was raised to its maximum lift height and was allowed to free fall to a height of 500 mm above the ground where it was stopped abruptly. For the static test, the bucket with maximum live load was raised and held at the maximum lift height, median height, and a height of 500 mm from the ground. Strain gages were attached at twenty-three main locations on the front-end loader, and the maximum stresses and strains were measured during respective impact and static tests. Results: Stresses and strains at the same location on the loader were higher in the impact test than in the static test, for most of measurement locations. This indicated that the front-end loader was put under a severe environment during impact loading. The safety factors for stresses were higher than 1.0 at all locations during impact and static tests. Conclusions: Since the lowest safety factor was higher than 1.0, the front-end loader was considered as structurally safe under impact loads. However, caution must be exercised at the locations having relatively low safety factors because failure may occur at these locations under high impact loads. These important design locations were identified to be the bucket link elements and the connection elements between the tractor frame and front-end loader. A robust design is required for these elements because of their high failure probability caused by excessive impact stress.

• 한국조경학회지
• /
• 제29권6호
• /
• pp.72-81
• /
• 2002

The purpose of this study is to determine the impact of the soil load for artificial ground on a building's structural expenses. Three types of soil - 100% soil, soil mixed with 50% perlite, and 100% artificial soil - were used for this study. A one story concrete steel building specific to each soil load was designed, and then, the cost of steel and concrete used for the design was estimated. As the result of this study, the structural expenses in the case of 5:5 mixed soil can be reduced about 17% compare with 100% soil. Using artificial soil, the structural expenses can be cut about 32% compare to 100% soil and about 12% less when 5:5 mixed soil is used. However, considering total expense which includes the structural expense and soil expense, the expense of 5:5 mixed soil have an increase 25% compared with 100% soil. In the artificial soil, the total expense is 45% more expensive than 100% soil and 17% higher when 5:5 mixed soil is used because of the high unit price of artificial soil. This study expected substantial savings in structural cost as the soil-load was lightened. But, savings were significantly reduced because the unit price of the artificial soil is much more expensive than the price of the natural one. Therefore, further research on methods of reducing the unit price of the artificial soil should be conducted in order to extend green space on to artificial ground.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.245-255
• /
• 2019

In this paper, an inverted-pendulum model consisting of a point supported by spring limbs with roller feet is adopted to simulate human walking load. To establish the kinematic motion of first and second single and double support phases, the Lagrangian variation method was used. Given a set of model parameters, desired walking speed and initial states, the Newmark-${\beta}$ method was used to solve the above kinematic motion for studying the effects of roller radius, stiffness, impact angle, walking speed, and step length on the ground reaction force, energy transfer, and height of center of mass transfer. The numerical simulation results show that the inverted-pendulum model for walking is conservative as there is no change in total energy and the duration time of double support phase is 50-70% of total time. Based on the numerical analysis, a dynamic load factor ${\alpha}_{wi}$ is proposed for the traditional walking load model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.964-968
• /
• 2010

Ground anchor, commonly referred to as tiebacks or tie-down, is essentially steel elements secured in the ground by cement grout. They are used to provide either lateral or vertical support for various engineered structures, and are effective in all types of soil and rock. However, ground anchor can not be used in soft clay because anchor resistance would not be guaranteed. In this paper, conceptual introduction of the Smart Anchor is presented. The Smart Anchor is a kind of friction type anchor, the load is diffused and applied to the various parts of the distributed bond length, having less impact on the grout strength, and being able to secure necessary anchoring force in relatively soft grounds. This study shows a numerical study of predicting the load transfer of The Smart Anchor in soft clay. A beam-column analysis was performed by a elastic-plastic P-y curves in soft clay.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.84-89
• /
• 2021

Recently, shipyards are making many efforts to reduce the number of the mounted blocks by increasing the block size. This is to improve productivity and reduce related costs by minimizing block movement and shortening the building period. However, as the blocks become larger, the weight increases considerably. If the target block has a damage due to an unexpected accident during block lifting, it may seriously cause a problem of the reusability of the block. In this study, a large-sized block of the offshore structure weighing 480 tons was lifting with a total of seven sling belts, and one sling belt was broken while it was moving, resulting in a situation in which a part of the edge of the block collided with the ground. The aim of this paper is to verify the structural integrity of the block that directly collides with the ground in the form of free fall due to the sling breakage. Considering that the hook loads acting on several sling belts holding the block are redistributed when a sling belt is broken, the hook loads were recalculated at the angle just before the sling breakage. These loads were used to check the safety of the sling belts. In addition, FE analysis was performed by calculating the amount of impact from the free fall condition, obtaining the impact area by using Hertz's contact theory, and then applying the impact load to the area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1334-1337
• /
• 2009

A SMART anchor is a kind of friction mount anchor, the load is diffused and applied to the various parts of the distributed bond length, having less impact on the grout strength, and being able to secure necessary anchoring force in relatively soft grounds. Smart anchor can have strong loads in soft and weak grounds as in rock beds.